There are a lot of topics about this, but I've been searching and trying for two straight days now and I can't find an solution. The terminal doesn't give me any error (codesign -vvvv):
[Code]...
I've tried deleting certificates, provisions over and over. I've tried to export only the key, only the certificate and both of them. I extract the .ipa and compress it into an zip. I've tried everything but it doesn't seem to work.
I have found some question which refers to my initial question :on xcode Usually resolved in synthesis by :
flushing certificate cache correcting the signing certificate ( using Distribution in replacement of Developper) C checking and correcting the Application ID who was sometimes not the same between the one declared in iTunes Connect and the one in the app.xml file
The fact is that I still has the problem on Flex Builder, which is when I upload my application, it failed with "Application failed codesign verification"
[Code]...
So the question is what could still block the uploading of the application on the App Store?
How to resolve "Application failed codesign verification." when uploading Application, build with Flash Builder 4.6?
when i use flash cs5 publish the app for ios,It works fine.But when i upload the package to the app store,application loader popup message: "Application failed codesign verification.The signature was invalid,or it was not signed with an Apple submission certificate."I create the certificate file from mac.
I am going to develop an application which will be cross platform and it will be released for IOS and Android. My App will be using network connectivity and communicate with the server and it has to be fast, reliable and responsive. So my Question is: If i choose Adobe Flex to build that app for IOS and Android, So will there be any performance issues? If no then why people use xcode or android sdk? What are the disadvantages of using Adobe Flex over xCode and Andoid SDK?
I have two servers running FMS 4 (exacyly the same version). On one server, when i add a swf in the folder application/vod/SWFs, the swf is "added" 5 minutes later as authorized swf, according to the UpdateInterval config value. On the other i have to restart the server. I checked every config file of both server, they are exactly the same (except few values depending on the servers themselves, of course, like IP, host, etc...).Anyone has an idea on what could be the problem on the first server? This is very annoying since a restart disconnects all my customers!
We have developed a magazine reader which is basically PHP application. Admin panel is built in PHP but when any user wants to read a particular magazine, it is handled by Flash i.e. we are embedding the .swf object with HTML in PHP page. But flash is not supported in iPad/iPhone. So we want to create this application in Xcode so that user can read the magazine in iPhone/iPad also. There is confusion how it can be accomplished.
I am thinking of starting an ambitious project of writing some type of converter to convert the new Flash CS5 XFL format to some type of iOS readable format for building pages. A lot of what I do convert old Flash course over to native applications. They are usually very simple with some basic animations. Some are more complicated than others, obviously.
1) I recently found the XFL format and was wondering if anyone was doing this type of conversion?
2) Has adobe published this file specs yet? I haven't been able to find them, yet.
3) Is this even possible? Has anyone tried and been unsuccessful or would like to work together on this?
I have a Flex and Java application and i am using BlazeDS between flex and java. Generally my application works fine. I observed when ever i try fetch data little faster(not giving gap between two fetch commands) then i am getting the error "Server error :faultCode:Channel.Call.Failed faultString:'error' faultDetail:'NetConnection.Call.Failed: HTTP: Failed'"
I guess when ever load is increasing on BlazeDs, i am getting the error. I am calling the java service using following code
Say I have a flash movie in an HTML page, I want to get the value of a tag in the HTML page (for example, google-site-verification content value). How could this be done?
*UPDATE - I want to embed a flash template into an html web page, in this web page will be a meta tag with a UID. The UID will be referenced in an XML schema, which Flash loads the specifics of the UID to flash file. The web page name can be anything (index.html, index.php, contact.asp, etc).
I'm running Flash CS4 on a MAC Pro. Flash has been driving been crashing a lot in the last week so I clicked the Adobe updates button from within Flash. Every time I try to run the Flash update it gives me this message."adobe cs1 cs4 1.0.1 failed to install".Any ideas? I have already rebooted, cleaned out my library cache files, check my disk permissions and verified my disk.
Is there a way to force Xcode to recognize .as (ActionScript 3) files as source code? If I right click the file in the files and folders side bar I can only "Open As.." Preview or Hex. If I rename the file extension to something Xcode knows (.m), Xcode allows editing.
I'm instructed to develop a project in such a way that it is available for iOS, Android and Blackberry OS platform all at once. A herculean task!! indeed... I am searching for all the possible development platforms for this assignment. I came across Flex 4.5.1 and the initial thoughts are really positive. Somewhere in SO I read that flex applications suffer from code bloating problem. I dont want such solution; infact memory is an important concern for me. I want to know which one of the following is the optimum approach:
Developing using OS specific SDK i.e. xCode for iPhone, Andriod SDK for Android.
Developing using Flex builder and ignore code bloating.
Using Flash Builder and developing application in ActionScript.
We are streaming live events encoding using H.264, so therefore we have to save the file as a .f4v. However, whenever I try to play the file, I keep getting a "playback failed" in Adobe Media Player. What could I be missing? Is there anything else I need to do in Flash Media Live Encoder?
create an age verification page but I don't really have the AS knowledge to finish it up.
Problems:
I don't know how to link the text to the appropriate website when they are verified. EX: "You may enter" linking to the site. "You are not of age" linking to disney.com or something.
Also, when there are no digits entered, it verifies the user of age.
I'm creating a keypad which uses buttons to enter numbers into an input textfield.I can get the buttons to enter numbers into the field but can't figure out how it knows the code is correct.I've attached the fla to explain what I mean.Code used so far:
Does anyone know how to allow fmscheck with swf verification enabled. I don't want to create an application just for fmscheck as I want to check my application (with swf verification enabled) is still up and working.
I want to implement Adobe Media Gallery (source available on Adobe's website) in a fully-flash website. I think the best way is to keep it as a seperate swf. I can get my parent movie (flash website) to "loadMovie(ADOBEmediaGallery.swf)" just fine, but what I would like to do is incorperate a LOGIN (username/password) into media-gallery.fla BEFORE it loads.
I can make the text boxes/button, etc, but I need a little help with the actionscript/PHP/mySQL. I've found some older tutorials on that, but I don't know how to make the ADOBEmediaGallery.fla WAIT for the Login Verification BEFORE loading...
is it possible to activate SWF verification also without streaming any video or audio? I'm just interested to use FMS to secure my flash application but I don't need to stream any media files.
I'm having a hard time getting my virtual pinpad to output to the input text field. In the zip there's a safe, in order to open the safe you must get the right combo...the issue I'm having is i don't even know where to start with the code. I want to be able to push one of the buttons and have it output to the text field...and if the combo is right which in this case is going to be "23012" i want it to go to and stop at frame 2...and if its wrong i want it to start over.
The green button should be the enter button. and i want the red button to be the clear all button.
I have a flash and php based mail form that needs to have the fields verified. So when a user does not insert info in the text fields, an error clip will play. The form works fine without the verification of fields, but I want to prevent from receiving blank emails. The form is created in 2 parts or tutorials since I'm trying to add field verification or error message. Here are the links of the tutorials. [URL] and the next link is for the field verification. [URL]. I'm using CS3 with AS1 and 2. Here is my original AS without the verification.
Code: Select allstop(); var senderLoad:LoadVars = new LoadVars(); var receiveLoad:LoadVars = new LoadVars(); submit2.onRelease = function() senderLoad.name2 = name2.text; [Code].....
I'm building an array of JPEG files from an XML file. I need a way to verify that the file exists on the server as it build the array. If it's not there I want to substitute another file name in it's place: default.jpg. Using loadVars I came up with this code.... which won't work:
[Code]...
I posted this on the FLASH forum but the only answer I got was that it can't be done and I should use a server-side script. Flash should be able to tell if a load failed or not..yes.
If I place an set of FMS servers behind some reverse proxy caches, will I get problem with SWF verification if the cache layer caches the .f4m meta data file with the SWF verification data? Is there any documented best practice on the requirements to build large scale deployment with security enabled?
I'm completely new to programming in PHP. I finally got the Flash/ PHP mailer working as demonstrated on this site ([URL]). Now I'm just trying to figure out how to block out blank forms... and possibly do email verification.
I want to make a code verification form. Those forms that generate an image which you have to read and type down the code in it. I want to have AS generate a random set of letters and numbers in an unselectable textField. That will be the generated bitmap (not a bitmap actually, but... ). I also want that randomly generated set of letters and numbers to be written down in a variable so that I can compare the variable with the input field of the user to test if it is ok. How to randomly generate that?
In my machine I have installed only Adobe Flash CS5 proffesional trial version. Now this installation is not supporting adobe.utils.Extension class in this version. I have tried with all latest updates from adobe site. My doubt is does adobe.utils.Extension class is available in licensed version of Adobe Flash CS5 proffesional?
I want to create a simple game (Adobe Air) based on 2 players using ActionScript 3.Let's assume I want to create online chess game.So that I can play with my friend at work, at home, from anywhere via internet.Should I use flash server? Or something similar for this purpose, or there is simpler way to connect 2 players and make fully functional interaction between them?
The flash CS4 10.0.2 update fails to install no matter how many times I try or restart my machine.A flash media encoder update and a flash lite update also fail.
Try to display the xml data on the flash via the dynamic text. During the loop, only the last childnode nodevalue is display on the flash.Do a trace on all childnodes, it was success but flash keep showing the last childnode nodevalue only. Did i miss out any AS2 command.
