i want to load an image and give it an instance name to control it, i tried the following code
Code:
for (var i:int = 1; i < 4; i++) { var myLoader:Loader = new Loader(); var fileRequest:URLRequest = new URLRequest("myImage_0" + i + ".gif"); myLoader.load(fileRequest); addChild(myLoader); myLoader.name = "myImage_0" + i; myImage_01.x=100}
the following erroe occured:
1120: Access of undefined property myImage_01.
how can I load in flex spark Image control and wait for complete loading? MX:image have method load() and listen COMPLETE event this is not in spark Image...is there only source?? or how can i listen when image is complete loading??
View 1 RepliesHow can I center a loaded photo [lets say 200x300] in an image control [lets say 400x600]? My image control has fixed dimensions while my contents have different dimensions and I want them to get centered automatically.
View 1 RepliesI am changing image through flex every time i change it saved into server directory with same name(which i am referring to show). So when i refresh my page my browser didn't send new request to server since it's already in request.so didn't getting new image.Tip:- when i clear browser history it will come with new image
View 2 RepliesI am trying to load a colour image and then it is changed to black and white image. Here I am using a mask. But it is not getting worked. The code that i am using for this purpose is attached following: import
[Code]...
I developing a site where on the homepage, there are about 6 images that rotate, but if you click on a sub link, a different image loads. But the problem is that, the first image has to cycle through before the second image loads. I want the second image to load immediately.
[Code]....
I have an application that I'm migrating from flex 3 to flex 4.5. In this application, there is some mx Image components that load a simple swf file (image). Spark image doesn't load swf files, so I was wondering, should I keep the mx Image, or should I change it to SWFLoader? Is there any advantages to using one or the other?
View 1 RepliesWhat would you use to create buttons which when pressed load an image in an image area within the same flash document?
View 1 RepliesThis shouldn't be too difficult, but what I have is a button, which in the 'over' state I want to load an external image, and then have the image disappear when the users mouse hovers off the button
View 2 RepliesI'm creating a moodboard application where the user can dynamically load an image onto the stage by pressing a thumb of the image in a menu item. I have most of that working but what I would like to know is that, if there is a way the user can interactively scale/transform the image when it is on the stage in the swf file?
View 2 RepliesI have an object which is coded in a .as file, let's call it a widget, in widget.as. It is listed in the library as a MovieClip and is in fact a MovieClip. How can I, from the code in widget.as, overlay an image (Bitmap) from the library on it so that the Widget has four parts which can be switched between two different styles independently.
As an alternative, I could make a frame in the MovieClip of Widget for each possibility and make the code switch what frame I am on.
This must work in Adobe Flash CS3 and with ActionScript 3
I need to create an Image control from a Bitmap because I have an ItemRedender to use in a List control.
I'm trying to show a list of images (Bitmaps) in a List control and I couldn't by now.
What was simple is now documented by 15 pages of chicken scratchesI have searched through the docs and am just lostWhat I want to do was simple enough in AS2: onClipEvent (EnterFrame)_root.gotoAndPlay("2");But can't be done now. It doesn't work as a frame action either without the onClipEvent. All I want to do is go from the last frame of the timeline to frame 2 and skip the preloader. How the heck do I do that in AS3? I've searched online and cannot find the method, and perhaps search terms don't work. Anything I can find applies to AS2.
View 12 RepliesI'm loading a swf with the AS3 Loader class. It's being done from a main.swf that has nothing but a preloader display. The content is all in the swf that I'm loading with the Loader class. It's working. But the swf's playhead seems to be already 40 or so frames down the timeline once it's displayed on the stage. So I want to tell the loaded swf to gotoAndPlay(1) after the preload is complete in the relevant handler. The handler fires, but I don't know how to access the swf in question.loader.content returns a DisplayObject and trying to talk to it with MovieClip properties throws errors. I've tried to cast it as a MovieClip based on various things I've seen via searches here and in the docs, but that's failing, too.How does one do this the "right" way?And for that matter, why has the timeline already started to play before the swf is visible on stage?
ActionScript Code:
private function onLoadComplete(event:Event):void {
// what can I do to take _loader.content and make it accessible for a gotoAndPlay() or some
[code].....
I'm trying to load a SWF into a main movie, and then control its time line(nextframe and gotoandsop) with a button in the main movie (parent.)
i'm using this code to load the movie:
Code: Select allvar mcExt:MovieClip;
var ldr:Loader = new Loader();
ldr.contentLoaderInfo.addEventListener(Event.COMPLETE, swfLoaded);
ldr.load(new URLRequest("home.swf"));
[Code].....
I want to have an swf load an image file in an image container within the swf from the querystring. 1. In the query string I'd like the extension of the image file to not show:
2. In the swf I might have more then one place where the same howdy.jpg loads, but in different sizes. Which method would keep the aspect ratio of original and resize to fit varying container sizes?
3. I have some javascript parsing code with an swf example that I got from this page. [URL] But when I tried to alter the fla for my use it didn't work. I wasn't able to find 1 line of actionscript in the query.fla.
I cant load an image from a class.I have main.as which calls Classplayer.as Classplayer calls ClassMisiile.I cant load an image from ClassMissile .I can load the image in Classplayer and dont know why the image in ClassMissile doesnt appear and it is spelt right and in the correct directory.I dont get an error and the functions work but no image.
[code]...
I would like to be able to add the functionality of being able to load different galleries from a menu without loading a new mc with gallery inside it. I managed to botch the file up pretty good on my own, and was wondering if there is a ready answer nearby.So I'm thinking have but1, but2 and but3, with a seperate xml file for each. What would you recommend for a smooth way to swap the the xml files to the gallery, and load the first image of the new xml file? Also, can it be done with one big ol' xml file while keeping the galleries seperate? It's not necessary, but could be handy, and save some loading.It would also be interesting to apply the same principle to the resizing script that Scotty has in that big Resizing thread, just a thought.
View 2 RepliesSecond, I'm struggling a bit on xml and hoping for a hand. Your xml image gallery is a sweet piece of work, and I would like to be able to add the functionality of being able to load different galleries from a menu without loading a new mc with gallery inside it. I managed to botch the file up pretty good on my own, and was wondering if there is a ready answer nearby.So I'm thinking have but1, but2 and but3, with a seperate xml file for each. What would you recommend for a smooth way to swap the the xml files to the gallery, and load the first image of the new xml file? Also, can it be done with one big ol' xml file while keeping the galleries seperate? It's not necessary, but could be handy, and save some loading.
View 5 RepliesI am requesting an image via an ASP script: http:[url].....Shows up in browser but doesnt show up in flash when I use the moviecliploader to load it.I had a security error when I tried to load it earlier, but that warning doesnt show up anymore in the output window.
View 4 RepliesIs it possible to load an ActivX control into flash - that makes it possible to have 3D in flash?
Btw, how do I load an ActivX control into flash?
I want to add a slideshow to a web page. I have made a slide show with flash however I really want to add the play controls. Is this possible using CS4 Flash
View 10 RepliesI am working on a swf that calls a flv embed to play. I am calling a default image at the begining before the video starts. Does anyone know if it is possible to control the z index or level of this image in actionscript. My problem is when the image shows up it is showing up over my flash video controls and they are not visible. So after the movie is over it shows the image and the controls are there just hidden behind this image now.
View 4 RepliesI'm looking for a non-commercial solution / tutorial (AS3, MySQL, PHP, XML) that would point me in the right directon to control the quality of uploaded images.
View 1 RepliesI am trying to create a site with a 3D background image (which I converted to a MC). I created 2 buttons that, when rolled over should move the background image ('bgMC') to pan either right or left (depending on if the user rolls over the right button or left). I've attached the code I'm using below, if anyone has a better code or knows how to use btnRt or btnLeft to make bgMC pan to the X,Y coordinates in 'goLeft' and 'goRight'.
import fl.transitions.Tween;
import fl.transitions.easing.*;
import flash.geom.Point;
[code]...
I need to get the time in the flvcontrol to trigger a slide image. Where I can find the reference for that control or offer up any code?
View 1 RepliesI'm using this code to loop a background image over and over so it looks like an infinite rolling background.
Okay now I've decided I want to control the actual movement (left or right) just by my cursor. Some intertia would be good too.
Here's my code for the looping background
[AS]
onClipEvent (load) {
dummy_mc.duplicateMovieClip("dummy_mc2", 100);
dummy_mc2._x = dummy_mc._x+dummy_mc._width;
[Code]....
Zoom in on the snowboard and drag it around, it appears the low-res image is updated with hi-res patches on the fly. Is this a function tied to the bitmap object... or did they write some fancy code to pull in and assemble a sliced up image, and then replace the low-res slices on the fly. [URL].
View 1 RepliesIt's all about loading and unloading external swf's.My code is working perfectly though I just have some questions about load and unload issues.
------------------------------------------------------------
I have three buttons on the stage and it should load its external SWF
homeButton_btn - home.swf
page1Button_btn - page1.swf
page2Button_btn - page2.swf
Each of the button should load it's external SWF's intro when click.My problem is that I don't know how to command the button to play the swf's outro and then load the next swf everytime I click a button. Example: When I click homeButton_btn, the external swf should load "home.swf" and then if I am going to click page1Button_btn, the outro of "home.swf' should play and then once it reaches the end of it's timeline, it should load "page1.swf". Same goes with page2Button_btn, whatever swf that is on the stage should play it's outro first and then load "page2.swf"
My questions are: 1. How can I control the external SWF to play it's outro and then load the next SWF.
2. What code should I put at the end of the external SWF's timeline.
3. Where do you think I should put the preloader? Is it better to put it at the external swf timeline? or on my main swf timeline?
4. Does load and unload of external swf also work with movieclips? Like for example I will not use a external swfs, instead I will use movieclips to load and unload its content.My Actionscript 3.0 code
var pageContainer:Loader;
pageContainer = new Loader();
var nextMov:String;[code].........
I've reviewed all the documentation and Google results surrounding this and I think I have everything setup correctly. My problem is that the symbol is not appearing in my app. I have a MovieClip symbol that I've embedded to my Flex Component. I need to create a new Image control for each item from my dataProvider and assign this embedded symbol as the Image's source. I thought it was simple but apparently not.
Here's a stub of the code:
[Embed(source="../assets/assetLib.swf", symbol="StarMC")]
private var StarClass:Class;
protected function rebuildChildren():void {
iterator.seek( CursorBookmark.FIRST );
while ( !iterator.afterLast ) {
child = new Image();
var asset:MovieClipAsset = new StarClass() as MovieClipAsset;
(child as Image).source = asset;
}}
I know the child is being created because I can draw a shape and and that appears.
