I am a newb to Flash CS5 Pro, so I can't tell what is wrong. I have multiple objects on my stage that I copied to create afull effect. Most of the objects perform perfectly, but the ones on the edge of the stagedisappear when I export to video. When I zoom in to look at them, they are there,but when i zoom out to fit to page, they are gone
View 2 Replieslets say I have animated a car entering the stage area from outside the stage. When I render the SWF at first only the content on the onstage area is visible but if I resize/enlarge the window I can also see the car(content) lying outside the stage just like in the flash file. How can I make sure that no off stage content is visible at all in the final SWF?
View 4 RepliesWe are making a simple Flash game intended for mobile phones via Flash 5.5 using ActionScript 3.0.We are animating an array of objects vertically until they hit another object at the top of the stage.We instantiate each element of the array with one of 10 MovieClip animations.Each object has two event listeners; one to animate vertically and another to listen for a mouse click(which removes the object from the stage).We run into an issue when more than 10 objects are on the stage at one time.The issue is that the objects disappear sporadically and without explanation. We assume the problem is due to some type of memory/ garbage collection issue.Below is a snippit of our code that dispatches the MovieClip instances onto the stage.[code]What can we do in order for the MovieClips to not disappear?
View 2 RepliesI'm attempting to learn flash using Adobe CS4. I've found some really good tutorials, but I can't use them because every time I draw something on the stage, the resultant drawing disappears immediately after I release the mouse. Since I can't see it, I can't select and manipulate it. I captured the behavior and stuck it on youtube. I don't have a mike on this system so there's no sound. [URL]. If I create the file with ActionScript 2.0 instead of 3.0, I get outlines of the objects, but not the objects themselves. That's not on the vid, but I'd rather use 3.0 anyway.
View 3 RepliesI'm tweaking the video code found here [URL] His progress bar starts at the edge of the stage. My progress bar starts at x=40 into the stage. My problem is that even though all my mcs related to the progress bar are positioned properly the scrubber mc hops to the edge of the screen when the video starts. It also acts as if the progress bar you scrub though is at the edge of the screen too. I can't figure out why it's doing this. There's nothing in the code to tell it to do as such.
[Code]...
I have created an animation (see attached) where the stage can be dragged from left to right to reveal hidden areas off the edge of the stage. Unfortunately I need to add buttons containing links to websites within the dragable movie symbol and I can't work out how to do it.
View 2 Repliescurrently i am removing objects when they reach the edge of the screen with
[Code].....
i understand this does not delete the object? without removing event listeners before removing the object the error log fills up, i believe its due to the stage isnt there after its removed. this makes me think that removechild does not delete the object? i will be creating and deleting many objects during runtime, and i dont want to slow down or use too much memory, how to properly free up the object
I am using Flash CS4 and need to resize my Flash stage and all objects therein.
To do that I activated onion skin tool, selected all objects and all frames and resized by using the transform tool.
However, masks and some motion paths are not scaled proportionally.Is it yet another bug in CS4? Here is a video illustrating the [URL]...
I increased the size of my stage to 1280 x 1024 and now objects on the periphery have disappeared. When I zoom in they appear, but when I zoom out or export the movie the objects in the center are there but the objects around the edge do not appear. If I add an object and drag it to the edge I can watch it disappear as I am dragging it, but when I zoom in it is there. I have no masks and I need to create the video at the higher resolution, so I cannot resize the stage smaller.
View 3 RepliesI'm creating a navigation bar for a website, and the client wants a little car to roll back and forth as you mouse over the buttons. Ok, that's easy enough, I say to myself, but I've run into a hitch.
When the page loads, (before you mouse over anything) the little car is sitting half off the stage, that is, only half the car is visible. I fixed that by putting the car symbol's registration point along the left side, but then the car's left edge is whats following the mouse. I need the cars center to be whats following the mouse, but at the same time, not be able to slide off the screen.[code]...
my stage is set at 500x400 in flash cs4. I created a rectangle for the background and set the same size as my stage that covers the whole stage but I noticed when I hit ctrl+enter to test the movie clip, it initially looks fine but when I expand the window large, you can see white area all around.
View 3 RepliesI'm trying to do a simple game which you have to move a frog character in an X axis , and you have to "caught" the falling insects (as much as you can). The game lasts until you fail 5 ,and then it's game over with a display that says how much insects you caught. However, i'm doing this as a mid-term exam for a course in college.. but really, because of some problems, most of the us,the students.. learnt almost nothing, or hardly the necessary for being able to understand the code, but not to script by ourselves
The game works propertly, except when the frog reaches the edges of the stage, which is 800x600 px , and goes beyond it This is the code: (I'll skip the 2 other AS frames which make the game start and end and post the one with the in-game code)
[Code]....
Not sure the best way to do this. I have a class we will call DropActivity, here is the code
[Code]...
when the stopDraggingMe() method is called from another object (code shown below) I need to see all the objects on the stage to see what objects on the stage my currently selected movie clip is over and assign it to the dropCheck.checkAgainst method (that will be checked against an array to see if it can in fact be dropped, if so set the canBeDropped value to true and therefor run the .stopDrag() ). I have read using root is not a good coding practice in AS 3.
[Code]...
I just finished some code to get enemies in my game but im experiencing strange behaviour within the game.My game currently is a 2000x2000 map which can be scrolled by moving the mouse to the edge of stage... i just tried adding some enemies.
Whats happening here is that the red bordered enemies stick to a position on the screen. The green bordered enemy scrolls with the map.In my code im trying to spawn 10 enemies, and have them update their positions according to map scrolling.
heres my code
[code]...
I have an mc which moves on pressing buttons. I want it to come to the left of the stage if it hits the right end. Simple, isn't it? But I want to have one move thing done. I want only that part of the mc to come to the left which has hit the boundary. For example, Let this be the mc-
[Code]....
I am trying to get certain objects in my movie disappear or be removed from view when you enter full screen.
View 1 RepliesI need to create an object in code which can then be imported to the stage. Specifically it's a circle with an ellipse cut out of it. The size and position of the ellipse masked out need to be parameterized by sliders, and the size of the circle as a whole is also a parameter which might be dragged out on the stage.
Does anyone have an example of how to programatically create an object in action script which can be imported to the library which can take parameters (or rather expose some methods) which can be wired to other things in the project like a knob or slider?
I want to find out how to find objects on stage in order to change their names, using actionscript in run commands.
View 2 RepliesIm currently try to construct a flash presentation that will have several different buttons on the same stage, and each button when clicked will make particular objects appear on the stage. Then once each button is clicked again it will make the particular objects connected to it disappear from the stage. Each button and the objects it makes appear / disappear is seperate from all the other buttons actions.
construct the actionscript for this presentation as im finding it quite complicated to have several things going off on the same stage at the same time. Im currently working in Flash CS4 actionscript3.
The closest example i have seen to the program i would like to create can be found using the following link...[URL] However my program would be simpler, e.g. clicking the bun in the program just simply adds the bun to the screen, it doesnt scroll through different types of bun.
I have a 'room' movieclip with 4 frames each representing a different view (N,S,W,E). I have a different shape object in each frame. The shape objects all subclass a generic shape class and consequently disappear onClick. The problem is that they reappear when the frame is revisited. I've used event.target.visible = false in the generic shape class. I'm wondering if there is a way to 'permanently' remove them through the generic shape/parent class? I'm trying to avoid a rank of if functions and use a catch-all if possible.
View 6 RepliesI've created a jQuery plug-in that allows a selected panel of a web page to be pinned to the top of the browser view-port when the user scrolls a long page after passing a particular horizontal point on the page.When the panel is pinned or unpinned, a strange thing occurs: if a Flash SWF object is present as a descendant element of the container, the Flash object either restarts its animation or disappears completely.The pin or unpin change occurs when the CSS property "position" switches between fixed, absolute and static. This forces Firefox to redraw its elements and it causes the <object> to reload and reanimate the Flash movie. I read this post with interest:URL...
Does anyone know of a workaround that prevents the <object> tag from reloading? I admit the Flash is an ad, but this problem only occurs in Firefox. Although there are suggestions that this may be a bug, I have searched without success and I'm scratching my pate with a deadline fast approaching.
Is it possible to have a stationary video (ex: of spokesperson) move across the stage, in a manner that would appear to have a "panning camera" effect? I've attempted to produce this effect by simply importing the video as an imbedded video, then dropping a new layer into the timeline, and then simply placing a new keyframe where I'd like the video to begin a panning camera effect, but it starts the video over again where I've place the new keyframe. Is it even possible to acheive this sort of effect through Flash or can I only do this in AE or Premiere?
View 5 RepliesI'm having a very basic problem, im trying to do a slow zoom/scale of an image (jpg), in this case its a company logo. the problem im having, as you'll see is that this causes edge effects, they are shakey/aliased.almost looks like some sort of antialiasing is required.
View 3 RepliesWhat im seeing is an odd white outlining around the edge of my sprite:Its really odd, the outline only becomes visible after applying my ColorMatrixFilter. There is no outline on the asset itself.[code] I have uploaded a small sample project here: URL...
View 3 RepliesI've used a standard skin on an FLVplayback component which loads and plays perfectly. The problem arises when I enter fullscreen mode and then leave it again. Once I've done this, the video remains on the stage irrespective of what frame I'm on. I can even change scenes and the video remains in the middle. I haven't even added the video using actionscript so I don't really understand how it could possibly stay on more than the frame its inserted in!? At the moment I've used no ActionScript to control the video. I apologise if I'm missing something, this is the first time I've dealt with videos.
View 8 RepliesI am creating a miner game (where there are pieces of gold and you have to catch them with hook).I modified the Main class to take all children of MovieClip(root) that has name "Gold" and them put them in an Array(boulders[]) where later check collision (I design and put on stage several "Gold" MovieClips for every level). When the player collects all gold (when the boulders array.length <= 0) then goToAndStop(nextLevel), where again it takes the gold MovieClips from the stage and if it's name is == "Gold" then put's it in the boulder[].
What happened: On the first level(frame 2 cause frame 1 is the preloader) everything is good - I have 2 gold MovieClips on the stage(in design mode) and all 2 gold are put in the array and displayed.
On the second level I have 4 gold and only 2 of them are put in the array and displayed.
On the third level I have 7 golds designed on stage, but only 3 are displayed and put in the boulder array.
It's almost the previous count of the gold(on the previous frame) are subtracted from the count of the next frame gold movieclips.I am placing the Main.as code:
public function createLevel(){
nextLevel = this.currentFrame + 1;
for (var i:uint = 0; i < MovieClip(root).numChildren; i++){[code]....
I've been going mad trying to find a code that will make my custom cursor invisible when the mouse isn't on the swf.
View 2 RepliesIn Flash CS 5.5, I know you can preview the playback of a video right on the stage using the button and fader of the skin. But then why is there still the [preview] section written in the Component Parameter? (Under the isLive line) And why is it always set to None?
View 1 RepliesI made a movie in Flash CS3. The exported SWF shows that the right hand side of some of my letterforms (made from a non-converted font) are clipped off. Switching fonts produces similar results. Is there some glitch in the program that I am no aware of?
View 9 Repliesthe conent will not be able to be seen unless the user hits the arrow keys on there key board. So i need to make a group of objects i can make into a movie clip and than inside that movie clip make an animation that plays the squirrel running. i will pause here to ask two things i dont know how to do i want the squirrel to have an animation when standing still where it flicks its tail (like a real squirrel would). and also how would i flip the squirrel so when the left key is pressed it points left and when the right arrow is pressed it faces left? and my main question when it reaches the edge of the stage the extended background that runs off stage moves over to reavel more content. as well as not have the squirrel run off stage? in short i am using the squirrel to view the full pages content.
View 2 Replies