I was just getting used to actionscript 2 now 3 comes along.. I have this segment of code: this.parent.videoOne.gotoAndPlay("playing") it doesn't work in AS3, in the parent I have a movie clip instance called "viedoOne" with a frame labeled "playing". Anything I do that doesn't involve movie clip instance names gets the job done. But what else do I do to make this work when instances are involved?
View 1 RepliesI have a flash page where I am loading another .swf into. With a button in the loaded swf I need to unload the loaded swf (where the button is) and navigate to a specific frame label in the parent .swf. I've tried to do the following in the key frame where the swf get loaded into I've put the following:
var gallery_load_wonderland:Loader = new Loader();
gallery_load_wonderland.contentLoaderInfo.addEventListener(ProgressEve nt.PROGRESS, loop_wonderland);
gallery_load_wonderland.contentLoaderInfo.addEventListener(Event.COMPL ETE, done_wonderland);
gallery_load_wonderland.load(new URLRequest("gallery_wonderland.swf"));
function loop_wonderland(e:ProgressEvent):void {
[Code] .....
I basically want to first load the swf called "gallery_wonderland.swf". Then in the "gallery_wonderland.swf" there's a button called "contact03_btn" which I want to unload "gallery_wonderland.swf" even though it's inside the swf and navigate to the frame label called "Contact" in the parent swf.
What can I do I've done similar before and it works, but when I do it know and I click the contact03_btn it comes with following error message:
TypeError: Error #1034: Type Coercion failed: cannot convert flash.display::Stage@26215ba1 to flash.display.MovieClip.
at gallery_wonderland_fla::MainTimeline/back_wonderland()[gallery_wonder land_fla.MainTimeline::frame1:227]
I have a button on the main timeline. When clicking it, I would like to move the main timeline to a frame label called "history" and load and play a movie clip called "slideshow1".
I have the "gotoAndPlay" code working properly but can't seem to get the external swf "slideshow1" to load and play.
I've inserted the following code into the frame label "history" actionscript.
var myrequest_history:URLRequest=new URLRequest
("http://floramultimedia.com/musicGarden/main/swfs/slideshow1.swf");
var myloader_history:Loader=new Loader();
myloader_history.load(myrequest_history);
[Code]....
I have a button on the main timeline. I would like to move the main timeline to a frame label called "history" and load and play a movie clip called "slideshow1".
I have the "gotoAndPlay" code working properly but can't seem to get the external swf "slideshow1" to load and play.
I've inserted the following code into the frame label "history" actionscript.
[Code]....
I have a MovieClip named "all_Pages" inside of it has timeline tweening on its child "pg" which has sets of pages as child of pg on framesHere is the problemI am trying to execute the code written on all_pages first frame which is 6th frame
all_pages.pg.gotoAndPlay(6);
while executing all_pages.gotoAndPlay(1); // timeline tweening
i.e
[code].....
Anyway what I need to do is have a movie clip finish playing when a button is clicked and then go to the frame label associated with the button. I hope I'm explaining myself ok. So if I had say 4 buttons Home Gallery About Contact If Contact is clicked then I want the Home page to play (Which is a fade out) and then go to Contact Page (which will fade in). Then If Gallery is clicked then I want Contact to fade out and then go to Gallery page and fade in.
View 6 RepliesIs it possible to change a frame label within a gotoAndStop('label') with the parameters in a function?I'm playing around with updating code as I learn more and more techniques, and at the moment the code is a basic click-a-button to select the object shape, and on press the button disappears:
// Change the object into a circle.
circle_btn.addEventListener(MouseEvent.CLICK,function(){changeShape_fun(circle_btn,circle);});
// Change the object into a square.
square_btn.addEventListener(MouseEvent.CLICK,function(){changeShape_fun(square_btn,square);});
[code]....
However I can't/don't seem to know how to change a frame label through function parameters, or if what I'm trying to do is even possible.Also to note, while I'm all ears for any more efficient ways of doing what I'm trying to do, I would still like to know how/if you can change frame labels through function parmeters.
is there an action script code that enables the timeline to automatically enter a frame label on entering a certain frame.
View 1 RepliesI'm trying to get this function to target myClip_mc and movethe frame head to another frame label.
var counter:Number = 1;
//textBeGone
invisible_btn.onRelease = function(){
counter++;
if(counter % 2 = true) {
[code].....
What is the code to make you jump to a "Label" in a parent movie clip, when clicking on a button.Lets say the buttons name is push_btn and I am in mc2 and the label is located in mc1.
View 8 RepliesI am trying to create a project where I have a homemade button with a label component inside converted to a MovieClip. I have added an event listener, which triggers successfully when I move into the MovieClip, but retriggers when I move into the label within the MovieClip. Is there anyway to tell it to stop retriggering and act as a single MovieClip, or would it be simpler to break down and just try to customize the Button component?
Here is a sample of what I'm trying to do:
Code:
import flash.events.Event;
btBox.addEventListener(MouseEvent.CLICK, funcClick)
btBox.addEventListener(MouseEvent.MOUSE_OVER, funcClick)
btBox.addEventListener(MouseEvent.MOUSE_OUT, funcClick)
[Code]......
Notice how it thinks I mouseOut of btBox when the mouse went over the label, and went back to the btBox after I left the Label.
is it possible automatically name frame label with instance name of item in frame.
View 2 Replies1. I make a simple movie (call it movieClip) first frame has stop(); action, second frame has label playMovie, last frame has action gotoAndPlay(2); (so that movie not stop anymore2. Now I place movieClip on stage3. Question... what is code to make movieClip play frame label playMovie?
I already try to put many different type action in frame one of stage
this.movieClip.gotoAndPlay("2"); //NOT WORK
this.movieClip.gotoAndPlay(2); //NOT WORK
[code].....
Yesterday Kglad gave me the following :
nextTX.onRelease = function (){var nextFrameLabelNum:Number = (1+Math.round(thTX._currentframe/27))%10;
thTX.gotoAndPlay("next "+nextFrameLabelNum);
}[code].....
which works great IF I am moving one image at a time.What I have done now is tween 3 slides to move into a visible mask by pressing next, but when I press previous of course the above doesn't work.It just jumps to the previous three with no tween.I would like to maintain the tween but in reverse.I would like the previous just to undo, in reverse, what the next button just did with the tween?Is there anyway to make this happen with as 2.0?
if its possible, via AS3, to create a frame label in a movieclip on a specific frame.
Obviously I can do it by manually by setting up labels on the timeline within the target movieclip, but I would rather use an array so I can loop through it, creating a label name on a the specific frame each time?
so for example I would end up with:
myLabelOne on frame 10
myLabelTwo on frame 25
myLabelThree on frame 115
etc
I am trying to use this if statement with a frame label instead of a frame number. I believe that _currentframe is looking for a number only. Is there a different command that looks at frame labels instead of frame numbers?
View 1 Repliesis it possible to find the frame number of frame label with AS if a button is rolled over, the timeline jumps to a label - which plays a set of 3D rendered frames to 'raise' and element, once a user rolls out of the 'button' area the button is meant to 'lower' - which can be done by simply playing backwards to the previous label.
View 5 RepliesI am trying to use this if statement with a frame label instead of a frame number. I believe that _currentframe is looking for a number only. Is there a different command that looks at frame labels instead of frame numbers?
View 1 Replieson my website there a short animation playing when u click one of the links the animation is in a MC on main timeline, when the animation is at frame 30, the main timeline needs to jump to a specific label
so until now, if u click portfolio, MC starts playing, and after 30 frames this codes brings the maintimeline to label "portfolio"
Actionscript Code:
MovieClip(this.root).gotoAndStop('Portfolio');
With this code, i can only jump to portfolio from MC so i need to code to be more dynamic
so i thought, i create a var, and fill it with a string every time a link is clicked
Actionscript Code:
var geklikt:string = "Home";
then the code in MC checks the content of the var, and then plays the matching label
how should i recode the first line of code, so that it plays the label matching the var?
I have a tween on this mc and after its finished its supposed to play "goal", a label inside it (code is on the main timeline and the label inside the mc). But, well, i dont know why but it doesnt.. Heres the code:
Code:
stop();
import com.greensock.*;
[code].........
Is there a simple way to get the frame number of a frame label?
View 2 RepliesI am loading a swf into an empty MC with this code:
on(release) {
loadMovie("movie.swf", _root.container);
}
what I want to do is also go to a specific frame or frame label in that loaded movie. I thought I could do it by adding something like this:
_root.containter.gotoAndPlay("frame");
Is there a way to get the frame label on a specific frame, without it being the current frame?
I've tried accessing it through:
this.scenes[0].labels but it doesn't allow me to check a specific point on the timeline.
I've got an object (an instantiation of my own class that extends Sprite) being created in the actions for a frame, like this:
Code:
import Scripts.CFoobar;
var foobar:CFoobar = new CFoobar();
[code]........
Trying to go to a frame label - 1 frame -
[Code]...
Does anyone know why if I use
on (press) {
_parent._parent.gotoAndPlay(19);
}[code]....
it will work? My labeled frame is two parent mc's previous and it doesnt work when I call to it with the label?I would really like to use the label so if I move my keyframes around I dont have to change a lot of code.....
I have three buttons, btn_1,btn_2,btn_3, and two movie clips, image_1,image_2. The names listed btn_1,btn_2,btn_3, image_1,image_2. are all instance names. All buttons and movie clips are on their own layer in a single frame on the main time line. the movie clips have a stop action on the first and last frame, with a frame label, on the first frame in the sub time line. For image_1 the frame label is image_1_1 and for image_2 the frame label is image_2_1.
I would like btn_1 and btn_2 to control the movie clips, image_1,image_2. Either button should be able to close the other buttons movie clip and play it's own movie clip. Also i am trying to make the movie clips themselves have the ability to be closed by clicking on the movie clip image area that is playing. Both movie clips when not playing hide behind the appropriate button with an alfa of 0.
When playing they expand to the middle of the window and are at 100% alfa, using a tween. The third button, btn_3 should only be visible when one or the other movie clisp are playing. btn_3 dose nothing else but this for now. As of now, my movies continuously loop and btn_3 is always visible. I can't seem to figure this out. my code for this action is:
[Code]...
how to code this on a button
onrelease
gotoandplay(10); // i need delay here before activating the next code below//
gotoandplay(80);
the trick is.. i want the button to play frame 10 to 40 then after playing from frame 10-40 the movie stops and then play frame 80 to 100
I have four movie clips (.f4v) in 4 frames in a movie with watch buttons.. This movie has them been imported into a main movie container that has next and previous buttons. However if i play a movie then hit next frame, the movie continues to play in the background. The code below shows one of the actionscripts for a movie clip and then the main actionscript in the main movie.[code]...
View 1 RepliesI have an invisible button and only one mc, the mc loops 3x then stops, this is defined with as in mc.
Now i want to play the movie from the invisible button but only loop it once. Which means i would like to play it from frame 1 to frame 215.
And also when u rollout i would like the movie to stop and go to frame 1.
this is my button code so far
Code:
on (rollOver) {
tellTarget ("loader")
{
[Code]......