Actionscript 2.0 :: Top Down Falling Particle Effect To Reveal Dynamic Mask / Logo
Apr 8, 2009
I have plenty of ways of creating falling snow like effects, but a client has just comitted me to an effect as a test of my ability without talking to me first, that I am a little stumped by.I need to have a top down falling snow effect (its actually supposed to be flour falling from a sieve but hey...). All the snow effects I know, fall down sideways on, from top to bottom, and then they disappear off the page (the flakes).I need the particles (movieclips) to fall downwards from a birds eye view, and 90% of them to disappear, but the remaining 10% to gradually (over about 5 seconds) build up a white logo (shape) in the middle of the screen.So I am guessing that I am going to have to be clever with dynamic masks to get the shape appearing a little bit at a time, and then I also need some random motion, and scaling as the particles fall downwards (and away) from the eye.
Before I jump in at the deep end, has anyone got any ideas on this, even just part of it (the falling particles or the revealing dynamic mask part) would be a great help.Please let me know if you can help with ideas and input in anyway, and I'll give you credit on the final project when complete, as well as much help as I can with game related scripting and deisgn/URL...
View 2 Replies
Similar Posts:
Apr 7, 2009
I have plenty of ways of creating falling snow like effects, but a client has just comitted me to an effect as a test of my ability without talking to me first, that I am a little stumped by. use AS2 or AS3 for this project because of the filters and tween effects available to me.I need to have a top down falling snow effect (its actually supposed to be flour falling from a sieve but hey...). All the snow effects I know, fall down sideways on, from top to bottom, and then they disappear off the page (the flakes).I need the particles (movieclips) to fall downwards from a birds eye view, and 90% of them to disappear, but the remaining 10% to gradually (over about 5 seconds) build up a white logo (shape) in the middle of the screen.So I am guessing that I am going to have to be clever with dynamic masks to get the shape appearing a little bit at a time, and then I also need some random motion, and scaling as the particles fall downwards (and away) from the eye.
View 1 Replies
Apr 8, 2009
create falling gold particle effect in flash.
View 8 Replies
Apr 14, 2011
I'm guessing this would be simple but I just started in flash and have no clue what I'm doing wrong here. I'm trying to add an animated logo effect using a linear gradient to create a glimmer effect, using a motion tween. In order to make it appear the logo glimmered with light every so many seconds.When I add a mask to the glimmer layer but the effect comes out obviously wrong. I read somewhere that in the action script I have to use "cacheAsBitmap" but that does not seem to effect anything.I found an example of the effect I am looking to do in a tutorial pertaining to text effectsI have seen this effect used thousands of times online, but there doesn't appear to be any tutor
View 6 Replies
Jun 14, 2003
I have a logo I created for my webpage with FreeHand. I have finally learned how to do a lighting mask to have the effect of the moving gleam across my logo, but whenever I try to create the effect (using different methods even) it isnt' working correctly. Only part of my logo is being affected by the mask. I have tried all the things that I can think of to make this work. So far the only thing that has worked is changing the vector logo into a jpeg and plugging it into flash, but I really don't want to do that due to resolution and cleaness of the image. I am including links to the 2 files - the original logo as well as the masking .fla file that I have been trying to make work.
[Code]...
View 11 Replies
Jul 14, 2008
I am trying to dynamically load images into this slideshow. I have 2 MC's, one with an animated mask, one without. I am trying to load an image into the first MC, have the mask reveal it, then load that image into the 2nd MC which is behind this one. This way, when the next image loads and has the mask show it, the other image will still be on the stage behind the new one, and so forth.Here is the excerpt of code from where the main actions are being done..
var myMCL:MovieClipLoader = new MovieClipLoader();
var myListener:Object = new Object();
myMCL.addListener(myListener);
var canMoveOn:Boolean;
[code]....
View 1 Replies
Jan 31, 2009
I have seen how mask in photoshop works. However flash mask does not work like that. I want to create a effect in flash with a image dynamically. Probably involving bitmapdata. As yo can see the second image is the actual one. I want to create the first one from the second one using actionscript. But the problem is flash masking does not understand gradient mask etc.
View 6 Replies
May 3, 2005
Code:
for (i=0; i<200; i++) {
circle.duplicateMovieClip("circle"+i, this.getNextHighestDepth());
randX = Math.floor(random(Stage.width));
randY = Math.floor(random(Stage.height));
this.banner.setMask(this["circle"+i]);
this["circle"+i]._x = randX;
this["circle"+i]._y = randY;
}
Circle is a movieclip that has a circle starting at 2px by 2px and expands to 100 by 100. Banner is just a movieclip, but I would like these expanding circles to act as a mask to reveal the banner. This should work, but isn't, I know I am overlooking something.
View 2 Replies
Dec 30, 2010
I'm a self proclaimed n00b when it comes to as3, but I'm learning rapidly.I followed this guide and created a great particle system: url...What I'd LIKE to do, if possible, is make those particles that are generated be the only part of an image that shows(mask). The tutorial contains a fla with a movieclip of a circle, two classes...particle and ball which call the movieclip and generate it on the stage.
View 1 Replies
Nov 25, 2008
I have a preloader using a mask, set to slowly reveal the target object from the bottom up as the movie loads. But there is something off with the code and I'm not a programmer.
View 8 Replies
May 25, 2011
I have a question, and I find it hard to find resources on it. I have two layers, and another layer with an image of a broom on it. I want to use the broom to move over layer2, and reveal the layer beneath it. Kind of making a sweeping game. Frankly my search efforts on google have only come up with alot of masking, but I am sure you need actionscript to make the broom move with the mouse.
View 1 Replies
Oct 6, 2003
The tutorial I am working on is at: [URL]. I have no problem with the fade grid effect itself but... I'm trying to make one of the squares (which is a guy in the middle of a scenic landscape) visible first giving the effect that you can only see him first, then the grid squares fade in to reveal the landscape that he is standing in.
So I tried just cropping the square out in photoshop, then just placing it in the exact same spot above the original image, but everytime the movie gets to the portion in the timeline with the actionscript, the little square with the man in it disappears. I want the square with the man in it, to remain on the stage from beginning to end, as top layer.
View 5 Replies
Jul 27, 2006
so I am requesting a little help to connect a few pieces of code I have; the end result being a particle effect that propels 9 different movieclips (pulled from the library) off 'into space'.
Here is the code to call a single movieclp, which I was able to create myself :
Code:
var i:Number=0;
function createMusic() {
origin.attachMovie('music', "music"+i, i);
[Code]...
View 1 Replies
Dec 10, 2009
I found a actionscript for falling snow. Problem is, I have some art that I want in front of the falling snow and can't figure out how or where to put the mask layer. Also, the more the test scene runs, the more snow gradually starts falling until I have a blizzard and can't see anything.
View 3 Replies
Apr 29, 2010
I am working on an intro to our website that has dog footprints go across the page. As they go across the center, they reveal the logo. My problem is each step reveals the logo ok, but when the next one appears the previous footprint disappears. Once the footprint mask reveals the logo, how do I get it to stay while the other footprints reveal the rest of the logo?
View 2 Replies
Jul 23, 2009
I'm trying to kill a particle effect I've made for this animation upon a button event. Here's my script as it appears at the keyframe before the animation moves on:[code]When either of the buttons are pressed and the animation moves on, I want to remove the smoke children I've created at the top.
View 2 Replies
Mar 1, 2010
I want to create a simple script in AS2 that can reveal and un-reveal some text upon clicking (and any additional graphic), preferably with a simple transition (likely a tween). How would I go about achieving this?
View 1 Replies
Jan 28, 2009
how can I make a gradient area for the shining effect, like in this logo ?
View 2 Replies
Jan 12, 2010
I have a particle generator class and I want to create a hitTestObject function on another object to check for any collisions with the particles produced.I bascially have a character already on the stage called character_mc and I want to be able to collect the particles, that means when the character touches a particle, the particle disappears.
View 1 Replies
Oct 1, 2008
I want to make the falling snow effect, but i need leaves instead of snow....
View 1 Replies
May 11, 2011
I am relatively no used to flash but wanted to put a flash effect to my logo for my site. I managed to do the effect on a site I saw on the next. The effect animations I used was hue and saturation effect. Here a direct link to the logo online with the effect. Anyway I cud do that on flash n stick it to my site ? I tried hosting it to the site I did it on n it takes ages to load. [URL].
View 1 Replies
Dec 30, 2005
I have the snow effect falling in the project. But during the falling of the snow I'm loading an external file into the screen. (animation from another prog in swf format) But the problem is that the new swf file is blocking the snow. How can I script the snow so that it will fall on top of the loaded file.[URL].
View 2 Replies
Mar 31, 2010
I'm trying to create a chasing reflection and a circular logo in flash, after effects or whatever!!! Do you know how to do this? It's more like if you had a chrome circular ring in your palm and as the sun hits it, the glare/shine would run around the edges of the logo, does this make any sense?
View 7 Replies
Feb 9, 2009
How can I make a shine effect with different intensity depending on the bottom logo?
(See attachment).
View 7 Replies
Aug 3, 2010
I am trying to make a text effect where the colours fill up inside the logo lettering as if water was being poured in. Is there a way of doing this either by Actionscript or some form of advanced masking perhaps?
[Code]....
View 1 Replies
Sep 29, 2004
I,m using flash mx, and I,m trying to use the tutorial of this page "Falling Snow" in the Special Effects section. I want to know if its posible to set a mask for an specifict area of the image, because I dont want to show the snow in all the movie, only in an area.
View 1 Replies
Sep 15, 2009
I just started working on a preloader screen that includes a preloader mask over a logo and a percentage dynamic text. I can get either or to work but not both at the same time. I notice that if I remove stop(); I can get the percentage to work but not the preloader image. With the stop(); embedded the image preloader works but the percentage doesn't.
[Code]....
View 2 Replies
Dec 29, 2010
Is it possible to make this a mask? The system contains one movieclip of a circle called ball, also a class called ball and a class called particle. I want the particle system movieclips to display an image...I'm sure this is possible...just have not been able to find a way. A little backround, I'm a completely selftaught n00b when it comes to AS3, but I'm grasping it fairly well... the tutorial is on this website, called A Simple Particle System Using Actionscript 3.
View 0 Replies
May 25, 2010
How should vector artwork be drawn in Freehand so that white details sitting over a blue base are still readable when alpha of e.g. 50% is applied in Flash 8 ? In Freehand 9 I created a logo. Logo has an rgb mix blue base rectangle and rgb white drawn shapes on top. I also drew over the text and gave it the rgb blue as a fill with line none. That sits on top of one of the white shapes.
[Code]...
View 1 Replies
Sep 18, 2009
im trying to create a flash effect using a mask layer.i want to have a text box which is invisible, and throu the timeline small peices of a mask layer will move over the text box, revealing the text. My problem is this, if i create a mask layer with more than 1 object, when i try to move the objects (for example in different directions so the text will reveal from both sides) then i get a weird movement from the objects (like the sum of both movements i wanted) so i was think maybe a layer can contain only one moving object.So i just cant figure how can i get the effect i want.
View 4 Replies
