my stage is set at 500x400 in flash cs4. I created a rectangle for the background and set the same size as my stage that covers the whole stage but I noticed when I hit ctrl+enter to test the movie clip, it initially looks fine but when I expand the window large, you can see white area all around.
View 3 RepliesThis goes out to Scotty or any other guru floating around out here. I need the image_mc movieclip in this .fla to scale to fit browser, however i need the image to scale in proportion. I would also need a listener of sorts that will NOT allow the image_mc movieclip to scale below the stage size of 1024 x 768.
[URL]
I have created an animation (see attached) where the stage can be dragged from left to right to reveal hidden areas off the edge of the stage. Unfortunately I need to add buttons containing links to websites within the dragable movie symbol and I can't work out how to do it.
View 2 RepliesI'm doing a website for me, with flash... I want that the site is "full browser screen" but, I need that only the background is stretched for the size of the browser window, all the other elements (like nav bar, logo etc) will be in the same position, and MUST NOT be stretchet like the background...
How can I lock the position and dimension of the element of the website, but let the background stretch?
I'm creating a navigation bar for a website, and the client wants a little car to roll back and forth as you mouse over the buttons. Ok, that's easy enough, I say to myself, but I've run into a hitch.
When the page loads, (before you mouse over anything) the little car is sitting half off the stage, that is, only half the car is visible. I fixed that by putting the car symbol's registration point along the left side, but then the car's left edge is whats following the mouse. I need the cars center to be whats following the mouse, but at the same time, not be able to slide off the screen.[code]...
I'm trying to do a simple game which you have to move a frog character in an X axis , and you have to "caught" the falling insects (as much as you can). The game lasts until you fail 5 ,and then it's game over with a display that says how much insects you caught. However, i'm doing this as a mid-term exam for a course in college.. but really, because of some problems, most of the us,the students.. learnt almost nothing, or hardly the necessary for being able to understand the code, but not to script by ourselves
The game works propertly, except when the frog reaches the edges of the stage, which is 800x600 px , and goes beyond it This is the code: (I'll skip the 2 other AS frames which make the game start and end and post the one with the in-game code)
[Code]....
I am a newb to Flash CS5 Pro, so I can't tell what is wrong. I have multiple objects on my stage that I copied to create afull effect. Most of the objects perform perfectly, but the ones on the edge of the stagedisappear when I export to video. When I zoom in to look at them, they are there,but when i zoom out to fit to page, they are gone
View 2 RepliesI just finished some code to get enemies in my game but im experiencing strange behaviour within the game.My game currently is a 2000x2000 map which can be scrolled by moving the mouse to the edge of stage... i just tried adding some enemies.
Whats happening here is that the red bordered enemies stick to a position on the screen. The green bordered enemy scrolls with the map.In my code im trying to spawn 10 enemies, and have them update their positions according to map scrolling.
heres my code
[code]...
I have an mc which moves on pressing buttons. I want it to come to the left of the stage if it hits the right end. Simple, isn't it? But I want to have one move thing done. I want only that part of the mc to come to the left which has hit the boundary. For example, Let this be the mc-
[Code]....
I have an fla that has a scroll which is large, 4591.60 is there a limit where flash will scroll and then stop? I did not create the file but I cannot get the scroll to go past where it is now as there is more to the scroll.
View 1 Repliesi have an apple and the character the character can walk over and touch the apple when he touches it he gets 30 random health but then if he health is already 100 the apple will give him 130. ??? is their any way to make it so his health doesnt go past 100
heres the code on the apple
PHP Code:
onClipEvent (enterFrame) {
}
if (this.hitTest(_root.char)) {
[code].......
I have used wsdl2js to generate the javascript needed to communicate with the service.However I end up getting a http 500 error and have not been able to get past that. I have looked through the provided examples from the Apache CXF download and I have done some searching and cannot find a solid example of creating the javascript client. A lot of examples seem to somehow access the wsdl file at runtime from a server but my javascript is already generated from the CXF tool and I just include the scripts.
Adobe Flex and AS3Another option I have considered is using Adobe Flex. I create a new Mobile Flex project in Flash Builder using the BlackBerry PlayBook SDK and Flex 4.5. However when I use the menu options to connect to a web service I get prompted with "This option is only available for flex projects."Are there any other options out there that provide a solution to this problem? If you need more information just let me know
i have a movie clip symbol (its just a red square 1x1).
at frame 1 it is just in the centre at 1px x 1 px.
i go to frame 60 ( the end of the movie clip ) and i want 2 resize it quite a bit.
but it WILL NOT let me resize past 28.8 for widht and height.
p.s. if i remove the tween then i can resize it to my hearts content.
I've got a couple of questions regarding the same project.
1- When you view URL... in IE, you'll notice that it sometimes doesn't go past the preloader. I asked why this happened in an IRC channel, and was told to use swfobject. However, with swfobject, I have the same problem. Is something else the problem?
2- I have the code [code]
I've got a number of days from the date to today. Like 1689 days. How can I get from this the date subtraction past days with date?
View 1 RepliesI am having a little trouble understanding why my code is not functioning. It works if I subtract and combine numbers above .1 but if I use a number below .1 the _x and _y values stop at 0. I would like the _x and _y values to go into the negative. I am using Flash MX.
function movePastCorner(mc){
mc._x = 2;
mc._y = 2;
[code]......
I have a scroller mc that I want to control by clicking underneath its y position to advance it down its y axis by a predetermined amount.The below code works to move it, but it advances past its max value of 496.5 (off the screen).Have I made a mistake in the code below? The scroller mc and associated text block is in their own mc on the root timeline. This code is on a frame on the root timeline.Has it got to do with the relative y positions of the stage compared with the y positions in the actual MC that I am trying to control?
Code:
principals_mc.johnTxt_mc.scrollerZone_mc.onRelease = function () {
var scrollerAmount:Number = 80;
if (this.hitTest(principals_mc.johnTxt_mc.jfscroller_mc)) {[code]......
in the first frame, first scene. Shouldn't that be where I but the include? (the buttons do work in scene) The buttons that are defined in external.as work in the first scene, but not in the other scenes. When I do an "include" in every scene, I get errors, no buttons work (makes sense....that should throw errors).
[Code]..
gotoAndPlay() is the only actionscript I have in my flash and all I want it to do is go to a frame. If I tell it to go to a frame past a certain one it will not. It always (unless I pick a frame previous to the messed up one) goes to that frame. I have only one scene.
View 10 Repliesi want to past an URL to a getURL without actually opening a window, this url is a like a tracking tag...
View 1 Repliesi made a small game. the player needs to press as past as he can on the mouse before time runsout.
well, i want to send the score of the player by post (php)
i have read alot of guids but i didn't mannaged to do thise, so i came here.
[Code]...
I've created a multi-framed flash file that's calling multiple variables from an external php (text) file. I'm using an onload command to do this and for some reason the variables seem to "disappear" once I leave the first frame (where the onload and load commands are)I'm figuring that my problem has to do with 'variables scope'. I've read the article on this site but I don't know actionscript well enough to proceed.I ultimately want to do away with using multiple frames by using multidemsional arrays and for...next loops, but this is what I have to work with (for now). I'm going crazy trying to get THIS to work.
[AS]
// ##################################
// FRAME 1
[code]......
I'm currently working on a project where I have a mouse trailer in my flash header. It drives me crazy when the effect cuts off when your mouse goes out side of the flash area.
Does anyone know any tricks that I can use so that the effect doesn't cut off? I need to keep it in ActionScript 2.
Assuming, for a rectangle that is controlled by the user using the arrow keys, that I do the following[code]...
Assuming that works in detecting the collision, what would I use to actually stop the rectangle from progressing through the wall?
I am using a quiz template and have placed video in the first frame. Now the quiz doesn't go past the welcome page when I test movie... I'm sure what I am missing is simple!
View 1 RepliesBeen trying to clear browser cache for the past hour, tried almost everything on google and also went Tools>Net options and cleared it. Yet everytime I load the website it shows the old version.
View 1 RepliesI am looking for a way to have my content scroll vertically automatically if it is past a certain height.
Code:
var my_format1:TextFormat = new TextFormat();
my_format1.font = "EventFont";
my_format1.size = 50;
my_format1.color = 0xFFFFFF;
[Code]....
I have a MC that can be dragged. when it goes past a certain point it is scaled down in size and it locks in to a specified x and y position. The problem is this is causing the onPress function and onRelease function to not work properly. once the mc goes in i cant get it out. this is on the first frame of the timeline
Code:
flatline.onPress = function() {
if (_currentframe == 1) {
[code]....
[Code]...
if i wanted to add a little bounce effect that when scrolled it went a hair past the destination but came back how would that look?
I am trying to create a menu in Flash to access different Flash interactives I have created.When a button is clicked it brings up a different Flash project, but I am having problems with it now bring up it's own assets because they are all referenced as if we were in the sub-folder of the current swf.
View 2 Replies