I have a very simple fla i built, all i need is the hover "over" stage to play this tween. On the keyframe I made it a symbol, movie clip. In there all the tweens are set exactly. It seems if you wanted motion on a stage,you would just put that clip on the over stage. I uploaded the fla file: [URL]
View 6 Replies
i need to make a certain movie clip play when i press a button.
View 4 RepliesI have a movie clip on a scene with a button inside. How can I make this button to go to play frames on the scene but not inside the movie clip in AS3.0?
View 7 RepliesI'm trying to make a flash website that has clickable buttons that will play different movie clips. But I dont know how to make it to just play the movie clip with the button you click without playing all the movie clips on the main timeline.
View 1 RepliesI wanted to make a preloader do something else besides just fill a bar. I wanted to make a movie clip play during loading, but I also wanted it to play and finish in time with the loading. For instance, if I created a movie clip of a boat slowly filling with water, and it was the preloader, my movie would load as the boat filled and when the boat was full the movie would be ready. The water fills as fast as the movie loads.
View 6 RepliesI simply have a rectangle vector image of a landscape and I want it to zoom in when I play it...and I guess stop at a certain point. Not a clicking function or roll over, just when I start up my swf file or go to that specific scene I want it start zooming (gradually, not fast either)
View 6 RepliesI'm working in CS4 on AS2.
I have a series of buttons that when clicked go to certain frames which all display different content. I have a unique movie clip on each one of these frames that has an initial play in, followed by a loop, and finally a play out for when they leave that frame.
I have it so the movie clip plays in and then loops, but I want the movie clip to play out when a user clicks a different button that leads them to another frame and other content. But because they can click the buttons in any order they like I can't specify the play out to the buttons.
Can I make the current frame's movie clip play its "play out" part when I switch frames?
I have a series of buttons that when clicked go to certain frames which all display different content. I have a unique movie clip on each one of these frames that has an initial play in, followed by a looping animation (the character walks in, then loops waving or something of that nature), I would like the movie clip to have a play out animation (character walks off) when the user leaves that frame so that when they go to the next frame the new movie clip can play in (new character walks on screen). [code]...
View 0 RepliesHow do you make a movie clip play at a random time? And keep on playing at random times until the flash movie is over.
View 1 RepliesI'm trying to make a short clip = a website introduction - where feathers fall from above the stage eventually covering it completely. I've created movie clip with the animation (motion via motion tweens) - and what I'd like is for multiple instances of the Movie Clip to appear above the stage, then the Movie Clip to play, hence feathers falling randomly.I'd also like to put a time delay on the appearing of each new instance (ideally random) so that when the movie clip plays the falling feathers aren't perfectly synchronised (which they would be were all the instances to appear at the same time).I've tried playing with the scripts suggested in this thread with limited success: showthread.php3?t=259911(Also, I'd ideally like to change the tint on each movie clip (to a limited set of colours) instance to vary the colour of the feathers, but that's maybe a complication too far for the moment!
View 5 RepliesOn looking into buttons, I understand that to get a movie clip to play when a button is clicked you simply place the movie clip on the buttons 'hit' state. Having done this it does not work? Have I read wrong? Also the movie clip has a background the full size of the stage area. So when I attach this to the button, the button changes size to the same size as the movie? (i.e. whole stage area). How do I keep the button in it's original size while still playing the movie clip with large background?
View 2 RepliesI have a simulation of a 3d rotation in a movie clip and what I want to do is on button press:
1) check to see if the movie clip is on a certain frame and if it is do nothing
2) if it is less than the 16th frame reverse the movie clip and play until it gets to a certain frame
3 if it is more than the 16th frame play until it gets to a certain frame
i am tryin to play a movie clip with a button and my code is like this..
stop();
function onSouthClick(evt:MouseEvent):void {
gotoAndPlay("southsouth");
[Code]....
I have a button which I have made into a button symbol.
I have created a movie clip in which a panel fades in and out.
I would like to play the movie clip when the button is hovered over.
I have the below entered on the button but not sure what to put next to make the clip play.[code]...
I have a listener which traces the Y value of mouse:
stage.addEventListener(MouseEvent.MOUSE_MOVE,f);
function f(e:MouseEvent){
trace(e.localY);
}
I need to make a movie clip play when the localY value is less than .25 of stageY, or even less than 150 would work.
what im trying to do here is have a button's (named btn) over and out states make a movie clip play forward or reverse. and my fla is named MCC. im fairly new so the more detailed explaination of the code the better. this is my code so far in the MC
[Code]....
I made a vertical list of thumbnails and converted them into a movie clip. There is a total of 20 thumbnails. I masked the movie clips so that it only shows 5 thumbnails at a time. I created keyframes at every point in the clip that 5 thumbnails are shown so that I can pause it.I was trying to use this code to scroll down from the first set of 5 to the second:
on (release) {
design_thumbnails.gotoAndPlay (20)
}
When I click the button nothing happens I'd also like to know how to rewind the movie so that when I press the up arrow it goes up to the previous set of 5.
Here's what it looks like:I made a vertical list of thumbnails and converted them into a movie clip. There is a total of 20 thumbnails. I masked the movie clips so that it only shows 5 thumbnails at a time. I created keyframes at every point in the clip that 5 thumbnails are shown so that I can pause it.I was trying to use this code to scroll down from the first set of 5 to the second:
on (release) {
design_thumbnails.gotoAndPlay (20)
}
When I click the button nothing happens I'd also like to know how to rewind the movie so that when I press the up arrow it goes up to the previous set of 5.
I have been using flash for a while, but AS3 is a whole new world to me.
I simply want to have a movie (box1) to play when a button (btn1) is clicked.
NOTE: The button is within a movie clip (bulb1) which is within another movie clip (trees).
I tried this, but it just kept replaying the whole animation:
Code:
btn1.addEventListener (MouseEvent.CLICK, onClick);
function onClick( event:MouseEvent):void
{
box1.play();
}
I am working on a project that I have three movie clips animate onto the stage.I then have 3 buttons come up correlating with each movie clip.How do I script the buttons to play the movie clips?The movie clips are embeded FLV files just fyi.
View 4 RepliesBit new to this and have been searching the adobe forums and google. I am trying to create a button that will play an imported MovieClip.I have a movie clip that I've imported into it's own layer (Layer1) Frame 1 I've given the MovieClip an instance name offoundationMovie.I've created a button and have that on its own layer(Layer2) above layer1, it is also in Frame 1.I've added a top (); action to layer2The video is not set to autoplay.I want the video to start playing when the viewer clicks the button. I know I've got to put some kind of event listener using AS3 in my timeline somewhere.I've found some code and I've been trying to work with it. I'm sure I've mutilated it beyond usability but this is what I've got.
stop ();
player.addEventListener(MouseEvent.CLICK,play);
function play(event:MouseEvent)
[code].....
I working on the timeline and have some Actionscript 3 code (I have a actions layer on the timeline). I am not sure what the code is for clicking on a button(I made the buttons movie clips since I wanted to animate it) and it plays a movie clip.
View 2 RepliesI have a button on the stage called 'play_btn' and a movieclip called 'movie_mc'. The movieclip has a stop on it's first fame so that it doesn't play on the main timeline. I want to use actionscript to have the movieclip play when the button is clicked.I know i need to do some kind of movie_mc.gotoAndPlay('2') on the button or something like that.
View 1 RepliesI am using flash. I have a layer containing my movie clip animation. Another layer contains my 2 buttons and a 3rd layer contains my action script. Here is what I have managed to do- I got the stop and play buttons to work so when the movie plays I can click play and then click stop and the animation will stop and play as I ask. I added a stop(); command at the beginning of my script so that when the movie loads nothing plays until I click play. The problem is I would like to click play and allow the movie to continually play over and over even when it finishes. However I would like to keep the movie with my stop(); command so when it loads nothing plays until I ask it to.
what I can do so that when I click play my animated movie clip continues to loop again and again.
HTML Code:
stop();
start_btn.addEventListener(MouseEvent.CLICK, startCircle);
function startCircle(e:MouseEvent):void{
[Code].....
I've made the outline of a site in AS3, on one of the pages it has an area that shows some text and images. If you click on the right arrow, the current info flys off to the left and the new info comes on from the right. This is done by just having a movie clip with a load of stops and code that says "absorbentInfo.play();" so it plays forward to the next bit of info.What I would like is a way to make it play backwards to the previous stop, so that it could cycle indefinitely either way.Code for the next button below.with the previous button.
Code: Select allnextButtonAbsorbent.addEventListener(MouseEvent.ROLL_OVER, nextButtonAbsorbentOver);
nextButtonAbsorbent.addEventListener(MouseEvent.ROLL_OUT, nextButtonAbsorbentOut);
[code].....
I was wondering what the best way is to play a movie clip while dragging a button inside a separate movie clip. Example: I'm creating a children's book in Flash form. Some childrens' books have movement using a pull tab on the side of the page. I have created two things for one of these pages:
A) The pull tab movie clip consisting of a button inside of it. Its code is as follows:
on (press) {
startDrag(toggleDrag2,false,596.5,118.0,666.5,118. 0);
}
on (release) {
stopDrag();
}
This way (and it works), the pull tab cannot be dragged along the y axis, and its movement along the x axis is restricted.
B) A movie clip with a symbol in it that has a motion tween, 75 frames, a stop action and key frame on each of the 75 frames.
[Code]...
How can i make a movie clip the same width and height of the stage using actionscript, when the width of the movie isnt known?
View 12 Replieswhat is the script in CS4 to make a button play a movie?I have a button that opens each page as a movie. To align the movie I use a blank movie.I have been using the below....what replaces it in CS4?
View 1 RepliesI want to play a movie clip when I click a button.I made 3 states: inicial (how it looks before anything happens) (up)hover (plays an animation after waiting 20 frames) (over)click (plays an animation right away) (down)I placed these movie clips inside of my button's up, over, and down frames. This works great except when I click, i'll need to click and hold for my animation to get past the first frame.
View 1 RepliesI have a button, labeled "Main1," in a scene, "Main." When I click said button, I want an animation to start. Said animation is a movie clip named "ArrowAnim."Now, I have done something similar before in another project, using a code which I thought would have worked with this movie clip as well. The code I used before (and which worked flawlessly) was:
Code:
on(release)
{
[code]......
How do i make a movie clip go back to the main stage once it is clicked.. it has a roll in and out which is inside the movie clip.. i have a door and i want it so when you click the door it goes to another key frame on the main stage
View 1 Replies
