ActionScript 3.0 :: Unload From Child And Navigate To Frame Label In Parent SWF
Sep 16, 2010
I have a flash page where I am loading another .swf into. With a button in the loaded swf I need to unload the loaded swf (where the button is) and navigate to a specific frame label in the parent .swf. I've tried to do the following in the key frame where the swf get loaded into I've put the following:
var gallery_load_wonderland:Loader = new Loader();
gallery_load_wonderland.contentLoaderInfo.addEventListener(ProgressEve nt.PROGRESS, loop_wonderland);
gallery_load_wonderland.contentLoaderInfo.addEventListener(Event.COMPL ETE, done_wonderland);
gallery_load_wonderland.load(new URLRequest("gallery_wonderland.swf"));
function loop_wonderland(e:ProgressEvent):void {
[Code] .....
I basically want to first load the swf called "gallery_wonderland.swf". Then in the "gallery_wonderland.swf" there's a button called "contact03_btn" which I want to unload "gallery_wonderland.swf" even though it's inside the swf and navigate to the frame label called "Contact" in the parent swf.
What can I do I've done similar before and it works, but when I do it know and I click the contact03_btn it comes with following error message:
TypeError: Error #1034: Type Coercion failed: cannot convert flash.display::Stage@26215ba1 to flash.display.MovieClip.
at gallery_wonderland_fla::MainTimeline/back_wonderland()[gallery_wonder land_fla.MainTimeline::frame1:227]
Parent swf has a button to load Child swf and Child swf has a button to unload itself through a dispatchEvent. Both in respective document classes. Parent loads Child fine... Child can't remove itself! Anyone have an idea what I am doing wrong here? Or another way to go about this? Struggling for a day now...
Parent swf:
public var myLoader:Loader; loadButton.addEventListener(MouseEvent.CLICK, loadSWF) public function loadSWF(e:MouseEvent):void {
I have the following code on a frame label called "allemande" (frame 890). The first part loads a swf when I click a button called "allemande" that sends me to this frame. This part works correctly.
The second part is code that sends the timeline to the "home" frame label when I click the "home" button. This works OK too.
I would like to insert code that will unload the "allemande_slideshow" swf when I click the "home" button to go back to the "home" frame label.[code]..
I am trying to create a project where I have a homemade button with a label component inside converted to a MovieClip. I have added an event listener, which triggers successfully when I move into the MovieClip, but retriggers when I move into the label within the MovieClip. Is there anyway to tell it to stop retriggering and act as a single MovieClip, or would it be simpler to break down and just try to customize the Button component?
If you haven't met me yet, that's because I'm pretty new around here. I picked up ActionScript just earlier this week, actually. Name's Kate. Nice to meet you. All righty. I'll start by saying that I've been referencing this thread:
actionscript.org/forums/showthread.php3?t=222486 (I'm not allowed to post URLs until I've got at least 50 posts in?! Gasp.)
I was just getting used to actionscript 2 now 3 comes along.. I have this segment of code: this.parent.videoOne.gotoAndPlay("playing") it doesn't work in AS3, in the parent I have a movie clip instance called "viedoOne" with a frame labeled "playing". Anything I do that doesn't involve movie clip instance names gets the job done. But what else do I do to make this work when instances are involved?
Using AS3. I have in my code a button to stop and remove the swf, but I would like to have in addition to unload a child swf when it plays it's last frame automatically - not using a button.
Here is my code on the main timeline: var loader:Loader; var closer:close; norton_btn.addEventListener(MouseEvent.CLICK, NortonDemo); function NortonDemo(e:MouseEvent):void { [Code] .....
Now, what do I need to add or change to this code and add to the code on the last frame of NortonDemo to accomplish what I want to do?
I am loading external swf's into a main load.swf, using a Moviecliploader object. What I basically want to do is that, after an external movie, say home.swf, loads another external swf, say about.swf, home.swf should be unloaded.
home.swf is loading about.swf into the _root.mc_holder, which is placed inside load.swf. I want all external files to be placed within this holder. Now this is working with some files, but not with others. My standard code within all files is this:
//code within home.swf to load about.swf var loader:MovieClipLoader = new MovieClipLoader();var ldrlistener = new Object();loader.addListener(ldrlistener);ldrlistener.onLoadStart =
I got a Parent Sprite, let's name it SpriteP, which holds inside it two other Sprites. Sprite1 and Sprite2.[code]Sprite2 is a rectangle. When I rotate it, of course, the height of its parent, SpriteP, GROWS. But I would expect that height to go back to what it should be when I'm removing Sprite2!And it does! If I remove Sprite2 while NOT being rotated, the height of the parent drops back to normal, 200.
i am slightly confused about the parent and child relationship. lets assume we have several different instances, what would be difference of adding them all as children of the stage and creating a parent-child hierarchy between them(other than the access path).
I got a Parent Sprite, let's name it SpriteP, which holds inside it two other Sprites. Sprite1 and Sprite2.
When Sprite2 is NOT rotated:
Code: trace(SpriteP.width + ' ' + SpriteP.height); //100 250. SpriteP.removeChild(Sprite2) trace(SpriteP.width + ' ' + SpriteP.height); //100 200. -> works, 200 is good. When Sprite2 is rotated at 90:
[Code].....
And it does! If I remove Sprite2 while NOT being rotated, the height of the parent drops back to normal, 200. But if I rotate Sprite2, the Parent won't update its bounds.
I have a frame that I want to display but the function that calls it exists on the parentHow do I call a frame that exists within a child movieclip from its parent?Here is my code. It is basically for a restart button.Here is the parent function.
I have a MovieClip named "all_Pages" inside of it has timeline tweening on its child "pg" which has sets of pages as child of pg on framesHere is the problemI am trying to execute the code written on all_pages first frame which is 6th frame
all_pages.pg.gotoAndPlay(6); while executing all_pages.gotoAndPlay(1); // timeline tweening i.e
I Have 3 Movies:MAIN.SWF, contains loading movie actions for Nav.swf and Home.swf.NAV.SWF, contains navagation menu loaded on Level 2 in Main HOME.SWF, contains slideshow for home page loaded on Level 1 in Main In NAV.SWF, there is a MOVIE CLIP "graphmc", which contains a BUTTON "graphicbtn", When this button is clicked, I'd like the HOME.SWF (which is loaded into Main.swf on Level 1) to fade out and unload, and load and fade in Graphics.SWF in place of it.
I have a component mxml file in which i have a view stack, on click of a button i navigate to the first child, now i need to navigate to the second child during onclick of a button present in the second child. All the childs are component files included within the view stack. How could this be done, Sample code is present below,
[code]...
Now in my offering.mxml file if i try to access navigationViewStack i am getting an error stating 'Access of undefined property navigationViewStack.
[code]All clips are squared.Ok, on the PlayerPlane, there are little soldiers, which have hotkeys. The effect I'm trying to create is I want to position the GameStage so that the currently selected soldier appears in the center of the GameClicker clip.The GameStage is movable by the player (to scan other areas of the map)by holding the CTRL key, so it's easy to kinda lose track of where your players are.I have tried using localTo Global and globalToLocal techniques, but I think I'm lost on the actual math of getting the GameStage to move the correct distance so that the selected soldier is centered to the GameClicker.[code]
I've got this interactive poem I've been working on for a class. I've basically finished each "episode" seperately. I made a parent document which essentially loads one of the ten child documents onto the respective key frame. Here's a sample of the code for the first key frame of the parent document:
Well Two things are messed up about it, well my "ChildTimeline2" variable will off and on assosciate itslef not with the main time line of a child document, but of a nested symbol inside said child document. Even worse, the "gotoAndStop();" command I will give sometimes applies to Parent document... yaay! but often it will apply to the child document. The end result being this horrible looping moment where you are stuck in one child document for all time.
I wish I could attach the documents but they exceed the 300KB. how I can get Actionscript to listen fro the last frame of the maintimeline of the child document, or tell flash to gotoandStop for the parent document
I have the following code to load an external swf by clicking a button. It works fine.
btn_01_01.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF); function fl_ClickToLoadUnloadSWF(event:MouseEvent):void { var url:String = event.currentTarget.name+".swf";
[Code].....
But the loaded swf is still visible.
I would like that button to also unload the loaded swf.
I got a "preloader" that creates an movieclip and loads an SWF. Now in the loaded SWF i want a close button to go back to the "preloader". The preloader isn't an actuall preloader but some sort of mainclip.Now i tried this:removeChild(MovieClip(e.currentTarget).parent.pare nt.parent)But i get error:ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.at flash.display::DisplayObjectContainer/removeChild()at MethodInfo-6()
if I add a clip to the stage as a child and remove the parent and set the parent equal to null, does the child get collected and removed from memory? What if the child has an image loaded into it as its child?
In my application I'm loading a series of png images as overlays that can be tinted for customizing in this app. When I trace my memory, the basic app idles at 64,000 k. The exact second I load those overlay images it goes up to 205,000k. If I remove those clips and "clear" the stage I should go back down to 64,000 k if everything is removed and collected correctly, right? It's not, it's hanging at 215,000 k. Are my images being cached and that is the reason for the memory staying up? If so, how do I prevent that. Or upon removing the parent of the image how can I un-cache the image.
If a user switches between models and loads several different items then the application actually crashes the Flash environment because of too much memory usage. It also does the same to browsers.
I have a parent swf which loads many child swfs (though only one is displayed at a time). My intention was to use the loaded SWFs document class to retrieve an array of objects to be assigned a tab index, combine this with the parent's own array of objects and apply sequential tab indices to them all. But what happens is actually that the parent's objects are assigned an index, but the external swf is unaffected. In fact, the external swf retains its automatic tab indexing, when I would expect that having set a value for InteractiveObject.tabIndex, automatic tab indexing would be disabled.
I've seen similar tales elsewhere. Most posts I've read are wanting to load an external swf, give it focus and loop through those objects, then close the swf and return to looping through the parent. However I would like loop through all objects as one. including manipulating the focus manager(s), and basically fiddling with every tab-related property I know.
Is it possible to change a frame label within a gotoAndStop('label') with the parameters in a function?I'm playing around with updating code as I learn more and more techniques, and at the moment the code is a basic click-a-button to select the object shape, and on press the button disappears:
// Change the object into a circle. circle_btn.addEventListener(MouseEvent.CLICK,function(){changeShape_fun(circle_btn,circle);}); // Change the object into a square. square_btn.addEventListener(MouseEvent.CLICK,function(){changeShape_fun(square_btn,square);});
[code]....
However I can't/don't seem to know how to change a frame label through function parameters, or if what I'm trying to do is even possible.Also to note, while I'm all ears for any more efficient ways of doing what I'm trying to do, I would still like to know how/if you can change frame labels through function parmeters.
trying to on mouse over set the parent of the moused over text field to the highest depth child of its parent i tried both of these: [code] private function
I have an issue where removechild won't infact remove a child. I think its something to do with my dropTarget.parent issues. The concept of the code is that you drag a source onto a destination. When you drop the source onto the destination you will get a text field that says "Hello" or "Goodbye". The objective i want to achive is that once i drop a source onto the destination, removechild will remove any previouse textfields added. This is proving difficult.
I am trying to make a calculator where a user can select from a list of items. If a user clicks say "ITEM1", it should add the item to a "CONTAINER_MC". The problem i have is all my data is set inside an array containing names and prices like the code below.
Here is a working script to drag drop a ball from the stage into another target mc:
ball.addEventListener(MouseEvent.MOUSE_DOWN, pickUp); stage.addEventListener(MouseEvent.MOUSE_UP, dropIt); function pickUp(event:MouseEvent):void{ [code]...
It works well but I'm new to AS3 and I am having difficulty amending this script to drag the ball out of a parent mc (instead of the stage) and onto another mc (the target mc). To explain: imagine a ball, a box, a tri, + more shapes all within a scrolling mc (initial parent), the user scrolls to select a shape, then drag-drops onto a target mc on the stage.The scrolling is no problem, but how would you amend the script above so that the ball can start inside a parent mc rather than on the stage itself?
Im using Flash MX (the pre-02004 version) to design a photo portfolio that will be distributed on CDs to potential clients.Its broken up into subject galleries, each of which is its own movie clip.The pages of those gallery movie clips are all separate movie clips, too, regardless of whether they contain single images or layouts of images. Frame labels with stop codes separate each gallery_mc.
Within each gallery, previous and next buttons allow page-to-page navigation.From the last page of gallery_A_mc (e.g.), I can to go to the first page of gallery_B_mc by using the following ActionScript:
on (release) { this._parent.gotoAndStop("gallery_B_FrameLabel"); }[code]....
Id think that this should make it go to frame 5 of gallery_B_mc,which is on the gallery_B_ FrameLabel, but it doesn't make it go anywhere.
on (release) { this._parent.gotoAndStop("gallery_B_mc", 5); }
I am needing to load a movie from with in a movie into the origional movie and then unload the first loaded movie. hahaha ok. Say I have a movie called M1 and M1 has an animation sequence that needs to run befor it loads but because of positioning issues they need to be loaded seperatly into different loaders. My my plan is to load M1Animation into ldr on my time line, then play the animation and at the end do something like
[Code]....
My problem is this sounds great in my head but the code above doesn't work
