basically i put it on the timeline inside of a movie clip and when you rollover it it plays the animation, and when you rollout it rewinds and goes back to the first frame, i use it for rollover buttons, ive been trying to figure it out but no luck
View 7 RepliesI am trying to activate a rollOver-function when the mouse rolls over a movieclip inside of a movieclip.On the main window (root), first you rollOver a button where a window shows up with more options (movieclips).From stage, my first movieclip is called "catapultas_read_more" which leads to amother movieclip called "pic1_mc". The label that is going to play when mouse over on pic1_mc is "rollOn".I tried this.gotoAndPlay("rollOn); directly inserted to the movieclip, but the movieclip inside pic1_mc never starts
View 8 RepliesI am trying to figure out how to make a bottom bar similar to the one seen ontions inside the bar- here's what I've got so far:as you can see I have a date/time MC inside the bar_mc which is working fine but whenever I try to have a new rollover/rollout movieclip (or button) inside the bar_mc it won't work/won't show rollover animation.
View 1 RepliesUsing a movieclip rollover to change another movieclip timeline?
View 1 Replieshow i might use a movieclip as a rollover in Flash to display another movieclip?
Simple as...
If i could be re-directed either, that'd do...
I'm trying to pause my rotation on rollover of a movieclip and restart rotation on rollout of the movieclip. Here is my current code,
[Code]...
how to pause a movieclip on rollover and start again on rollout?I need it so when it returns to playing on rollout it continues from where it paused.I would guess it's pretty straightforward but my as3 knowledge is v low...
View 2 RepliesThe following is the chunk of my code that is attaching a movieclip (from timeline), tracing thisDot works so it is not the variable which is a problem but there is no rollover applied to the attached movieclip.
var dot_name:String = new String(Graphs[s]._name+"_dot"+i);
var dotObj:Object = new Object();
if (prevX != undefined) {
dotObj._x = newX;
[code].....
I have a button which on ROLLOVER shows a MOVIECLIP on the stage and on ROLLOUT it should remove it from the stage.Check out this code which perfectly works as i want
[Code]...
but my problem is wen i go back to same button after a rollover, the movie clip doesnt show or code does not respond.
I have a MC containing a picture and a button. I have a "rollover" on my MC like, if the mouse rolls over, the MC plays.. But then, as I have a rollover command over the MC, the button in the MC seems not to be working anymore.
View 3 Repliesi have some buttons and movieclipss. when roll over to the buttons i want to make some mc's alpha 30.
here is my code for buttons
[Code]...
ok this is working but this set the alpha property very fast (instant) how can i make them to change their alpha by level, level (like motion tween)
Is there some [code] which resizes a mc (length and width) when you rollover/mouseover it?
View 1 Repliesfor (k=1; k<7; k++) {
this["btn0"+k].onRollOver = function() {
var yBtn:Tween = new Tween(this["btn0"+k], "_y", Strong.easeOut, this._y, this._y-8, 1, true);
}
};
[Code]....
I try to use tweening script for going up and down with a movie clip. But when I export, the button just keep going down and not going up again.
On layer 2 I have my movie clips loc1, loc2, loc3....etc... inside a movie clip (Inner Main) , and on layer 1 I have a movie clip (click).
Code:-
for (i in mc) {
if (typeof (mc[i]) == "movieclip" && i != "click") {
[code].....
I'm using AS2 (Flash CS3). I have an invisible button that on rollover should play a movie clip. Within that movie clip I need it to play frame 33. However, when I use the following code it does absolutely nothing. Instance name of the movie clip is "flavorIcons".
on (rollOver) {
flavorIcons.gotoandPlay(33);
}
I have a set of 9 buttons, all have the 4 rollover stages, i.e up, over, down and hit. I want the hit stage to remain in bold color, till the user selects another button. How do I code this?
View 3 RepliesI have got a movieclip and inside is one shape tween. (instanceName = myMovie)
I have also got a button, (instanceName = myBtn) when i rollover the button i want the movieclip to play the shapetween. Im using this code: myBtn.onRollover = function(){myMovie.play();};
All the code, buttons, and movieclip are on the smae layer and the same key frame.
However i keep getting this error: Description: 1119: Access of possibly undefined property onRollover through a reference with static type lash.display:SimpleButton. Source: myBtn.onRollover = function(){ What am i doing wrong?
how I can replace one movie clip with another when I click on the first one. Below is my code that shows me loading the first movieClip and adding it to the stage and assigning a OnClick listener.
thumbs_button.addEventListener (MouseEvent.CLICK, playVideoButton);
for (var i:Number = 0; i < my_total; i++) {
var playButton_url = "play_now.png";
[Code].....
I have a movieClip that I use as a background which sits underneath two textFields that are dynamically generated... I have added MouseEvent.MOUSE_OVER and MouseEvent.MOUSE_OUT to that movieClip so that I can change the alpha value to fade in/out the background...
The problem is when you directly rollOver on top of the textField which prohibits the MouseEvent.MOUSE_OVER happening on the background movieClip...I tried to set the selectable to false on those textFields, but that did not have any effect...
How to check in as3 if there was a roll_over occurred on one of the mc?
View 4 RepliesI have a movieclip in my animation, call it mc_1. When i roll over it i would like to display 2 buttons near mc_1 - arrows up and down. With these buttons i can control y coordinate of mc_1 (including these buttons). So i've tried something like this.
Inside mc_1 i've created 2 keyframes. First includes only mc_1. Second includes mc_1 and two arrows (movieclips also).
[Code]...
I'm having trouble attaching a sound to a movieclip so that it will be played on rollover.I've named the sound "click" and checked export for actionscript in the linkage properties. My movieclip is titled "contact" and has an instance titled "c1"
View 4 RepliesI have created a MC button & i was wondering if anyone could tell me how to attach sound to the rollOver event? Current AS is;
this.onEnterFrame = function(){
if(rewind == true){
prevFrame();
[code].....
I have read the tutorial: [URL], and I based my flash file off the code given there. I would like to, instead of letting the thumbnail_mc's scroll when you rollover them, have buttons on either side that scroll (slow when mouseover and fast when pressed) the mc's instead. Here is what I have, which doesn't seem to work:
Code:
previous_btn.onRollOver = function(){
thumbNailScroller(30);
};
next_btn.onRollOver = function(){
thumbNailScroller(30);
[Code] .....
I have a menu that I want to add some actions on so that when the mouse rolls over each button symbol, a large clip that takes up all of the background changes colour. I could do that with a simple rollover this. but that changes the colour in one sudden stroke while what I'm looking for is a gradual pass from tint A to tint B. As an example, If button A is yellow and button B is blue, it should show the pass from green as I switch from button to button.
View 2 RepliesHow do I put a rollover on a dynamically created movieclip?
I have several movieclips being placed inside a container movieclip and I need them to have onRollOver, onRollOut and onRelease events. The way I usually target and do this...
_root.mcContainerName.mcName.onRollOver = function() {
_root.mcContainerName.mcName.gotoAndStop("over");
}
...does not seem to work for whatever reason. However, if I put a named instance of the movieclip on the stage myself and target it in exactly the same way (with similar syntax), the rollover works fine.
Is it possible to have the cursor change to a hand sybol when the user rolls over a certain movieclip without changing the movieclip to a button or using the following code?
play_select_mc.buttonMode = true;
The reason that I cant use these two methods is because I'm using the 'button' to allow the user to click on the swf in their browser to activate keyboard functions. Turning my mc into a button or using the above code does not activate these functions, the user still has to click on the swf. Clicking in an mc works fine, I just want the hand symbol.
I got this movieclip. With actionscript I attached a new movieclip to this one, as a popup menu, which will show on rollover. Inside this movieclip, it automatically makes textfields, as menu options (information I receive from a XML document). The problem is, that I cannot get it to respond on a onRelease function on those text fields, and I do not know why.
Heres the code for the textfields
Actionscript Code:
marray = explode(",",mn);
var sizes = 0;
for(var i=0;i<=marray.length - 1;i++){
trace(i);
mc.menu1.createTextField("txt"+i, i+59, 0, sizes, 100, 25);
mc.menu1["txt"+i].onRelease = function() {
getURL("[URL]", "_blank");
};
mc.menu1["txt"+i].text = marray[i];
sizes = Number(sizes) + 25;}
I tried to make a onRelease on one of the links, but it just wont work probably.
Here is the set-up.
I have a scene where there are 10 artist names. Each artist name is a button with a rollover image. The first artist name has an uploadMovie command in the timeline to show an image immediatly when the user opens the page.
_root.attachMovie("anne_01", "screen",1);_root.screen._x =417.9;_root.screen._y =135.7;
How do I unload that movieclip when the user scrolls over the nine remaining buttons? I know it is an unload command but I am not sure what the code should be or where I should put it. I have tried to put an unload command on the other buttons but I had no luck~
Odd, I thought this code should accomplish what I need what am I missing?
myBtn.addEventListener (MouseEvent.MOUSE_OVER, loadit);
function loadit (e:MouseEvent):void{myLdr.source = ("4girls_hbo.psd");}