basically i want an action to take place when my mouse is within a certain amount of pixels of the edge of the screen (or boundaries). I know the AS2 code, but need it in AS3.I realise that listeners are going to be needed, so if anyone is kind enough to help me out convert this code
heres the as2 code:
root.onEnterFrame = function
if(_root._xmouse<50){
instanceName.prevFrame();
}
Is there a way to control mouse movement with actionscript.Based upon an event I want to programmatically move the mouse to a specific location.
View 3 Repliesim trying to create a conversion utility that uses number input via calculator style buttons to generate conversion for the following distances:
-Miles to/from KM
-cm to/from mm
-binary to/from decimal
Now i was thinking of possibly having the options contained within an drop down and an input text field where the numbers are entered via the calculator buttons. The only thing im struggling with is how to perform the actual calculations on the different formats. Has anyone had to do anything similar in the past? Ive only found currency conversion examples and not sure how to apply that to these conversions.
I wanted to modify the XML Portfolio Tutorial to be able to create a grid of images with the thumbnails.I'm not sure how to control the x and y coordinates of the thumbnail images using the method shown in the tutorial.
View 6 RepliesI've been trying to do is to move a string of thumbnails - thumbHolder_mc - incrementally (like every 386 pixels) left and right, controling it with arrow buttons. Code below works like a charm EXCEPT when I try to stop the tween motion on either end.
I tried everything - _visible = false, enabled = false, delete function, etc etc, nothing works. In the my script below, buttons get disabled, but never recover. Function never comes "back to life", which is what I thought it was supposed to do:
[Code].....
All I've been trying to do is to move a string of thumbnails - thumbHolder_mc - incrementally (like every 386 pixels) left and right, controling it with arrow buttons. Code below works like a charm EXCEPT when I try to stop the tween motion on either end. I tried everything - _visible = false, enabled = false, delete function, etc etc, nothing works. In the my script below, buttons get disabled, but never recover. Function never comes "back to life", which is what I thought it was supposed to do: stop(); //connect right and left arrow buttons to
[Code]...
I used a tutorial ("Photo Gallery and Thumbnails: Flash Tutorial!" by tutvid on utube) to create a gallery on my website. I love the thumbnail navigation but, I want it to play like a slideshow when it first opens and I want to add play/pause buttons. I am using Flash MX 2004 and don't know much at all about actionscript or how to make these modifications. I emailed the author of the tutorial to see if it was possible to make these changes his reply was: "Yes, it is possible to modify the file in this way, however I don't remember how I set it up so I wouldn't be able to re-code it for you in this email. I would take a look around the web at Actionscript 2.0 slide shows and see if you can use the code they are using and make it work with your gallery."
View 4 RepliesI'm learning actionscript and would like to add a sound to the code below when a thumbnail is selected. The code is from Adobe Flash CS4Classroom in a book. The flash settings are AS 3.0 and Media Player 9.0
ActionScript Code:
//
thumbnails_tl.addEventListener(Event.CHANGE, thumbnailClicked);
function thumbnailClicked(event:Event):void {
[code]....
I'm trying to make a picture gallery which has over 100 images, I want to be able to scroll through the thumbnails left and right on mouse over, but I can't figure out what code to use. I tried following this tutorial on youtube, but the person working on it is using AS 2.0. I'm working with AS 3.0
View 3 RepliesHaving a problem coding a mouse over small image to enlarge effect. I have a filmstrip of photos at the bottom of my page and want the user to be able to enlarge them slightly by rolling over them with the mouse. Id like this to happen as smoothly as possible. Having a real problem with something so simple.
View 2 RepliesHaving a problem coding a mouse over small image to enlarge effect. I have a filmstrip of photos at the bottom of my page and want the user to be able to enlarge them slightly by rolling over them with the mouse.
View 7 RepliesIn summary, I have an image scroller that loads a series of thumbnails defined in an XML file. All of the image load and begin scrolling. When I rollover the scroller, the scrolling stops then resumes again when I roll out.My problem: In addition to a mouseover pausing the scroller, I would like to be able to load text from another XML node based on which thumbnail the mouse is currently over.My question: How do I keep track of which thumbnail the mouse is over? Do I need to create an additional array to keep track of the thumbs or is there a simpler way to do this?
View 1 Repliesi want to make my thumbnails move opposite of where the mouse is.so for example, if i move the mouse up the thumbnail moves down, if i move the mouse left, the thumbnail goes right etc...im trying to google this but i dont even know what its called so im not getting good results, or rather TOO many varied results lol. i was told on another forum that its called parallax menu or something like that but when i research it, i get millions of pages refering to this type of effect (they have other that move vert/horiz too)
View 5 RepliesI am building a gallery which scroll the thumbs according to mouse position. It all works but I try to tell the scrolling to stop with the last thumb on each side, and there I am stuck. I attach the scroll function. The inner if statement is meant to stop the scrolling at a certain point (the 800 is just a number I try, I need to make it more flexible). It works when the mouse move to the right but does not work when it moves to the left.
View 3 RepliesI have an xml with following structure[code]...
i just learn the basics of creating movie clips and loading xml into flash etc..
but to complete my task i need more reference from you peoplethat is why i described the whole thing
I have made a image-viewer. I've this AS for the viewer:
Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
function loadXML(loaded) {[code].....
Now i would like to make a loop for the thumbnails so they don't have a beginning or end(Now when i scroll to the right the thumbnails stop at the last thumbnail, i want it to begin at the first thumb again).I'm also trying to make that the middle thumbnail represents the photo in target_mc.
I am making a gallery, which you can view here:[URL]ok, firstly, when you click a thumbnail, you cannot scroll them until you roll off the click thumbnail, and I'm not sure why. is it just a movieclip thing? or can I put some code in to re-get focus of something? ok, now for the two general questions:
1. When you roll over the thumbs, they go up, sometimes they flick back down though, even though you are rolled over them still. is this just because they are moving?
2. Does anyone know why when I add this:
[Code]...
I am creating something that uses separate .as and .fla files, and I was wondering if there would be a way to place a textfield inside a movieclip, and then be able to control it from the code, for instance, I want to make an achievement animation that pops up whenever I tell it to, but I want it to say different things, while the text is also animated
View 6 RepliesIm trying to create via xml and a for() loop a thumbnails wiewer and each thumbnail have a simple onrelease function.....but my probleme is that my 'container' movieClip and 'BT' movieClip dont show when I export the movie...also when i trace()them the output is empty. maybe is because they are inside x.onLoad(xml){} function ? At the end of the script you can remove // before the trace() function for ckecking in the output panel. here is my code:
xml file: TumbLoader.xml
<?xml version="1.0" encoding="ISO-8859-1"?><slideshow><photos thumbnail="thumbnail/1.jpg" /><photos thumbnail="thumbnail/2.jpg" /><photos thumbnail="thumbnail/3.jpg" /><photos[code]...
I tried to control a background music volume using this code
soundInstance = new Sound();
soundInstance.attachSound("1");
soundInstance.start(0,999);[code]....
"1" is a linkage identifier. everything works perfect...music plays and volume decreases.but not only the attached sound... the whole movie volume changes even the swf I've loaded in my clip. I just need to control the background music("1" linkage) not all the sounds. what's the problem here? how can I make this happen?
i need code for swf player.the player consists of play, pause ,stop, next and previous with seek bar and time control.i had try my code which not support my swf ......the code is
function swfLoadedHandler(e:Event):void {
trace("swf loaded");
currentSWF=MovieClip(swfLoader.content);
[code]......
I am building an AIR application and I was planning to include the mx:HTML control but I can't seem to get the control to display. Here is the code:
var tmpHtml:HTML = new HTML();
tmpHtml.htmlText = "<a>This is the sample </a>";
tmpHtml.x = 48;
[code].....
i need code for swf player.the player consists of play, pause ,stop, next and previous with seek bar and time control.i had try my code which not support my swf.[code]
View 3 RepliesDoes anybody have actionscript code for a volume control on an website interface? I already have a button that allows the user to turn off or on the audio but a volume control would be nice to compliment it.
View 2 RepliesI wanna move the object using up down left right but I duno the codes..
View 12 Replieshow to create the proper Actionscript code that will control the Alpha Transparency of a MC I want as a preloader. I want the MC to start of at 100% alpha-transparency, and then decrease to 0% alpha-transparency when the whole Scene is loaded. Also, it should show the precentage of the Scene loaded. I have the code that I thought would work to control the alpha transparency of the mc and loading it. But, I get confused with the perloader code to incorporate into the alpha transparency code? Does this make sense; is it possible?In Leaman's Terms, As the scene loads, the mc goes from invisible to visible at completion of the scene load.
Here is the code:
Code:
onClipEvent (enterFrame) {
loading = _parent.getBytesLoaded();
total = _parent.getBytesTotal();
[code]....
Now, I have no idea if and where you'd include the poper code to control the mc's alpha transparency based on the percentage of the scene loaded? Can someome maybe rework the code to make this work. And use a working example, that way I see it working to fully understand the concept? The mc's instance name is "sm_logo". Where would I use the instance name in this code, or better yet the proper code alltogether?
can't find no way of controlling the mouse position. What I need to do is this:
Take control of the mouse, move it from it's relative position to another position, and then give the user back control.
I've created some animated buttons (using movieclips of keyframe animation) and when the mouse goes over the button it starts a new animation sequence.now I would like to add some text when the mouse goes over the button but I tried adding the text I want to a new layer of the animation but obviously this just plays for the duration of the animation sequence or if I add another keyframe so it only shows for a short time then it will flash up each time the sequence loops around (I don't want the overstate sequence just to play once - I want it to keep going while the mouse is over the button)
View 7 Replieshow to control the perspective of a image/movieclip with the position of the mouse. I've been looking everywhere but so far no succes.
The effect i'm looking for is exactly like the one on this site:[URL]
How would I go about using an external video in which the video would scrub (or move forward or rewind) when the user clicks on an object and drags the object left or right? I want to make a site in which the user has control over the movie, and when they choose left or right, the video will scrub to a certain cue point. wants it hits that cue point, the video will seek to another cue point and the story will continue. I want to make it so when the user clicks on the person, and drags them, it scrubs through the video as if the person is walking in a certain direction. I think I have the cue points set up properly, now to just figure out the rest.
View 2 Replies
