Lets make it simple. Lets say I have the stage with a combo box. I will have 100 frames with the combo box tweening from position to another. I easily can do it and see the animation of the combobox over the timeline. But when I create the swf file, the animation doesn't work. This also happens to all the other components. They don't accept any type of animation except if they are embeded in another movie clip.
View 6 RepliesI downloaded Creative Suite 5.0 Web Premium so I could built be an banner animation for my web site. There are three programs included in the suite, Flash Builder, Flash Catalyst and Flash Professional. Which one do I use to built and animation or do I need to use them all ?
View 3 RepliesFLVPlayBack asks a link for it's skin. How can I bult-in skin in project, so I will have only one swf in result?
View 1 RepliesI'm new to Flex/AS3. I've attached an example line chart below. I want to know if this type of graph can be created using the standard line-series chart available in Flex (Flash Builder 4.6), or whether there's something drawn below that is non-standard and would therefore require some rather involved customization. The key features are:
-Different line styles and colors (dashed, dot-dash, solid, thick, thin, opacity)
-Placement of units (y-axis "seconds" and x-axis "Hz")
-x-axis zoom/pan control bar below graph (move knobs in and out to set x-axis min and max plotted values)
-Log x-axis scale, linear y-axis scale
-Data Tip (or, some call it tool tip, not shown below)
-SI units for x- and y-axis tick labels.
My guess is that everything should be pretty standard to accomplish using Adobe's built-in charting (with the possible exception of item 6, see below). Is that a good assumption?I'm particularly concerned about the x- and y-axis tick labels (item 6). For example, the x-axis tick marks as a number would be:1, 10, 100, 1000, 10000, 100000, 1000000, 10000000 but they need to be replaced with SI units, where k=1000, and M=1000000, so the corresponding marks would be (replacing the numbers above with the strings below)"1", "10", "100", "1k", "10k", "1M", "10M".The same goes for the y-axis, where p represents 1e-12, and n represents 1e-9.I can create an algorithm that accepts a number and outputs a string to do the SI unit conversion. But given that, is there a way to easily manage the tick mark labels to replace the default numbers with such strings?
how to go about getting the Flash Player(s) that's built into the CS5 IDE updated? According to System.capabilities.version, it's running v10.1.52.14 which, according to this page on the Adobe site, says was a pre-release version of Flash Player and should not be used! It also seems to have an annoying bug where HTML tags are frequently shown as raw HTML, rather than being rendered, which makes testing stuff in the IDE a real pain.
View 12 Replieshas anyone made a Custom Skin for a TileList component in Flash CS5. I want to change the scrollbar of the TileList, i want the track bar as just a thin white line and the thumb a orange circle, this for a Touch Interface.
View 1 RepliesI have a shopping cart/store built in flash. All the pages are built in html. My problem is that when you navigate to another page the shopping cart empties. The cart is .xml based. I didn't think of this at the beggining. Does anyone have a suggestion? The link to the site is below.
View 2 RepliesI'm having a hard time finding information on the best way to deliver video to mobile apps built in Flash CS5.5.
I'm working on an iPad app using AIR for iOS and I'm wondering how I call on video files basic controls.
The app I'm working on is just a mobile presentation for our studio's production work, so I just want to be able to add our showreel and some other videos of work we've done.
I'm aware of the fact the iPad doesn't support flash so I'm trying to figure out how I can detect an ipad visiting my site and provide an alternate html header. I'm sure there must be some code snipit I can add to my site but have not been able to find something.
View 2 RepliesFlash CS5 UIcomponent code hint not come in built in actionscript editor
View 1 RepliesI'm working with a fellow coder on a project; he's the Flex guy and I'm the Flash guy. He supplied me with a custom Component he built in Flex, to act as an API. It's working just fine for him when he runs it in Flex.
I installed the .swc file in my Components folder. When I open my Components window, I can see it sitting right there. However, I can't seem to drag an instance of it onto the Stage. It highlights in the window when I click it, as I drag it I can see the little dotted-outline box indicating that something's being dragged, but when I release it it disappears. Nothing on the Stage, nothing in the Library.
It seems that the code of flash's classes under enFirst RunClassesFP9flash are not complete but merely prototype declarations. Where is the actual or working code and why are they not using package { } keywords? Instead they declare classes using the intrinsic class keywords. What is intrinsic and why would i want to have intrinsic classes? Can i also make intrinsic classes? Why are some classes under "fl" like import fl.transitions.Tween; and others are under "flash" like flash.display.MovieClip.
Additional: The classes in enFirst RunClassesFP8flash are not complete... Where are the other classes like flash.display.MovieClip located? I only see BitmapData under display. There must be another "flash" folder not under FP8 and FP9 but i can't find it with a simple search. Also enConfigurationActionScript 3.0Classesfl is incomplete i think. Is the organization of files bad? Some imports are with "fl" others are with "flash"
I have a certain set of motion twains that I've successfuly completed, they constantly loop right now (default), and is saved in the SWF file.I'd like to take that finished looping animation, and insert it within another animation (a) that can be played with a play button, and stopped/resetted with a stop button.How do I insert the completed looping animation into the main animation? And is there something special I have to do in the actionscript of the start and stop buttons so that the "inner" looping animation will start and stop with the "outer" main animation?
View 1 RepliesI am trying to understand event propagation in Flex framework and have a following doubt on it:
Scenario: I have a built-in component DropDownList on change of which I want to create a custom event refreshPreview and want to propagate it to a custom component PictureComponent.
In the custom component's mxml, I have added the Metadata directive as follows to register a refreshPreview event with the compiler
<fx:Metadata>
[Event(name="refreshPreview", type="flash.events.Event")]
</fx:Metadata>
Layout Details: In my main mxml application I have laid out DropDownList and the custom component such that both are siblings (i.e. have a common indirect parent)
e.g.
<s:Group id="contentGroup">
<s:Group id="formGroup">
<s:Form x="11"
[Code]....
I am seeing that the refreshPreview event is not getting propagated to the custom component.
I doubt this is because the built-in component is a sibling of the target (where the event got generated) and not a parent. how to make refreshPreview event propagate to custom component?
I have a simple Flash animation of an object spinning around it's centre with no x, y movement nor scaling.
It plays fine in Flash but when I convert the symbol to a Flex component and instantiate it in mxml, the animation scales up and down as it spins.
This Message Used To Be Entitled:"Can't make music on/off button work for my movie built in CS5..."But after literally WEEKS of being on this forum (& desperately seeking the answer in numerous ways) do you mean to tell me there is ABSOLUTELY NO ONE ON THIS FORUM that knows how to make a music/sound button work correctly? [code]Perhaps it's a simple adjustment,.
View 11 RepliesI need a very special component written in ActionScript 3. It is a rectangle filled with a bitmap. The bitmap is loaded from an external URL based on some programmed rules. The textured rectangle is then animated using Flash CS. Animation is performed using rotate/translate/scale/skew tools. How to create such a component and add it to Flash CS library?
View 1 Repliesok lets say you create a button that when held down play an animation of 20 frames if realsed it goes to frame one and stops if held down it plays out this animation. for the topic lets say you have a fire animation and you want the fire to apear and if the user hold its down the animation reaches the end of the time line and loops back and plays the last 5 frames of the animation and as soon as it is let go it goes to and stops at frame one. Well i know how to make a button that when held down plays out an animation. And i know how to say when released goes to and stops at frame one. What i dont know how to do is to loop the fire at the last 5 or 6 frames so the user can hold it down all day long and play out that animation.
View 1 RepliesOn a horizontal bar, text scrolls from left to right, continuously. The text is a fixed string of city names, and I've made it so that it loops nicely. This horizontal bar with scrolling text is part of a vertical animation, scrolling the bar in and out of view. The vertical tween starts after two seconds. When the vertical tween starts, the horizontal animation has started as well. At the beginning and end of the vertical tween, the horizontal tween starts over. I want it to continu.
View 1 RepliesIs FarmVille on the iOS built with Flash? And if so, how can you tell? Are there certain flags that exist in the form of certain files or magic numbers within the .app folder hierarchy?
View 3 RepliesI have to say that the 3D animation in Flash is pretty cool.It's great for simple 3D renderings.However, I'm looking for something more in-depth that my company can use.Coding is not my speciality, though.I like being able to create images on the screen, not put in code.suggest the best software out there that's fairly easy to use?
View 4 RepliesI did a xml image gallery, with buttons for each image (using the duplicateMovieClip function + a for loop).Now i went to next step, I need to make a scroll for the menu, BUT, i don't have any idea how to set something to happen after the for loop is done.
My code so far:
Code:
stop();
var yPos = -10;
var depthCount = 1;
[code]....
Just for a simple test (since i noticed what i tried wasn't working well), I added a test movie clip and added a _visibile = false to be executed, i added it right after the closing of the for loop. I didn't had sucess thou, it happened before the loop .
I'm currently working on converting an Android app I built natively as an iPhone app. I'm recreating it in Flash as I know AS3 but not Objective C. My original Android app is localized for 4 different languages (it's so easy to do with Android!) - and my question is - how would I do this for the iOS version from Flash? Would I be able to use separate XML files with all the strings in each language and load them in after somehow detecting which language the user's device is set to?I ended up using the following code:
var languageSettings:Array = Capabilities.languages;
var locale:String = languageSettings[0].toString().toLowerCase();
This gave me a 2-letter language code: 'en' for English, 'de' for German, etc. which I was able to use to load the correct xml file for each language.
I need to do a good animation for school to pass my subject and I have done several animations. I thought maybe I do an animation with different choices. Basically you have the "Home" Screen and then you chose one and an animation is been played. Then when I press another button, a different animations is being played.
View 3 RepliesI am building a Dutch website where people can search for availble houses tot rent. The website is completly free for every one. But to make some money I have added the possiblity for house owners to put there website in the spotlight in Dutch "uitgelicht" (see : http:[url].....). Now I have the following problem. Not every browser shows it in the correct way and I wanted to change the banner in to a flash banner. So I started out in flash to create a "image belt" like this. But now I want to insert some images from a database and I am stuck.
The Question : Where and how do I tell Flash to insert images from a db. I know PHP but I don't know where to start looking.
I built a Flash animation which keeps looping. I am trying to get it to not loop at all and it refuses.
Here is the code of the html page, as created by Flash CS5:
[Code]....
value is set to false above, also in Flash my publish settings are set to not loop.
Is it possible to use 3D objects created in 3D Max, Blendor, iClone etc. to perform animation to make Flash Movie more realistic? Can I make nice animations like in iClone 4 Software? If it is possible to use 3D Objects in Flash
View 2 RepliesThe site is up at [URL]
It is a horizontal layout and when you click on certain buttons it side scrolls to that specific area. The buttons don't execute the actionscript that I need them to not to mention that some images are missing.
Also, are there any bulk packaging publisher settings like InDesign has? I think there may be a problem in the location of some files and I think Flash may not be locating them properly.
I'm learning flash animation and am wondering once I save the flash file to a dvd format, how does the end-user navigate when they put the dvd into their TV? Do I need to design and incorporate a menu for the end-user? If so, how does the TV remote control navigate through this menu that was created on a Mac computer?
View 2 RepliesYou know how adobe promised us physics in flash?URL...If you've been wondering why they left it out, turns out they didn't.URL...
View 4 Replies