Actionscript 3.0 :: Adding Different Output After Hitting A Button?
Jan 26, 2010
I have a simple drag and drop project. I have 2 drag able objects and 4 drop targets for those objects. I also have output text that gives a message depending on what target the objects are drug to (1 and 1, 1 and 2, 1 and 3, 1 and 4, 2 and 1, 2 and 2, 2 and 3, 2 and 4 and so on). I would like to add a button to this project. I want the button to change the output text. So if you had an object on 1 and 2 then hit the button it would read "1b and 2b" and so on, or anything else I want it to say. If you hit the button again it would go back to the original text "1 and 2".
View 1 Replies
Similar Posts:
Jan 21, 2010
Right now I have a drag and drop exercise that will output a value based on the drop positions of 2 points. What I would like is to be able to add a button that basically has a whole new set of outputs based on the same drop positions. Here is an example. If I place an object on drop target 1 and 3. The output says something like "good job". Now if I click a button and place and object on 1 and 3 the output would say "try again". I hope this makes sense. I would also like the ability to add more than one button.
View 2 Replies
May 15, 2009
I'm using mx2004.I have 2 variables, craft and avilablepoints, now when you hit the crafting button, it subtracts 1 point from avilablepoints, and adds 1 to the craft variable. I got that coded without an issue. I'm having trouble setting up the button to stop adding when availablepoints hits zero. Here is the code I have so far...
on(release) {
craft++;
avpoints--;
}
I had more code, but nothing worked for me.
View 2 Replies
Jan 15, 2009
What I would like to have happen is when I click on a button, a movie clip rolls out. When I click on that same button a second time, I want the movie clip to roll back in. Right now it works for me to click on the button once and my movie clip roll out, but when I click on it again, it just rolls out again. Here is what Im working with so far:
import fl.transitions.Tween;
import fl.transitions.easing.*;
var inTween:Tween;
[Code].....
View 2 Replies
Apr 29, 2010
i have managed to create a pswd protected flash animation which is working good when the pswd is given and by clicking the submit btn. What I want is, instead of clicking the btn, i want it work when i hit the enter key.
[Code]..
View 2 Replies
Feb 26, 2012
I'm sure I'll receive some sort of hate for posting this in the wrong area, but I'm really desperate for help and don't feel like searching further for the "correct forum." Anyway, I created a swf for the "education" page for a liquor store, it navigates through wine, beer, and liquor. All the links work well, however after you go to (for example) the liquor page, when you hit the "back button" on the browser, going back to the page with my swf file, the movie freezes after the first animation. I don't understand it, it only happens with firefox, which to my knowledge is one of the more progressive browsers, so what gives?! It even works perfectly on IE and my android phone, so I'm at a complete loss, as I'm more a designer than programmer. Please take a look and offer any obvious advice. I would be willing to make the video in AS3 if that is the only option, I just have no clue how to implement AS3... so confusing. The link to the swf in use is: http://www.whitehorsewine.com/education.php Each book having a button that triggers a movieclip with AS2. The movieclips all have stop(); at the end of them. The rest of the coding is in the timeline on a seperate layer:
[Code]...
View 3 Replies
Aug 19, 2011
When publishing to iOS device the game plays well, when hitting homebutton it disappears as normal, but next time you open it - it starts to play at the state or level it was when quitting - as it only was paused. It should start up from default startupscreen.
ps we had an 103 error that we solved with this: [URL]
View 1 Replies
May 28, 2003
fspaiva just posted a thread with a scale script [URL] attached to a movie is attached this script :
[Code]...
when i try this script and watch the CPU monitor of the computer, after hitting one button this movie keeps eating cycles and a lot of it, meaning after the movie has adapted to it's new set scale, so tried if adding an "if" in the script could stop that :
[Code]...
but that doesn't work, the CPU keeps peaking, so my question is, should i worry about these things? if so what to edit to make that more efficient?
View 14 Replies
Jan 9, 2004
I have a simple flash form, which has some required fields, ie. name, addy, etc. What I want to do, is validate that the fields have been filled before they can hit the "next" button.
View 6 Replies
Jul 21, 2011
Our testing department found that my flash menu sometimes doesnt work after going back to a page by clicking Back button in browser (Firefox).
It happens rarely and randomly, yet still it happens.
i cant see any pattern in its behavior and any reason in it.
[URL]
i've tested this in every way i could think of,
it gets ROLL_OVER event, but not CLICK event.
ive also tested it with hasEventListener and it always has. its just not triggering function.
BUT clicking anywhere on page outside flash makes it work again.
Question: whose fault is this? Flash? Drupal? Firefox? God?
UPDATE: it looks like its caused by <param name="wmode" value="transparent"/>.
Firefox seem to have problem with that.
[URL]
View 3 Replies
Apr 24, 2009
I faced a strange problem today while adding some decimal number in AS3. I have simply adding trace(1.025 + 0.025); statment. It didn't returned proper output i.e. 1.05., instead it has given as 1.0499999999999998.
know the reason behind this. Actually we are calculating some angle and leng in geometric function.And we are getting some diffrence in calculation.
View 3 Replies
Oct 26, 2010
I need from the xml images output in my button, how do this?
View 0 Replies
Oct 29, 2009
I have tried to work my way through it.I can't understand why my button actions are causing an output error,the first two on this keyframe work just fine, but when I add the third it causes this error...
TypeError: Error #1009: Cannot access a property or method of a null object reference.at clear_fla::MainTimeline/frame86()
Here is the script
stop ();
function clickFunction(evt:MouseEvent):void {
gotoAndPlay(87, "Scene 1" );[code]........
Like I said, sg_btn and ak_btn work, but az causes the error...They are all on the same keyframe, dont know if that matters
View 3 Replies
Oct 25, 2010
I need from the xml images output in my button, how do this?
View 4 Replies
Nov 20, 2009
I'm quite new to AS3 (coming from php/c#) and like it very much. My problem: trace doesn't output anything in the Output window anymore?!
View 2 Replies
Nov 20, 2009
I'm quite new to AS3 (coming from php/c#) and like it very much.My problem: trace doesn't output anything in the Output window anymore?!
View 3 Replies
Jan 21, 2010
i have a drag and drop exercise that will output a value based on the drop positions of 2 points. What I would like is to be able to add a button that basically has a whole new set of outputs based on the same drop positions. Here is an example. If I place an object on drop target 1 and 3. The output says something like "good job". Now if I click a button and place and object on 1 and 3 the output would say "try again".
View 4 Replies
Mar 21, 2008
I need a radiobutton to output two numbers in to two different text boxes.Like, if I would to select a sofa(radiobutton_1),it would give me the cost and yardage needed for the fabric. then I would pic an ottoman(radiobutton_2), and it would add the two.right now Im using the data(in parameters) from the button itself to get one number(cost):[code]
View 3 Replies
Dec 10, 2010
I have a button on the main timeline that works fine, part of the code in the button:
for (b=1; b< dpth; b++) {
var lineMovedx = _root["Line"+b]._x;
_root["Line"+b]._x = lineMovedx-9000
trace(_root["Line"+b]);
It basically moves stuff a person draws off the screen when the button is pushed, there is another button that brings it back. But when I put that same button in a movieclip on the main timeline and change the code to this:
for (b=1; b< dpth; b++) {
var lineMovedx = _root._root["Line"+b]._x;
_root._root["Line"+b]._x = lineMovedx-9000
trace(_root._root["Line"+b]);
It no longer works and the trace shows no output, it basically loses it completely, I can't figure out why it does not work, it seems so simple.
View 1 Replies
Mar 7, 2007
I want to display a test in input box to output box on lick of go button script i wrote for this on go button is as follow:
on(release) {
output.text = input_phone.text;
}
View 3 Replies
Jun 1, 2011
i have two text field, textfield1 and textfield2, and a button..
textfield 1 = inputtext
textfield2 = the output.
when i click the button it will save the text in textfield1 into the textfield2.
View 3 Replies
May 20, 2011
How can I call an action(method) when I hover my hand over a button displayed on the camera output screen?
View 1 Replies
Jul 22, 2005
I'm teaching myself ActionScript and the book I'm reading just got into input text capabilities. The book shows me how to link input text to a variable and output that text to the output window using trace. My question is: how can I display the text that the user input onto the actual movie. For example... if I wanted the visitor to type their name into the input text box and click Submit and then a phrase shows up with their name such as "Hold on Name, my site will be done soon." How do I reference that variable and have it actually display in my movie?
View 5 Replies
Jul 17, 2011
I'm running FMS 4 Dev on my win XP SP3 machine, also running flash cs5 professional on same machine. I get the server admin screen to come up and it says it's running. I'm using a tut book on FMS and trying to run the first script in the book. It's long but I'll add the script at the bottom so you can see what i'm doing. In the server app folder I placed another folder called vid2 with nothing in it just like the book told me to do. I wrote the script line for line out of the book. When I test my movie it lays out my video window and buttons. It diplays my ugly mug on the screen. when I press the record button it does nothing. when i press the stop button the output window shows me an error of "#1009 can't access properties or methods of a null object". I assume that this is telling me I do not have a net connection.
when I types in the example it had an IP address in the code.How do I know the correct IP addy to my dev server? If I'm doing development and testing on the same machine do I even need to know this? 2) How will what I'm doing now differ from leasing space from an FMS provider?
the script:
package{ import fl.controls.Button; import fl.controls.TextInput; import flash.display.Sprite; import flash.net.NetConnection; import flash.net.NetStream; import flash.events.NetStatusEvent; import flash.events.MouseEvent; [code].....
View 2 Replies
Jun 21, 2010
well, i want to make an event occurred when object X hits any instance from a certain symbol Y lets say there's 10 instance of symbol Y rather than naming each of the instance obj1, obj2, etc and making a hitTest event for each of the instance, is there a way to make this event occurred when object X hits any instance of the symbol Y?
View 2 Replies
Dec 1, 2011
determine what is preventing my web service from being called. We have a working application in production and the developer who wrote it has left. am trying to build it on my machine and I can see a web service call in fiddler being made with the URL "/Services.asmx/MethodName" (as a GET request).I have set my break point in the asmx web service and it is not being hit. All I get in the flex front end is a pop up with " The remote server failed to respond and may be offline. he web service is in the same application as the web app that hosts the SWF file.I have the cross domain policy file in place.
View 1 Replies
Oct 1, 2009
(I figured out the TAB ordering )UT the contact form sends email out even if not all the fields are filled in. I need to change it so that it will only proceed if all fields are filled in.This is what I have right now:
on (release) {
// send variables in form movieclip (the textfields
View 1 Replies
Jun 22, 2006
var nextY = 0;
var nextY2 = 18;
for (var count = 0; count < result_lv.typeCount; count++)
{
[code]....
The type count is correct but the information for the project is wrong.
View 1 Replies
Jan 11, 2008
How would I make the code for movieclips of the same color to detect when 4 or more of the same color movieclips are touching either horizontaly or verticaly to make the MC disappear. When "MC_bluepiece" is ontop of 3 other "MC_bluepiece" then all 4 movieclips disappear and give the player points.
View 2 Replies
May 14, 2008
i have a character, (pawel) this one hits on a set of tree coins (mccorrecto) in this point i have the answer, the problem is... when pawel hits mccorrecto in other part of the movie, most apear tree numbers (280, 340, 460) = i have to do an excercise with number of secuences = so i have this script
for mi coin (mccorrecto)
onClipEvent (enterFrame) {
if (this.hitTest(_root.pawel)) {
[code]....
View 3 Replies
