we created thumbnail image gallery slideshow by using action script with auto and manual,. my requirement is , how to include multiple text link in each and every slideshow. below i mention the script code,
code start here
/********/
stop();
[code]......
i created a flash slideshow with pictures of events and link each picture with its own event (ie. each pictures has its own links to the website). I created the fade in and fade out effect using the class motion tween. With the link, I created a layer with a button that has alpha= 0 (so the user don't see it) and then I used code snippet to make another layer with the action script "click to go to url."
When the slideshow goes to the last picture I made it fade out and the first picture of the slideshow would show up and then the slideshow would replay itself (by default?). My goal is to make a continuous slideshow.
When I tested the swf file, the first time it runs, everything is right. The urls and the pictures are in correct order. However when the slideshow replays itself automatically, I notice that the links are incorrect. In the first play, when I click the picture of the event it would open the url of that event.However when the sldieshow replays, clicking the pictures would only open the url of the first event picture. When I click on the 2nd, 3rd, 4th, etc.pictures the browser opens only the link of the first picture of the slideshow.
How to do a simple slide shows that plays automatically and has transitions in between pictures, can some one direct me in the right direction. So far I have 1 picture that does a transition and it has this action code inside the same frame where the picture is placed at. The pictures were converted into movie clip symbols.
import fl.transitions.*;
import fl.transitions.easing.*;
TransitionManager.start(img1_mc, {
type:Zoom, direction:0, duration:3, easing: Bounce.easeOut});
I only have 1 layer. It works fine, but when I try to put two pictures and test the movie, it does not play automatically, why is this?
Previously I've done all the monkeywork by hand on the timeline, but now I need to make an automated slideshow for an image portfolio that collects pictures from an external folder (1.jpg, 2.jpg, 3.jpg, etc...) so I can just upload variants of the image without having to change the flash file each time.
I'm also hoping to include fading transitions and an easy way to change the amount of time each image is on screen.
I'm trying to create a simple yet effective image slideshow for my homepage. It'll be a bar, 600 pixels wide, by 300 pixels high. There will be 4 buttons that will line the bottom, numbered 1 through 4, that will control 4 separate slides that'll appear in that window. If you don't click anything, the images will fade in and out after x amount of seconds. Clicking on the numbered buttons will load the appropriate slide, and each slide when clicked will take you to a certain part of the website.
I wish to do this in actionscript... not using the timeline as I prefer to do all transitions in actionscript. Can anyone shed light on how to set this up? I've been trying to use the TransitionManager function... however I'm getting mixed results. Here's a screenshot:
Code:
import fl.transitions.*;
import fl.transitions.easing.*;
ss1_mc.alpha = 1;
ss2_mc.alpha = 0;
ss3_mc.alpha = 0;
ss4_mc.alpha = 0;
var currentImage:MovieClip = ss1_mc;
[Code] .....
Forgetting about my last post: This code currently makes it so each picture will fade from white. What I'm trying to do is make the slideshow so that each picture transitions into each other, instead of from white.
p = 0;this.onEnterFrame = function() { filesize = picture.getBytesTotal(); loaded = picture.getBytesLoaded(); if (picture._alpha<100) { picture._alpha += 10; }};[code].....
Creating a jQuery slideshow comprised of several images with transitions is easy. But I'm trying to have a Flash animation (SWF) stand in for one of the items in the slide show. In other words, I'd like to see transitions between the following: We've tried several of the jQuery slideshow plug-ins, but the Flash animation doesn't play well -- for example, if we use a simple dissolve transition, the Flash never disappears
View 1 RepliesI'm new to action script coding and i had found a tutorial to create a flash slideshow which worked great, but now i'm trying to add links to each slide[code]...
View 1 RepliesWould it be possible to use the Kirupa tutorial on "Photo Slideshow Using XML and Flash" and incorporate a dynamic HTML link within the XML so the photos in the slideshow were clickable using Flash MX 2004?[code]
View 1 RepliesI managed to get the swf to load fine on this page (www.diamondraindesign.com) until I added a full-screen invisible button that goes over the slides. It uses the same counter to sync with them so that whenever someone clicks on it they go to the proper page. Unfortunately, now only the link works to the first page item, and sometimes I can't even see the slides 'loading' text, just a white background. If I take the link button out, the slides are fine. Why is the link interferring, and how do I get it to sync and not stop the slides?
View 11 RepliesI'm having trouble figuring out how to get this image slideshow to have separate links for each picture. I've researched online and I can't seem to make sense of what I've found in relation to the code I have.
ActionScript Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
[code]...
many kudos for the xml photo slideshow. [URL]
How would someone go about getting the actionscript to look for another field in the xml file that had a Url link to a webpage for each image that would be activated by clicking on that particular image.
I am trying to have multiple links off site but have hit a brick wall. If I have the code listed below, it opens the second link as soon as you open the links page, If I have the"function onLinkClick (evt)", above btn6_btn I end up with the duplicate error message. Is there a way to have multiple link buttons on a page. I have played with this for hours.
[Code]...
I need to have a series of flv files play with seamless transitions between files. I am using the code provided by the tutorial on the gotoandlearn website (XML Video Playlist) as a basis for my project, but I am eliminating the playback controls and playlist access. I just want to play through the videos on the list, but NOT have any buffering lag-time when moving to the next video.If I just loop through the videos in the XML file, each time a new flv is loaded, it will buffer for a few seconds before beginning to play. I have considered using two NetStream objects so that the second can begin to buffer while the first is playing, but I have not found how to load the NetStream object without actually playing it. ns.seek(0) perhaps?
View 1 RepliesI have a flash file with several layers, each composing of a single movie clip which slides in over the layer below it. The movie clips are nothing more than static images. I would like to make it so that each "slide" links to a different URL.I am new to AS3, and I am just getting back on the flash wagon with this little banner rotating project, so I'm a bit confused with why layers, and timeline positioning seem to be effecting the links.I found a few tutorials online, and can manage to make one link on the bottom layer work, but when I try to expand the code and the file to create links from different movie clips on different layers, I run into problems. when I add the action script for the other buttons, the movie will fail to play by it's self on load. I can get this to work with ode:this.gotoAndPlay(1)at the top of the ActionScript But none of the other links work.Here is what I am using for more than one link:
Code:
backpacks.addEventListener(MouseEvent.CLICK, myButtonFunction);
function myButtonFunction(event: MouseEvent) {
[code].....
I saw it in this site...[URL].. it says "Include code from external sources using #include".umm... does it mean I can use C code, etc. within flash??
View 1 RepliesI saw it in this site...[URL]it says "Include code from external sources using #include".does it mean I can use C code, etc. within flash?
View 1 RepliesI'm trying to pull data from an XML file into a TextArea to take advantage of the scroll bar capabilities.I have two XMLLists, XListCopy & XListURLs. XListCopy is basically a list of words that need to be on their own line. While the XListURLs are the respective links for those words.Since at the moment, I'm using appendText obviously any links will be merged into one. Is there any way to separate each & make each clickable?
View 11 RepliesI have a banner that I'm creating, it has 5 images that rotate via motion tweening. I've created an invisibile button (and also attempted to create multiple buttons) so that when you click on a specific image it will bring you to that URL. So far I have only gotten it to work for the final URL. No matter which image I click on, it only brings up that last URL.
Here is my code:
btn1.addEventListener(MouseEvent.CLICK, buttonClickHandler1);
function buttonClickHandler1(event:MouseEvent):void {
navigateToURL(new URLRequest("http://www.google.com"));
}
[Code]....
we have a project that will be using a flash based 'flip book' to display approximately 3000 products.
The issue is that there needs to be a button placed on each product that will link to the main website.
With out publishing 3000 buttons with different actionscripted links, is there a more automated way to do this?
I'm working on a project for a client and I'm doing something I have never done in Flash. The Flash first loads four images that have been converted to buttons. Those four by itself link correctly, but when I add the code for the next two sets of images the code breaks and none of the links work. I'm not sure what to do. Here is the code for the first two sets of images:
The last two links cause a problem. I get Error 1120 access of undefined object. However, when I click the button and look in the properties box it says Instance of BTN_Adult01 and Instance of BTN_ModelFemale so I'm not sure what the problem is.
I tried to paste my source code but it won't let me because it contains links and I don't have enough posts, but I did attach the file.
I have kind of a follow up question what would the procedure be if I had like a slide show and each slide when you clicked on it there would be multiple links this is the code I have so far: My slideshow instance names are pic_000_mc to pic_004_mc
[Code]....
I know there is a better and more efficient way to do this then to have all five different functions and listeners.
My goal is making a navigation section that is a scrollable box. I thought the easiest solution was to make a dynamic text box and put a scroll bar on it. Worked until it came time to make the links. It is only letting me make one link for all the text. Also I think I want more control for the mouseover look.
View 3 RepliesThe first keyframe of each product has the following actions attached on top of a hot spot linking outbound:
on (release) {
getURL("http://www.site.com/product01");
}
[code]......
I made a flash banner + have photo creds on each photo. I want to make it a link to source to the photographer's portfolio.I've got 5 links for 5 buttons, button1, button2, button3, etc, each is named in the library with a matching name for the instance.I got the link working for the first image, but whenever I try and do it for others I keep getting a message of [code]
View 1 RepliesSWF functions beautifully on its own (i.e., animations play, rollovers work). However, when uploaded to the server and dropped into the HTML with the proper plug-ins, the links suddenly cease to function. Flash still plays beautifully - it's just the links that seem to disappear. The one browser where the links seem to work 'as is' is Firefox on PC.
I am using the basic but usually effective:
on (release) { getURL("http://www.site.com"); }
Sorta-solution:Added "_blank" to the end of the script and this worked in all tested browsers... however, the client wants the URL to open in the same window (they have asked not to provide the actual link). Anyone have a concrete idea as to why and how to fix this?
For the past half-year I've been coding like this:
ActionScript Code:
_root.menu_mc.link1.onRollOver = function () {
_root.menu_mc.link1.text.htmlText = "<FONT COLOR='#000000'>" + "Cool" + "</FONT>";
_root.menu_mc.link1.text.thickness = 100;
[Code].....
I know and I've seen some more efficent code such as, making loops and assigning variables.
get started by making the above code more efficient? I've attached the source file.
I have a very simple flash project that I need to be completed tommorow or my head is in the block! I am new to Flash and Actionscript but work well with PHP so do have some idea of what I am doing but, this has left me stumped and in trouble if I don't get it done! Basically my movie is very simple. I have a background and after a short break my first scene flys on with one link then leaves - then the second with a different link, then the third.
I converted all links to buttons and gave them instance names 'button1_btn', button2_btn' and 'button3_btn' and then added my new layer for the action script. Below is the actionscript I used to make the buttons work:
[Code]...
I'm trying to link all the images in my slideshow to their respective pages in AS2. With the code below:
Code:
stop();
next_btn.onRelease = function() {
if (_root._currentframe == 19) {
[Code].....
it does not work. Do I need separate frames in the action layer or?
LINK to .fla since it's just over the limit.
I am currently developing a banner that contains 4 buttons. Each of these link to different URLs within the website where the banner appears.
The problem:SWF functions beautifully on its own (i.e., animations play, rollovers work). However, when uploaded to the server and dropped into the HTML with the proper plug-ins, the links suddenly cease to function. Flash still plays beautifully - it's just the links that seem to disappear. The one browser where the links seem to work 'as is' is Firefox on PC.
I am using the basic but usually effective:on (release) { getURL("http:url...); }
Sorta-solution: Added "_blank" to the end of the script and this worked in all tested browsers... however, the client wants the URL to open in the same window (they have asked not to provide the actual link).