I have a map that I need to plot points on based on latitude and longitude. I have seen formulas for how do to this on a map that has a mercator projection, but the map I'm using has cylindrical equidistant projection used on it, and I haven't seen any for that.
View 0 RepliesI have a new project which requires getting the Longitude and Latitude coordinates on a world map. I have searched everywhere for either the code or a tutorial,
View 4 RepliesI have suppose to plot a data(create one movie clip) in India map, So i am having values in longitude&latitude.
View 1 RepliesI need to convert latitude longitude values into pixel positions as well as do the opposite. I've found many solutions to go from lat/lng->pixel, but can't find anything on the reverse.
A couple of notes:
The map is a fixed size, no zooming, no tiles. I don't need anything super accurate, its not important. Preferably mercator projection, but not required. I'm not actually display the result. (Any 2D projection) I can't rely on any web based API's, ie: no Google Maps
A solution in almost any programming language would be fine, as long as it doesn't rely on any platform specific APIs.
This is an example of going from lat/lng->pixel:
var y = Math.round(((-1 * lat) + 90) * (this.MAP_HEIGHT / 180));
var x = Math.round((lng + 180) * (this.MAP_WIDTH / 360));
I have the coordinates of a player and another object. Both are with geographical coordinates (Latitude and longitude). I have also the direction in what the player is facing (compass). How can I calculate the angle to the other object from the player direction? e.g. I want to know if the object is to the right/left of the player and how many degrees.
View 3 RepliesI want in my application show multiple markers on google map .only address of the city or country is provided but without latitude and longitude of the city
View 2 RepliesI cant "center" my project, like you can see its "fixed" (yellow lines) in the left side and I cant see "invisible" part of project... (area around the project). how can I move my project so I can see the not-project area around the project. (picture 2).
At the moment situation... (cant see that area around the project)
http://img19.imageshack.us/img19/1186/68553623.png
I would like to add a widget board to my flash project so users can embed my project in their web page or wiget display. To see what I'm talking bout go here [URL] and click the white + mark on their widgets.If your a moderater please put this in the correct area, and consider making it a sticky so we can post new ways to impliment in different sites as they become available.
View 2 RepliesI am working on this one project that has a couple of movieclips (already placed on stage) which have a custom class set to export via the Library. Each of those custom classes loads an external SWF using URLRequest().
Is it possible (or, what is the best way) to preload the whole project first, including the external SWFs?
I just wanted to ask if I have a project created in authorware and one more in director.I just wanted to ask can we convert authorware project in flash directly or indirectly?Or can we import authorware project and/or director project in flash.does anybody know or anybody has done this b4???
View 1 RepliesMaven 2.2.1 unzipped,M2_HOME set and repository altered to point to different drive location in settings.xml Flex 4.0:
Installed Created a multi-modular webapp project using flexmojo:
mvn archetype:generate
-DarchetypeRepository=http://repository.sonatype.org/content/groups/flexgroup
-DarchetypeGroupId=org.sonatype.flexmojos
-DarchetypeArtifactId=flexmojos-archetypes-modular-webapp
-DarchetypeVersion=RELEASE
with following options
groupId=com.test
artifactId=test
version=1.0-snapshot
[code]....
Parent pom has swc, swf, war as modules.
Dependency is war->swf->swc.
With parent artifactId of swf, swc, war set to swf, swc, test respectively.On executing mvn on test folder(for that matter clean or anything) I get this following error.
G:Projects est>mvn -e
+ Error stacktraces are turned on.
[INFO] Scanning for projects...
Downloading: http://repo1.maven.org/maven2/com/test/swc/1.0-snapshot/swc-1.0-snapshot.pom
[code]....
Looks like its trying to download the project from maven's central repository instead of building it.
I am developing a project in Flash Builder which will load a file built by Flash CS4. The code in Flash CS4 is below, it's a doc class. I am sure the dispatchEvent has been invoked[code]...
View 1 RepliesI've recently started making a game in FlexBuilder. The game is currently a Flex project. Is there any downside to using Flex as opposed to just Actionscript? A friend of a friend told me that Flex is slower than an Actionscript project. I've been unable to validate this on the internet; is there any truth to that claim?
View 6 RepliesIf I create a new flex project with flashbuilder, these are the libraries that get included by default through the Flex SDK[code]...
View 1 RepliesI have a CodeIgniter project and I made a back-office in Flex. I was wondering how I can implement the Flex project in my CodeIgniter since I'm working with routing I can't route to any directory. So there isn't a way to display the back-office.
View 1 RepliesI have one Eclipse Workspace containing two projects. - The first is my actual library. - The second is example code for using the library.When I push this code to GitHub, I don't want two separate projects, I want the example code to go into an "example" folder of the second library.How and where would I do this? From Eclipse, GIT, or GitHub?Or is there a better way of including sample code in GitHub projects? (the example code doesn't actually need any version control)
View 1 RepliesI am going to make an Arabic application using Flex builder 4.5. I have two questions that need to be answered What is the difference between ActionScript Mobile Project and Flex Mobile Project. (AS Mobile Project supports iOS and Android but I doubt about it!!)
Is Arabic support available in Flex Mobile Projects or AS Mobile Projects? I know TLF supports Desktop and web apps but does it support mobile platforms?
I have a flex mobile project and I want to convert it into web-based project. What is the best way to do it.
View 1 RepliesI have set up a Flash Project to publish two FLAs simultaneously.However, when I click on "Test Project" I get the following error message:Quote:Cannot open a protected movie.However, when I publish each of these FLAs independently, I do not get the error message and the file publishes and runs with no problem.
View 0 RepliesI'm starting to learn in flex and ruby on rails. I see some projects there is a flex folder under rails_project/app which contains controller, models, views. I think it's not mannually to add these folders to rails project.
View 2 RepliesI have 2 flex projects which were create in flash builder 4.5.....how can i call one project from second??? the best would execute to the same window.... I'm interesting about both possibility (in browser and air too).
View 1 RepliesI have a "Loader.exe" that loads a bunch of external swfs. Ideally, I would've liked to be able to give my client just 1 exe, so that they wouldn't have to deal with multiple files/directories etc. However; each of the external swfs have audio, and in some cases video, which makes trying to combine everything into 1 .fla prohibitive because the file size of that .fla shoots through the roof. Even just trying to navigate through graphics to edit animation becomes a sloooow process.
So, I was trying to come up with ways to bundle/package my Loader.exe as well as the external swfs into a single file (almost like a .zip file). I know there are 3rd party programs out there (Flash Jugglor) that can do this... but I was hoping there may be some built-in feature. So, I thought using a Flash Project (.flp) might be able to accomplish something similar, but I could only find the following couple of sentences about FLPs:
"Create a new Flash Project file (*.flp). Use Flash Project files to group related files (*.fla, *.as, *.jsfl, and media files), set up publish settings for the group, and implement version control options."
I am new to flex and web programming. I created a canvas that I want to put on the web. What are the steps to do it?
I use a mac and I am using Fetch to put files.
I have created a complex flex project. It consumes around 30% CPU, then I cut down the browser?
View 3 RepliesI'm new to flash mx 2004 and I'm having a problem publishing and playing my finished project. Every time I try to play or publish the project I get a 'The Flash program is out of memory. Please increase virtual memory on your PC' message. I was originally working on a 1 gig RAM PC and thought this was the problem. I've since borrowed a 2 GIG RAM PC which allowed me to do a little bit more work before I got the same problem. I then got a 4 GIG PC and was able to finish the project but if I try to play it or publish it the program crashes. Any Ideas. This is a college project which I need to publish as a windows exe file and I can't do it. I don't know what's wrong. The project is about 280 meg in size. I tried to 'save and compact' but it still crashes. I also tried to debug the flash project and it crashed again. I'm baffled as I think a 4 GIG PC should be ample and I no longer think that this is entirely a RAM problem anyway.
View 1 Replies I am not exactly new to Flash in that I can do several things with it. However, I am not anywhere near expert status. I am working on an interactive map of a college campus for my employer. I am employing buttons that, when moused over, display a large image of each campus building. The question is this: is there a way to also have maybe an actionscript that would center that image automatically?
In other words, if the building I want to show is on the right hand side of an internet explorer window and I mouse over it, is there a way to have the map auto scroll the window to center the image that pops up on mouse over?
I'm new to Flash authoring, and something seems puzzling. I see that it is possible in Flash to render an animation (project) to AVI or MOV video formats, and it seems to work fine (although you can't choose your AVI codec,
which seems like a trivial feature to put in. Is there a way to render a Flash animation to FLV? I am working on a project that will play FLV video files inside an FLV player object (SWF object). I would like to create FLVs from inside Flash, using the nifty animation tools and whatnot, and have them play in the same manner as the other FLV videos created by other tools (e.g., FinalCut Pro edited video). I realize the FLV is video
I am dynamically loading images into my project using xml. If possible I'd like to use one xml file for the whole project and target different parts of the xml file. How can I target different parts of the xml file?
Ex:
<murals>
<image .....>
</murals>
[Code].....
Only access the images in the murals section when wanted and only access the images in trompe when wanted and so on.
He's working in Premiere Pro CS3 (Windows XP 32-bit version) in an XDCAM 1440x1080 project using 1080p footage at 25fps and 1.33 pixel aspect ratio. In that project he's got SD footage shot at 720x560 at 25fps interlaced at 1.422 pixel aspect ratio.
The SD footage is converting OK-ish which is suprising, but because of mpeg2 compression from Encore (also a CS3 program) it ruins the on-screen text and titles, which are made in HD anyway so cant work it out.
I was wondering if there is a way to import a Flash project into another flash project, i have something that can only be done so far in AS2 and my main project is using AS3
View 5 Replies