I'm working on a number of pages that load external text files with buttons.That part works fine and I had the text marked up with basic html but would rather use css....I'm trying to figure out how to apply the css to the text:here is the css
Code:
@charset "UTF-8";
/* CSS Document */
[code].....
I'm having a problem adding numbers that are loaded to dynamic text boxes. I'm using AS 2 (Flash 8). The numbers are loaded to the textboxes from a text file using a loadVars command. The text boxes have instance names of TELEMATICS and BOOK - I have a third textbox called (instance name) RESULT - the text file is called TEST1.txt. My problem is that after trying (and trying) several solutions in tutorials I am unable to add the values in TELEMATICs and BOOK to get a (sum) total in RESULT. My code to load the numbers is as follows:
[Code]...
I have a slideshow that I want to play fullscreen, but there are a lot of photos, so I don't want to load them all in at the start. However, when I load them on demand, the slideshow will freeze for a moment while they load in the background.I know there must be something I can do differently so that these can load in the background, and just fire an event when they're ready.
View 8 RepliesHas anyone tried loading a pop-up window through externally loaded text files? As in, is it possible?
View 2 RepliesI am interested in designing a web-site with the primary purpose of displaying various poems and songs I've written over the years. The premise is simple: I need some actionscript which will detect the number and names of text files in a certain directory, and randomly pick one of them, then load it into a text field and format it with CSS. The user should simply have to reload their browser to get another randomly loaded poem. I've only taken one Flash class (very light on AS) and not at all knowledgeable on making 'universal AS' and usually hard-code everything. My apologies if something similar has been asked before..
View 14 RepliesI've managed to piece together a flash website with my limited as3 knowledge. The text is loaded from external text files and styled with an external css file.
It's working perfectly in Firefox and Explorer but it only works SOME of the time in Safari (on my mac).It's hit and miss. Sometimes it styles the text sometimes it doesn't.
[Code]...
I was messing around with some old examples, and I ran into an unfinished example where several 30k-100k XML files are loaded and stored as a string into an Array. The code looks basically like:[code]Basically, when I trace the 'this', the order of the files that are loaded is off. Out of about 10 tries, about 3 times the order is perfect. The remaining 7 times, the order is a bit off. Does anybody have a suggestion on how to ensure the files are loaded prior to the next file being loaded? I tried placing a while loop that basically delays the clock for a few milliseconds, and that didn't work either. Besides, that is not really a good solution to arbitrarily waste clock cycles.
View 6 RepliesWhat I'm trying to do is get the total bytes of all the files I want to load and display the percentage loaded of total bytes and bytes loaded of all the files. Its a slideshow so i want all the files loaded and then it will play. I've looked at bulk-loader but it wasn't what I needed. The image are loaded from an xml file. I think I would need to create an Array and then find out the total bytes but I don't know how to reference the loader in the progress.
[Code]....
I am still using flash MX. I'm pulling random text from a textfile (array.txt) into movieclip instance textbox.[code]All is good, but now my question is if I can have a text effect as well. For example having the random quotes typed out as they appear.
View 16 RepliesI've been following the techlabs tutorial on building an as3 slideshow as I'm just getting used to as3.I've been trying to load in .swf files instead of static jpegs, but it won't work.I'm assuming this part of the code is what won't allow the .swf files to be loaded from the xml file...end a hand and explain what this section is doing and if possible what to change to get it to load swf's as well as jpegs...?
code:
function clearLoader():void {
try {
[code]......
I want to mask everything off what's not on the stage. No problem for movieclips that I have put on a layer. But what do I do concerning an external swf-file? This swf-file is brought into my project via URLRequest and stage.addChild. It works well. But how can I manage to masking it?
View 6 RepliesI have the action script that loads external SWFs on a button click, but I don't know how to make it so that the slides switch after a few seconds on their own as well as on a button click. I know it has to do with a timer - but I have no idea how to do that (i'm super new to AS) Can someone please either tell me what code I need there or direct me to atutorialHere's the code I'm using so far:
var Xpos:Number = 0;var Ypos:Number = 0;var swf:MovieClip;var loader:Loader = new Loader();
var defaultSWF:URLRequest = new URLRequest("swfs/one_btn.swf");
[code]......
trying to create a universal fla file (shell.fla) in which I can load any swf file and control it from buttons in the shell itself. The buttons being play, pause, rewind, magnify etc.I�ve done all this in AS2 and now I have to do it in AS3. See my website [URL] E-Training - Motor to get a better idea of what I mean.The shell file has three buttons so far with instances called playMovie, stopMovie changeMovie and a dynamic text field - movieNumber. It is bound to the class Shell. The swf files to be loaded are numerical 1.swf, 2.swf, 3.swf etc. If I can get playMovie, stopMovie to work I can then do the rest.Here is my code so far for the class Shell.as:
package {
import flash.display.MovieClip;
import flash.events.MouseEvent;
import flash.events.Event;
[code]....
1. How can I kill, unload, removeChild the preceding swf file which has been loaded? When I load a swf file it creates a new loader.
2. On the onPlayClick and onStopClick buttons I get the following error message:
TypeError: Error #1009: Der Zugriff auf eine Eigenschaft oder eine Methode eines null-Objektverweises ist nicht m�glich.at Shell/onPlayClick()
If I run the site locally on a web server, it works fine. BUT, when I upload to my hosted server, it stops working.I have an SWF that loads another SWF, using a relative path and as I said, this works perfectly well until I upload it.Any ideas anyone.. has anyone had a similar problem. Am using Actionscript 3 and publishing to Flash Player 10. Just so you know
View 2 RepliesI have a flash file that loads jpeg files and runs through each on the timeline. I have nav buttons to go back and forth. Here is the problem, all images load on frame 5 and I do this while another image is displayed so that they are loading in the background. I do this so that my initial file size is small, but I can load images in the background making the flash file appear to load quickly and loading other elements after it starts.
So all images load on frame 5, then I go frame by frame until I hit frame 11. If I click one of my nav buttons to go back to say, frame 7, the jpeg is gone and is no longer loaded. How to load jpeg files into the library, or at least, keep them loaded after they have loaded once? I have attached my fla file for reference. I had to rename the extension to eps, but it's a fla file, just rename the extension.
Attachments: hm-slideshow2.eps (1.1 MB)
Iam loadingexternal .swf file into main.swf file.Iam dispatchEvent(new Event("loaded")) from external .swf.How to add Listener for "loaded" event?
View 8 RepliesI used Gaia framework to build a self-scrolling slideshow. There are only 4 pages in all, but I have realized to my dismay that each of these pages are requested over and over from the server. If you leave the page open and the animation goes by itself, that can clobber our server.
What can I do to prevent this? I wonder if there is a way of writing a URLRequest so the pragma header can tell the browser to use the swf from its cache rather than requesting it again?
Note that I am not using SWFaddress so the requests are going to the same URI.
I was trying to set up a loop which checks to see if all files are available from an array before loading them in. I have got it working to a point where it traces out file is loaded or not but I cant seem to trace out which actual file name is missing eg. myfile1.swf is missing.
[Code]...
I'm building a site that loads in various swfs for each section, which in turn load in videos, sounds, xml etc. Lets call these 'third level stuff'. Does anyone know how I can load the third level stuff into their swfs without having to put full paths in from the Main swf file? I hope that makes sense?! for example. A loaded swf pulls in a video from its own directory, so would look something like:
ActionScript Code:
request = 'videos/video1.flv'
I am trying to preload dynamic swf files from an asset folder into a blank movie clip within my main swf file. Some of the files are 2+ mb and need to preload.
I am dynamically importing the swf files from an external asset folder into a blank movHolder movie clip on the stage of my main movie. I have this working fine. I am having a hard time knowing where to place the preload script (in the asset swf or in the movHolder clip), and whether or not my script is accurate for this procedure.
Inside of the movieHolder clip, I placed the preload script script on frame 1:
totalBytes = Math.round(getBytesTotal() / 1024);
loadedBytes = Math.round(getBytesLoaded() / 1024);
percentDone = Math.round ((loadedBytes / tatalBytes) * 100);
framesloaded >=100) {
gotoAndPlay("start");
}
On frame 15 I have a looping action that tells flash to gotoAndPlay(5); as it loads the asset to frame 100.
On frame 20 I have inserted the label "start".
Obviously my approach is flawed and does not control the dynamically loaded asset. I am assuming that the asset swf if loading on frame 1 and ignoring my code.
How to load multiple XML files and know when all loaded
I load several XML files at the start of my AS code. Using addEventlistener/Event.Complete for each URLloader I call upon functions to get data from the respective XML files.
Like this:
// Loads themes from XML file themes.xml
themeLoader.addEventListener(Event.COMPLETE, getThemes);
themeLoader.load(new URLRequest("themes.xml"));
[Code]....
In those functions I call other functions to start my application.
The problem is that if some XML file (like cats.xml above) has not been loaded before I call MainShow(), I get errors since MainShow() also uses data from the cats.xml. Thus I would need to somehow wait for all my XML files to be loaded before I start up my application.
How can I do this in a convenient way?
I'm going to load some external files in to my main fla-file. I want the code in my main fla to be executed when all files are properly loaded.
#include "MyFile.as"
I had this:
Code:
var loader:URLLoader = new URLLoader();
loader.addEventListener(Event.COMPLETE, loadCompleted);
loader.load(new URLRequest("MyFile.xml"));
[code]....
but now I want to include an as-file aswell so both has to be loaded before loadCompleted triggers.
I'm a flash noob and I'm having trouble randomizing few dynamically loaded swf files.
1. I have a UILoader on the stage with an instance name of bg_ldr. It is working properly.
2. I have (attempted) to set up a function called getRandomNumber (see code below) and I believe it is correct.
3. BUT... specifically I don't know what I should put in this part of the code: bg_ldr.source = bgArray[?????]; and I think this area is the problem. I thought I could just call my function, like this:bg_ldr.source = bgArray[getRandomNumber];But it's not working.[code]
I have created a flash movie which loads a XML file. This XML file contains around 8 links.
Now I am trying to load another XML files corresponding to each link. That is, if clicked on Link1, flash movie should load XML File 1, Link2 should load XML File 2 and so on.
I am trying to preload dynamic swf files from an asset folder into a blank movie clip within my main swf file. Some of the files are 2+ mb and need to preload. Let me tell you what I have done so far, and hopefully someone can put me on the right path.
I am dynamically importing the swf files from an external asset folder into a blank movHolder movie clip on the stage of my main movie. I have this working fine. I am having a hard time knowing where to place the preload script (in the asset swf or in the movHolder clip), and whether or not my script is accurate for this procedure. Inside of the movieHolder clip, I placed the preload script script on frame 1:
[Code]...
I'm having trouble with my text and xml files seeming to be cached. They are altered by a php script called from flash, and this overwrites the text files correctly, but when they are reloaded into flash (eg. when the page is refreshed) the old data is still being used.I was reading this article and was interested in this line:
Code:
input_xml.load(xml_file + "?uniq=" + new Date().getTime());
could someone please explain why this would work, and whether this would prevent the problem that I'm having. I'm presuming that this unique number is never used in any way, it just forces the new file to be loaded, but I'm just a bit unsure why.
I use .txt files a lot with flash to load external news and updates. Although you can use the loadVariablesNum() command to load the .txt files is there anyway to edit and save the external files in flash? e.g. say I have a text box and a submit button in flash is there some way where I can add the text boxes content to a .txt file?
View 1 RepliesI am using a dynamic text field to show html formatted text from .txt files. I have set the html property both in the properties panel and in AS, and it mostly works. All html formatting show up just fine, except for when "&" is used. Flash CS3 documentation indicates that & is supported, so.? All text after the & does not appear: the only text loaded is that that comes before it. I am using CS3, AS2, publishing in Flash Player 9. Sorry if this problem has been addressed elsewhere, but I've had no luck with my searches.
[Code]...
I'm building a site and I would like to add a scrollbar to a text area that swaps out xml text files. Currently, I have up and down arrows to scroll the text, but I would like to have an actual scrollbar instead since there is a lot of text in some of the sections. Here is a link to the current version of the site with the up and down arrows: [URL]
I can make the scrollbar work just fine if I put the text in the first frame, but whenever I set it up to call on text files, then the scroll bar won't work. Obviously, I'm pretty new at Flash. I've attached an FLA with the text box.
What is the best approach to add and remove sections if I'm using this method for example.
var myLoader:Loader = new Loader();
addChild(myLoader);
var url:URLRequest = new URLRequest("section1.swf"); [code]......
Do I add this to button click events? for every section? and a remove method for the other sections that are not in use? or is there a better way to setup this more reusable and checking correctly if a swf is loaded or not?