ActionScript 3.0 :: Play A Movie Clip With A Button?
Feb 14, 2009i am tryin to play a movie clip with a button and my code is like this..
stop();
function onSouthClick(evt:MouseEvent):void {
gotoAndPlay("southsouth");
[Code]....
Similar Posts:
ActionScript 3.0 :: Flash - Play Movie Clip With The Button Click Without Playing All The Movie Clips On The Main Timeline
Apr 26, 2009I'm trying to make a flash website that has clickable buttons that will play different movie clips. But I dont know how to make it to just play the movie clip with the button you click without playing all the movie clips on the main timeline.
View 1 RepliesGet A Movie Clip To Play When A Button Is Clicked ?
Apr 12, 2009On looking into buttons, I understand that to get a movie clip to play when a button is clicked you simply place the movie clip on the buttons 'hit' state. Having done this it does not work? Have I read wrong? Also the movie clip has a background the full size of the stage area. So when I attach this to the button, the button changes size to the same size as the movie? (i.e. whole stage area). How do I keep the button in it's original size while still playing the movie clip with large background?
View 2 RepliesActionScript 2.0 :: Play A Movie Clip On Button?
Jun 12, 2010I have a simulation of a 3d rotation in a movie clip and what I want to do is on button press:
1) check to see if the movie clip is on a certain frame and if it is do nothing
2) if it is less than the 16th frame reverse the movie clip and play until it gets to a certain frame
3 if it is more than the 16th frame play until it gets to a certain frame
ActionScript 2.0 :: Play Movie Clip From A Button?
Nov 18, 2009I have a button which I have made into a button symbol.
I have created a movie clip in which a panel fades in and out.
I would like to play the movie clip when the button is hovered over.
I have the below entered on the button but not sure what to put next to make the clip play.[code]...
ActionScript 2.0 :: Play And Rewind Movie Clip Button?
Oct 2, 2009I made a vertical list of thumbnails and converted them into a movie clip. There is a total of 20 thumbnails. I masked the movie clips so that it only shows 5 thumbnails at a time. I created keyframes at every point in the clip that 5 thumbnails are shown so that I can pause it.I was trying to use this code to scroll down from the first set of 5 to the second:
on (release) {
design_thumbnails.gotoAndPlay (20)
}
When I click the button nothing happens I'd also like to know how to rewind the movie so that when I press the up arrow it goes up to the previous set of 5.
Here's what it looks like:I made a vertical list of thumbnails and converted them into a movie clip. There is a total of 20 thumbnails. I masked the movie clips so that it only shows 5 thumbnails at a time. I created keyframes at every point in the clip that 5 thumbnails are shown so that I can pause it.I was trying to use this code to scroll down from the first set of 5 to the second:
on (release) {
design_thumbnails.gotoAndPlay (20)
}
When I click the button nothing happens I'd also like to know how to rewind the movie so that when I press the up arrow it goes up to the previous set of 5.
ActionScript 3.0 :: Play Movie Clip On Button Click?
Apr 8, 2010I have been using flash for a while, but AS3 is a whole new world to me.
I simply want to have a movie (box1) to play when a button (btn1) is clicked.
NOTE: The button is within a movie clip (bulb1) which is within another movie clip (trees).
I tried this, but it just kept replaying the whole animation:
Code:
btn1.addEventListener (MouseEvent.CLICK, onClick);
function onClick( event:MouseEvent):void
{
box1.play();
}
ActionScript 3.0 :: Click Button To Play Movie Clip?
Dec 7, 2010I am working on a project that I have three movie clips animate onto the stage.I then have 3 buttons come up correlating with each movie clip.How do I script the buttons to play the movie clips?The movie clips are embeded FLV files just fyi.
View 4 RepliesMake Movie Clip Play On The Over Stage As A Button?
Dec 23, 2009I have a very simple fla i built, all i need is the hover "over" stage to play this tween. On the keyframe I made it a symbol, movie clip. In there all the tweens are set exactly. It seems if you wanted motion on a stage,you would just put that clip on the over stage. I uploaded the fla file: [URL]
View 6 RepliesActionScript 3.0 :: Create A Play Button For Movie Clip?
Aug 16, 2010Bit new to this and have been searching the adobe forums and google. I am trying to create a button that will play an imported MovieClip.I have a movie clip that I've imported into it's own layer (Layer1) Frame 1 I've given the MovieClip an instance name offoundationMovie.I've created a button and have that on its own layer(Layer2) above layer1, it is also in Frame 1.I've added a top (); action to layer2The video is not set to autoplay.I want the video to start playing when the viewer clicks the button. I know I've got to put some kind of event listener using AS3 in my timeline somewhere.I've found some code and I've been trying to work with it. I'm sure I've mutilated it beyond usability but this is what I've got.
stop ();
player.addEventListener(MouseEvent.CLICK,play);
function play(event:MouseEvent)
[code].....
Flash :: Play Movie Clip When Click On Button?
Sep 16, 2011I working on the timeline and have some Actionscript 3 code (I have a actions layer on the timeline). I am not sure what the code is for clicking on a button(I made the buttons movie clips since I wanted to animate it) and it plays a movie clip.
View 2 RepliesActionScript 3.0 :: Play A Movie Clip By Clicking A Button
Nov 20, 2010I have a button on the stage called 'play_btn' and a movieclip called 'movie_mc'. The movieclip has a stop on it's first fame so that it doesn't play on the main timeline. I want to use actionscript to have the movieclip play when the button is clicked.I know i need to do some kind of movie_mc.gotoAndPlay('2') on the button or something like that.
View 1 RepliesActionScript 3.0 :: Get A Movie Clip To Continually Play Using A Button?
Feb 21, 2011I am using flash. I have a layer containing my movie clip animation. Another layer contains my 2 buttons and a 3rd layer contains my action script. Here is what I have managed to do- I got the stop and play buttons to work so when the movie plays I can click play and then click stop and the animation will stop and play as I ask. I added a stop(); command at the beginning of my script so that when the movie loads nothing plays until I click play. The problem is I would like to click play and allow the movie to continually play over and over even when it finishes. However I would like to keep the movie with my stop(); command so when it loads nothing plays until I ask it to.
what I can do so that when I click play my animated movie clip continues to loop again and again.
HTML Code:
stop();
start_btn.addEventListener(MouseEvent.CLICK, startCircle);
function startCircle(e:MouseEvent):void{
[Code].....
Actionscript 3.0 :: Button To Play Movie Clip Backwards?
Apr 9, 2009I've made the outline of a site in AS3, on one of the pages it has an area that shows some text and images. If you click on the right arrow, the current info flys off to the left and the new info comes on from the right. This is done by just having a movie clip with a load of stops and code that says "absorbentInfo.play();" so it plays forward to the next bit of info.What I would like is a way to make it play backwards to the previous stop, so that it could cycle indefinitely either way.Code for the next button below.with the previous button.
Code: Select allnextButtonAbsorbent.addEventListener(MouseEvent.ROLL_OVER, nextButtonAbsorbentOver);
nextButtonAbsorbent.addEventListener(MouseEvent.ROLL_OUT, nextButtonAbsorbentOut);
[code].....
ActionScript 2.0 :: Play Movie Clip While Dragging Button?
Apr 26, 2004I was wondering what the best way is to play a movie clip while dragging a button inside a separate movie clip. Example: I'm creating a children's book in Flash form. Some childrens' books have movement using a pull tab on the side of the page. I have created two things for one of these pages:
A) The pull tab movie clip consisting of a button inside of it. Its code is as follows:
on (press) {
startDrag(toggleDrag2,false,596.5,118.0,666.5,118. 0);
}
on (release) {
stopDrag();
}
This way (and it works), the pull tab cannot be dragged along the y axis, and its movement along the x axis is restricted.
B) A movie clip with a symbol in it that has a motion tween, 75 frames, a stop action and key frame on each of the 75 frames.
[Code]...
Actionscript 3 :: Flash - CS4 Play A Movie Clip When A Button Is Clicked?
May 17, 2011I want to play a movie clip when I click a button.I made 3 states: inicial (how it looks before anything happens) (up)hover (plays an animation after waiting 20 frames) (over)click (plays an animation right away) (down)I placed these movie clips inside of my button's up, over, and down frames. This works great except when I click, i'll need to click and hold for my animation to get past the first frame.
View 1 RepliesActionScript 2.0 :: Make A Certain Movie Clip Play When Press A Button?
Dec 5, 2005i need to make a certain movie clip play when i press a button.
View 4 RepliesActionScript 2.0 :: Making A Movie Clip Play ONLY When A Button Is Pressed?
Jan 17, 2011I have a button, labeled "Main1," in a scene, "Main." When I click said button, I want an animation to start. Said animation is a movie clip named "ArrowAnim."Now, I have done something similar before in another project, using a code which I thought would have worked with this movie clip as well. The code I used before (and which worked flawlessly) was:
Code:
on(release)
{
[code]......
ActionScript 3.0 :: Make Button To Go To Play Frames On The Scene But Not Inside The Movie Clip
May 26, 2009I have a movie clip on a scene with a button inside. How can I make this button to go to play frames on the scene but not inside the movie clip in AS3.0?
View 7 RepliesActionScript 2.0 :: Play / Pause Button To Control Movie Clip (file Attached)?
May 27, 2010I am using CS3 with Actionscript 2.0I am trying to get a play / pause button to control a movie clip.I have placed the MC on one layer and the button on another layer.The button works great.All I need is the AS to control the timeline of the movie clip.
View 1 RepliesActionScript 3.0 :: Moving The Play Head In The Main Timeline From A Button In A Movie Clip?
Jun 23, 2009I have a movie clip that loads and when it is done playing it has a close button that unloads the movie clip... I want to add code to this button that moves the play head to frame 20 of my main timline using actionScript 3.0
View 10 RepliesIDE :: GotoAndPlay Button - Play Frames 5-10 On A Movie Clip Inside The Current Frame?
Nov 23, 2009is there anyway to have a button play frames 5-10 on a movie clip inside the current frame, as well as skipping to...lets say...frame 10 of the scene?
i want to create a site where buttons go to different pages, but those pages have animations in and out.so if someone is in one page, and clicks a button to go to another, that page plays the "out" animation while the other page plays the "in" animation.
ActionScript 2.0 :: Get Button To Play A Movie Clip (a Door Opening) And The Same Button To Close The Door
Sep 3, 2004im trying to get 1 button to play a movie clip (a door opening) and the same button to close the door i know its possible and i think its by arrays
View 1 RepliesActionScript 2.0 :: Get 1 Button To Play A Movie Clip (a Door Opening) And The Same Button To Close The Door?
Sep 3, 2004im trying to get 1 button to play a movie clip (a door opening) and the same button to close the door i know its possible and i think its by arrays .
View 1 RepliesActionScript 2.0 :: Create A Section For A Site Where Mousing Over A Button Will Play A Certain Frame Of A Movie Clip?
Dec 10, 2009Flash CS4/Actionscript 3 I am trying to create a section for a site where mousing over a button will play a certain frame of a movie clip, which is sitting next to the button. Mousing over different buttons will play (and stop) different frames in the movie clip.
View 1 RepliesActionScript 3.0 :: Flash - Movie Clip To Play Unless The Person's Mouse Curser Is On The Movie Clip For More Than A Second
Jun 24, 2010I am pretty new to ActionScript 3 and Flash. I don't want my movie clip to play unless the person's mouse curser is on the movie clip for more than a second. If the person just runs their curser over the movie clips really quickly, then it should do nothing. It must be more than a second. How do I code that?
[Code]...
Flash :: Play Movie Clip Instance Inside Of Button Instance?
Apr 16, 2011I placed a movie clip instance inside a button, and I want this movie clip to play when the button is released. I'm using this code on the frame containing the button:
function playMovie(event:MouseEvent)
{
this.theButton.theMC.gotoAndPlay(3);
[code].....
Actionscript 2.0 :: Movie Clip Play, Stop And Play On Mouse Event?
Sep 1, 2010I want a movie clip (let's call it homecontent_MC) with 100 frames play to frame 80 and stop.Then when someone clicks a button on the navigation bar (home, about, services, contact, etc...) homecontent_MC would then begin playing from it's position (frame 80) til it reaches 100, at which point it wouldn't be on screen, and the movie clip that corresponds to the navigation button press (say services_MC...) would start from frame 1 and continue til it stops at it's frame 80...
View 7 RepliesActionScript 2.0 :: On Button Release Clear Current Movie Clip And Bring In New Movie Clip
Feb 21, 2010I have created a flash website, each button is a movie clip with an invisible button over it containing the following script
on (rollOver) {
_root.mouse_over_profile_btn = true;
}
on (rollOut) {
[Code]....
each page is also a movie clip and on release of a button its played. the problem is that when i press another button to play another movie clip 'page' the old content is still there.
Is there a way of reversing the page transition i have used to bring out the movie clip and then bring in the next movie clip.
ActionScript 3.0 :: MC To Loop That Is Inside A MC - Play Head Of A Movie Clip To Return To A Certain Frame Of That Clip
Nov 2, 2010I would like play head of a movie clip to return to a certain frame of that clip so a MC inside it would loop. I now have: stop(); as the action.
View 2 Replies
