I have used the flash accessibility tab to add index numbers to 19 elements on my page.However, once I reach tab number 19 I cant get it to loop back to tab index number 1.
View 4 RepliesHow do you make a loop go back and start at 0 again?
var mySWF:Array;
var currentSWF:Number = 0;
var myXML:XML = new XML();
myXML.ignoreWhite = true;
myXML.load("myXML.xml");
[Code] .....
I am putting together a small slideshow of pictures and it's only about 350 frames. I haven't worked with Flash since version 4.0, so I'm still trying to figure out Adobe's setup. 4.0's setup was so easy when it came to replaying a video once it hit the last keyframe, but I'm so lost in this ActionScript stuff.
How do I get the video to loop back and start playing again automatically?
I'm trying to animate some leaves that rotate back and forth to simulate leaves blowing in the wind. I got to animate the leaves one way, but i couldn't figure out how to make it loop (go back and forth).Here's the code: on the movie clip named "leaf" witht the following code attached to it:
onClipEvent (load) {
_root.leaf._rotation += -15
}[code].....
I have an index page with several buttons on. When the buttons are clicked, it takes the user to a different point in the timeline and loads the appropriate swf in the UILOader I have on stage.Everything was working fine, but it has suddenly decided to stop working. Now if you click a button on the index page, it loads the relevant swf just fine, but when you go back to the index page and click a different button, the UILoader will not show the corresponding swf and just appear blank, although I know its there as I can hear the sound of the swf playing! I'm not sure if its simply something blocking the swf, but I don't even know what it is! I'm using addChild to add little panels to the screen when a button is pressed, but they are hardly big enough to cover the whole of the UILoader!
View 1 RepliesI have a project (see attached) where I need to have the folders seem like they are floating in space, and I need the best way to make it so when you click on a back folder, it slides off the screen and come back in front of all the folders.
View 2 Repliesi want to know how we can make back button in flash to go back to page same like browser back button.
View 1 RepliesI have a grid of letters. I want to create the else aspect, where if you don't drop the letter on any square, it'll return to its original position. Issue is I don't declare it's original position, i simply use placement on stage.
View 1 RepliesConsider an array with x number of elements (of type Object) where some of the elements might be undefined.I use a for-each loop to access all the elements of the array that is not undefined (since it simply skips the undefined elements).But I also want the index of that particular element.The only option I can see is to use indexOf(). But it feels a bit like looking for water on the other side of the river so to speak.
When looping through long arrays each frame, is there a change indexOf() might slow it down? or does the for-each loop somehow know what index it's dealing with?
Consider an array with x number of elements (of type Object) where some of the elements might be undefined. I'd like to use a for-each loop to access all the elements of the array that is not undefined (since it simply skips the undefined elements). But, I also want the index of that particular element.
So I have two options:
1) Use array.indexOf(element).
2) Use traditional for loop, thus getting the index out of the iterator.
I'd rather not use option 2 since it contradicts the whole idea of not having to deal with undefined elements.
I have an instance of the flvPlayBack component on my stage called myVideo a list of links down the lhs is used to pop in the required video.If a user gets say 1/3 of the way into a video and the presses a different link for a different video then: the new video pops up but the seek bar is still some way into the new video there is a pause of around 1 sec the seek bar goes back to the start.I want to speed up the return of the seek bar to the start of the new video.
Here's some code:
Code:
function clickHandler(event:MouseEvent):void {
this.myVideo.alpha=1;
if (linkType !="http"){
[code]....
This might be wrong but do I need to somehow remove the reference to the "old" video before I set the source to the new one?If that's junk - and it probably is ...How can I speed the return of the seek bar to the start of the new video?
how can i drag parts of a pazzle and drop them in the rihgt position? if the posision is wrong i want (the piece) to return back to its start posission.
View 1 RepliesI have tried this:
PHP:
<?PHP
$link = mysql_connect("localhost","root","");
mysql_select_db("dbname");
$query = "SELECT * FROM dress where dress_type='shirts' AND sex='male'";
$results = mysql_query($query);
[Code]...
how to have control over the strings in the for each loop?
I search the stage for the level I created and put the floor pieces into an array. I'm trying to test the properties I created for each piece by tracing to output when the hero sprite is within the floor pieces sides. This works fine when I specify the array index to do this for, but does not work when I try to loop through every element of the array. I see no reason why this code should not work.
package {
import flash.display.*;
import flash.events.*;
import flash.utils.getTimer;
import flash.utils.Timer;
public class MegaManTest extends MovieClip {
private var hero:Object;
[Code] .....
I often need to set the alpha of all but one of a list of objects.
Code:
beastie1.alpha = 0;
beastie2.alpha = 1;
[code].....
iam using FLVPlay back control in my project, i need to mute it while running first time automatically. it may thr script or any other option? i got struct up. mute buttton has to be ther, but initially it has to be muter, and video has to play.
View 1 RepliesI am making a website and am having a very hard time with the actionscripting and external loading involved. I have managed to auto load the background externally but the problem is that once the bgload movie(which is loading externally in main.swf) is loaded, it goes back to start. make the "bgload" movie stop right there after its played once....
View 10 RepliesUpon the stage of my flash movie, I have several symbols (movie clips) which I need to address dynamically using a loop. The symbols that I want to address all have instance names beginning with the string "lamp_", they then each have a different number concatenated on the end to distinguish between them (e.g. lamp_1, lamp_2, lamp_3.....).
The following noobish effort I have devised is totally useless, and I am hoping someone can show me how I might get this working[code]...
I have a toggle to mute and unmute sound in this movie. If sound is on and refresh with SharedObject sound plays again. Also I can toggle between the sound before refresh. The issue: when selecting mute then refresh, the movie plays back muted but the ability to un-mute is no longer available (at least not before another refresh).
Problem: toggle to mute then refresh of browser. Mute is fine but no ability to toggle back to sound.
Code:
var my_snd_obj:Sound = new Sound();
my_snd_obj.start(0,1);
my_snd_obj.attachSound("my_audio");
[Code]....
I've used kirupa's 'Photo Gallery Using XML and Flash' tutorial & modified to make my gallery, you can view it here: ZedMedia.org by clicking on the photos section in the main page. what i want to do is, instead of reaching the end of all my photos and it stopping, i want it to go back to the beginning image & start all over again. i want the opposite to appen at the start. when the previous_btn is pressed i want it to go to the end of the gallery.
View 3 RepliesI have used a method to shuffle a part of a Array, but i noticed that it does not work very well.When i run this method I sometimes get empty array values.So if you would try the example below and test it out some times you would get a right result but sometimes a wrong result.For example when i run this i get in my trace output:
a,b,c,d,g,,e,f (here after the g it goes wrong)
a,b,c,f,g,d,e (here it goes right)
a,b,c,d,,g,f,e (here it goes wrong)[code]...
I'm rewinding an FLVPlayer w/AS, but the little triangle on the seekbar doesn't move back to the start. The code I'm using is: videoComponent.stop(); videoComponent.seek(0); videoComponent.playheadTime = 0;
View 1 RepliesI have a for loop, and I want it to start over if a certain thing happens. Completely start over, not continue(). Is there any command I can use to do this?
View 2 RepliesI've got a game going where portals are randomly placed across the map every X seconds.However, I can't figure out how to stop the portals from spawning on top of each other. I know how to easily do the collision, and check if they're too close to each other.Pretty much what I do is create the portal object, then randomly assign it X and Y values. Then, I do a for loop that loops through all the portals in the portals array, check THEIR X and Y value, checks to see if they're too close...then what? I can't just go "okay, it's too close" and randomly assign it new X and Y values, otherwise it could be on top of ANOTHER portal.What I'm looking for is something that will check the X and Y values of all the portals, then if it is on top of another portal, it will assign new X/Y values. Then, if these are on top, it will do it again. And again, until it gets the job done!
View 2 RepliesI'm pulling an xml and using a for loop to create a thumb list. This list is going to be quite long but I only 25 thumbs to be loaded at a time, so that the next 25 is only loaded when a user hits a button. I know how to set up a for loop in a function, but I can't quite figure out how to break up a loop where it would stop and start. I was thinking I would call the function each time a button is pressed and the loop would pick up where it left off with the next 25.
I thought maybe I could substite other variables into the for(); but everything I've tried breaks it. I tried pulling the var i:int = 0; out of the for so the function could set the i, but I guess I'm not clear on exactly how the for loop works.
What I'm doing:
function loadarticleHeadlines():void
{
for (var i:int = 0; i < egarticleXml.articlelist.articleitem.length(); i++)
{
[Code].....
I am using the TweenLite engine and i was wondering how to loop/ start over the animation??
View 3 RepliesWe are developing a video chatting application on flex, it works well on Desktop systems and while running on a laptop the sound is loop backed and becomming a large noise, Please help me to fix the problem.
View 1 RepliesI have a for loop that attaches a new mc to the stage fills it with info from a database. I should be left with three mc's but not the case. only the last one shows up on the stage. I went thru it with the debugger and it is filling all those movieClips with data but, overwrites them when it goes back to the top of the for loop.
[Code]....
can someone open up this .fla and tell my why they think it isnt working.. theres the wierd little chain thing doesnt start from the right spot and i dunno how to fix that
View 3 RepliesI'm trying to make my movie loop, but when I enter the following code in the last movie clip (layer) of my swf movie, it only loops back to the first frame of that movie clip (layer).
gotoAnd Play (1);
When I do the code above it doesn't loop back to the beginning of my movie.
What is the proper code for making it loop to the very beginning?
I tried to do the following code, but I got an error message. I'm not sure of the proper syntax for the code.
tli_logo.gotoAndPlay(1);
tli_logo is the name of the very first movie clip (layer) of the swf movie.
I believe that making the last frame of the last movie clip (layer) loop back to the first frame of the first movie clip (layer) will be what I am trying to achieve. Is this the proper way to go about this, or there a better and more proper way to do this. If there is, then please send me the proper syntax AS cs3 code to do it.