Actionscript 3.0 :: Lee's Dynamic Sound Tut?
May 20, 2009
I recently watched and went through Lee's ASTRO dynamic sound tut .. I thought I'd give it a go with CS4. It all makes sense, and I copied the code exactly, bar trying to compile it at run time, as since that tut, CS4 has been released, and FP10 is standard for evelopment. However it simply doesn't work .. I get this error:1046: Type was not found or was not a compile-time constant: SamplesCallbackEvent.
Code: Select allpublic function DynamicSound():void
{
sound = new Sound();
[code]......
View 1 Replies
Similar Posts:
Oct 14, 2009
It's possible to play a sound file through AS, either by loading it from a folder or import it to flash. It's also possible to play a dynamic tone with flash.media.Sound + writeFloat.
But... is it possible to play a sound file with flash.media.Sound + writeFloat in some way? I want to play a sound file without having to deal with any files except the .swf!
View 9 Replies
Oct 1, 2011
This one goes out to those with audio engine troubles. I need seamless loops and both the Sound and sample data events are too clunky for my tastes for this purpose.
Last january I released the Thunder Snow transcoding library for more advanced networking and sound stream programming. [URL]...So here is how Im going to use it to do my sound engine loops in the current project.
First I need a class to consume the bytes and transcode to the netstream within the thunder snow framework. The class extends the BaseProvider as in so many other sound libraries.
[Code]...
View 0 Replies
Jul 16, 2009
like row sound we put buffer, like thisbuffer = new SoundLoaderContext(65000);_loop_snd = new Sound(new URLRequest(_mp3), buffer);
how can i put buffer in dynamic sound..as per your code where i can put buffer in below code..
_dynamicSound = new Sound();
_dynamicSound.addEventListener(SampleDataEvent.SAMPLE_DATA, onSampleData);
the dynamicSound genrated from the row sound, means i modify the row sound.
View 2 Replies
Sep 7, 2011
How can I load sounds using a loop? As there are around 20 sound files named something like s1.mp3, s2.mp3......sn.mp3
We can load sounds and create dynamic sound object in AS2 something like this:
ActionScript Code:
for(n=1;n<=20;n++){
_root["s"+n]=new Sound();
_root["s"+n].loadSound("s"+n+".mp3");
}
Is there anyway in AS3 to create dynamic sound objects?
View 1 Replies
Sep 23, 2004
on animating a movieclip(s) based on a sound stream..
Basically - something like a spectrum analyzer or a visualization effect for a media player..
It doesn't have to be complex - as the basics are all i'm looking for so that I can expand upon that to fulfill my own agenda
Also - the sound is going to be dynamic, being that the user will specify a file to play, so this can't be done with simple frame animation (unless I were to create ~16,000 different swf files.. .. . . Yea)
View 1 Replies
Jul 30, 2009
I've found a hand full of examples on dynamic sound utilizing the SampleDataEvent... however, I'm looking for any tips / info on wrangling that beast.
I'm looking for anything beyond producing a simple pitch machine - more info than just creating a glorified pitch-changing audio oscilloscope.
View 3 Replies
Nov 15, 2003
I have this script in the first frame of the first scene of my movie
[Code]...
which works fine when I test the movie locally, but when I c it to the server I get nothing. I tried using a .wav and a .aiff and still get nothing. Does anyone out there know why this is? Is it a server issue...maybe something to do with mime types? I'm at a loss.
View 5 Replies
May 5, 2011
I am able to generate dynamic sounds using flash player 10.Is there any way to save the data to a .wav file on the server?
View 1 Replies
Oct 24, 2007
i add sound to Particular letters in dynamic text box in flash8.
i am having a input box in which i entering some text. If the text is "HI" and i am displaying it in the dynamic output box when a button is clicked. now i need the sound to be played when the mouse goes over the letter "i". i can change the letters. similarly i need for the letter "A" also.
View 1 Replies
Apr 16, 2011
I am triggering short sounds dynamically from the library for a game (Specifically Air for Android). When the user clicks a button the sound can take up to 600ms to actually play. I have set it for any silence before the actual sound by calling the sound like so:
[Code]...
All return the same results. I know there are threads here that talk about this but none have offered a real solution that I can find. Is there no way to cache the sound or store it in a buffer?
View 1 Replies
May 21, 2010
I have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.
I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. (not sure if I'm able to give a link to it or not on here. If I able to and someone would like to see it let me know)
I want to know if my flash header can support the following additional functionality/changes:
1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?
2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.
4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?
I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features. Not sure I can afford help now because of being laid off and two different scammers taking advantage of me. So I'm going to try to do myself and see if there is any suggestions/support on here that can help. I have Flash CS4.
View 2 Replies
Jul 28, 2009
I have several buttons in a movie and I want to be able to rollover an individual button and play the sound for that button and when I rolloff I want the sound for that button to stop.
View 6 Replies
Jan 31, 2012
Is there any AS3 library or code-snippet that can create altered versions of a Sound object on-the-fly (at runtime)? Either based on:
An existing Sound object; A ByteArray object;
For example, say you have a "dry" sound of a gun-shot. You could:
[Code]...
View 1 Replies
May 21, 2010
I have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. I want to know if my flash header can support the following additional functionality/changes:
1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?
2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.
4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?
I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features. Not sure I can afford help now because of being laid off and two different scammers taking advantage of me. So I'm going to try to do myself and see if there is any suggestions/support on here that can help. I have Flash CS4.
View 4 Replies
Oct 20, 2011
I am using a flash app. I can send and receive streaming data to FMS by using this app, like the chart I attached. [URL] This app uses RTMP to access to FMS. I want to upgrade this app to display sound level of each client. Is it possible by using Actionscript and FMS? If so, which class should I use?
View 3 Replies
Mar 14, 2011
I have a project that requires me to display the waveform for a uploaded sound. The sound is always an MP3, most of the time 22.05 kHz mono, with speech only. The project are written with Flex/ActionScript 3. It's meant to run in the browser, but might also consider converting to AIR if that can help.
All examples I've found and looked at for generating a wave, are either doing some visualization in real time as the sound is playing, or, the most promising, as3soundeditorlib, keeps the wave already generated, but does it very slowly, seemingly using as long time as playing through the audio would've taken.Is there any way to generate the wave faster than real time?
View 2 Replies
May 20, 2011
I am using the following to extract the byte info from a sound object - however if I go back to the same sound object and run this again, The byteArray has no bytes available.
var data:ByteArray = new ByteArray;
sound.extract(data,sound.length*44.1);
data.position = 0;
return data;
Is this the correct behavior? Is there not a way to do this multiple times on the same sound object?
View 3 Replies
Oct 25, 2009
I have some sounds in my library. They are all exported and have been given class names like C, D, E etc. I have another class that represents a button. This class stores a reference to one of the Sound in my library. I set the type for this variable to Sound. When I try to set it I get the error: cannot convert C$ to flash.media.Sound I try as Sound, for example key.note = note_array[p] as Sound; The value ends up as null.
View 2 Replies
Sep 21, 2011
how to add mute sound and unmute sound script in a single button?
View 2 Replies
Jun 28, 2004
I want to attach a sound to the main timeline (rollover sound) that i can call from on(rollover) button events. I will be attaching the same sound to several buttons.
View 1 Replies
May 18, 2007
I use Flash MX 6.0
1) I have a button and when I put cursor over it, it must start looping a sound. When I drag away, the sound must stop. I would be even cooler if it was possible to make the sound fade away when the mouse is rolled away. I have no problem creating another sound file that fades my current sound away.
2) I have a button which represents a knife, that should stab something (a panel) once pressed. So fist the knife must be clean. but after one or more presses, the blood should remain as a movie clip (as I want to animate the dripping blood)
3) once rolled over a button, the sound must start looping (as I wrote in 1.) AND the knife should slowly go backwards (MC). BUT when I roll mouse away, the sound fades away (as in 1. again) PLUS the knife should slowly move back to its place in stead of just jump from one place to another.
View 1 Replies
Nov 11, 2009
I'm having some trouble getting the following code to work - trying to use the new Sound.extract() function to get two seconds of a Sound into a ByteArray, and then create a new bytearray with a WAV header, and then output the file. The resulting 'test.wav' file sounds very wrong although slightly recognisable? I think I may have some of the WAV header settings may be wrong but I'm not quite sure what's the matter and after a long time scratching
[Code]...
View 5 Replies
Jan 14, 2005
Does anyone know of a way to dynamically read the sound levels of a loaded MP3 to help produce dynamic sound visualization in Flash?
View 5 Replies
Jan 21, 2010
How to import sound with AS? Cuz i have tried it and my sound just wount play. Can you explain me where my sound should be and what is the as code for importing cuz i use
mysound = new Sound();
mysound.attachSound("SoundOn");
mysound.start();
and this SoundON from where i get it, i try to add linkage to the sound file but in CS4 i cant find the option;. I do it from the library, adding text into the linkage field but still my sound doesn't want to play?
View 15 Replies
May 21, 2010
I have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. (not sure if I'm able to give a link to it or not on here. If I able to and someone would like to see it let me know)I want to know if my flash header can support the following addionalunctionality/changes:1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features.
View 2 Replies
Nov 21, 2010
I have a long mp3 file hosted on a standard apache server (30 minutes long so far, but I would like it to work with longer sounds too).I'd like to start playback of this audio within at a specified point. When attempting to use Flash Actionscript 3, my basic tests show that ALL the audio from the start to the position I choose is buffered before playback (Sound.bytesLoaded was my friend here). If I start one second in, it takes about 3 seconds to start playback, 30 seconds in, takes about 25 secondsObviously with a really long mp3, like skipping playback to the middle of a 3-hour audiobook, this isn't going to be practical.Here's the ActionScript 3.0 code I'm using:
button.addEventListener(MouseEvent.MOUSE_DOWN, function():void {
var s:Sound = new Sound();
var req:URLRequest = new URLRequest("http://example.com/audio.mp3");
[code].....
View 1 Replies
Mar 15, 2008
I have been at this for about 19 hours straight! I am going to go to bed immediately after this post, but for crying out loud, I have NEVER had this problem before today! Before anyone reads ahead and says 'you have to attach your sound object to a completely separate mc to be able to control it independently from all other sound/root volumes.' see if the following code accomplishes just that:
[Code]...
View 2 Replies
Oct 6, 2011
I have a broadcasting project that I've got where the host of the show can have multiple sound effects they can use on their show.I'm wondering if the only way to go about this is for all the clients listening to the show need to download the mp3 of that sound effect or if the sound effect could come from the host ...like combining his mic (for his voice) but also straight audio (the sound effect) into the stream.
View 1 Replies
Jan 31, 2010
It appears my sound is off sync and the longer I play the movieclip, the farther off sync it goes. Its nothing too complicated, just some basic shooting sounds that fire every time I hit the space bar. My code is below:
package com.objects{
import flash.display.MovieClip;
import flash.media.Sound;
import flash.media.SoundChannel;[code]....
The Attack() method gets called from another class that handles all keyboard controls.when it gets called the sound then plays.firesound and firesound2 are almost the same. firesound2 sounds a little off pitch to make it sound more realistic.At first the sound sounds pretty good, not great. but then it gets terrible as time passes.
I made a new .fla project. and I attached the following class to it by it self. so the following is the only code in the entire .fla project and the issue still occurs. I press the spacebar and the sound starts a day late.
package {
import flash.display.MovieClip;
import flash.events.*;[code]......
View 2 Replies
