I have a Flex application that loads some data from the database. During this I want my custom preloader stay visible. When I postpone the dispatchEvent( new Event(Event.COMPLETE)) in the FlexEvent.INIT_COMPLETE handler, the loading will never happen because the next frame is not entered. How can I keep the loader running until all the data is fully loaded?
View 1 Replies
I have been looking for a way to show a preloader before the external SWF file loaded but unfortunately I had no luck as of yet!!I have a button that loads a few external files in some empty MCs. I just want to show a small preloader before the external SWF files loaded?
View 1 Repliesi try to implement a preloader for my site but i have the following problems:once the preloader is finished it opens my external swf but this one appears below the preloader and very little in the window (almost smaller than my preloader size)
package classes
{
import flash.display.MovieClip;
[code].....
I have a preloader.swf that loads another swf (main.swf). It all works fine, however I would like the loading bar to stay on 100 (once it gets there) for 2-3 seconds before the main.swf opens, currently as expected from the code below, as soon as it gets to 100% it flicks straight over to the main.swf.
I am using tweener, and I could achieve this easily using the onComplete code to call this.addChild(loader);, however, the problem is, both my preloader and my main swf are liquid layouts, and if I were to call the this.addChild(loader); at the end in its own function, then it throws a
TypeError: Error #1009: Cannot access a property or method of a null object reference.
. The only way to get around this error is to put the this.addChild(loader); so that it loads upfront. After a bit of google research, i found this error occurs due to the stage properties already been set in the preloader.swf (from liquid layout)then once the main.swf loads it tries to set them again...So is there another way i can cause a delay for 2-3 seconds once my preloader hits 100?
Below is my preloader code with liquid layout settings
Code:
//LIQUID LAYOUT
stage.align=StageAlign.TOP_LEFT;
stage.scaleMode=StageScaleMode.NO_SCALE;
stage.addEventListener(Event.RESIZE, resizeHandlerLoading);
[Code]....
1. using my tweener onComplete method and fixing the error caused by preexisting stage properties
2. Thinking of an alternate way to delay the main.swf from opening straight away (keeping in mind that this.addChild(loader); would need to stay where it is...
PS - here is a link to a person who was getting the #1009 error with preloader and liquid layout, their solution works, but won't allow me to use a tweener delay...[URL]
I am currently working with Flex 4. I successfully use custom preloader by s:application ... preloader="path"..., but i want the preloader to load external file as well, can it do that? How can i call the variables in the preloader?
View 1 RepliesI want to create a preloader (in flash)(with the "percent-loaded"-thingie) for an external .html file that I want to load. Here's my code:
[Code].....
On the "main" frame" I've put a getURL action on a movieclip. Can this work.???? I'm still new at this and a bit confused?
I have my main menu movieclip placed on the main stages and I use it to load some external swfs. However when I load them, the menu disappears because it is covered by the loaded swf. How can I set the depth of my top menu so that will always be visible when the external swfs are loaded? Should the depth be set on the main time line or inside the main manu movie clip? This is the code in my main menu that I am using to load the swfs but my main menu is a movie clip placed on the main timeline...
Code:
var swf:MovieClip;
var loader:Loader = new Loader();
var defaultSWF:URLRequest = new URLRequest("swfs/welcome.swf");
loader.load(defaultSWF);
stage.addChild(loader);
[Code] .....
I am a bit stuck here for the past few days. I have a SWF running in Security.LOCAL_TRUSTED sandbox. I can load my JPEGs and simple SWFs without any problems
[Code]....
I have my main movie, and from there an external movie is loaded which has a scrollpane on it. Problem is the preloader will not show when the external swf is loaded...when the button is clicked, nothing happens for about 3 seconds and then eventually the scrollpane comes up. I have the preloader on Scene 2, and it works for all my other external swfs so I know its the scrollpane issue.[code]I have tried have the "export to first" frame linkage thing but that doesnt work... does anyone know how best to do this?
View 2 RepliesI'm hoping to implement a preloader on a main.swf that measures the bytes etc loaded in an external.swf. My two concerns are that 1) this just isn't possible? 2) I can't have multiple preloaders on the main.swf, which I would if I used one for the external .swf. I intend to try and explain this in the best way I can what I have done so far, as I personally feel this is quite a complex task.
Here's the basics:
I have an external .swf file, being loaded, using the following Action Script (3), in what I shall call, main.swf:
//---loader---
var swfLoader:Loader = new Loader();
addChild(swfLoader);
var swfURL:URLRequest = new URLRequest("nameofswftobeloaded.swf");
swfLoader.load(swfURL);
function loadHandler (event:Event){
var thumbsPanel:MovieClip = event.target.content;
addChild(thumbsPanel);
This works fine. The Action Script I use after this simply allows me to control the external .swf from the main .swf so isn't necessary.. I finish the loader, with this:
"swfLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, loadHandler);"
So, this all works fine. However, as the external .swf contains images, it doesn't load instantly. I therefore need some kind of preloader to show how much of the external .swf is loaded. However, I tried placing this in the external .swf itself and it failed miserably - for some reason it basically didn't preload and the completed phase of the preloader just appeared.
I have followed the tutorial on gotoandlearn that builds a preloader swf to load an external swf. The problem I am having on the main timeline is that I now cannot access a function in the final external loaded swf. This worked fine when I just loaded the external swf into the main timeline but with the preloader I think I have my loader instances confused and I don't know how to fix it.
[Code]...
Like I said this worked perfectly before I tried cleaning things up with intermediate preloader swf and now its all gone pete tong (again!!) When testing this by reviewing the main timeline it cannot recognise the function killStream
this is my final bug then I can finally launch this bloody site. here's my problem, I am loading an external .swf, which contains a pre-loader. the preloader in the external .swf works fine when I test it online by itself (not being loaded via main.swf) But when I test the external.swf through the main.swf the preloader does not work. the external.swf just plays through like it does not recognize the stop in the first frame to initialize the preloader skipping it altogether.here is my code:
[Code]...
I'm creating a flash 3d website for a company. The idea is that there is one overall swf file - this holds the navigation and design. Once the user clicks on a button, it goes to frame 10, I have included the following script to load a swf file
loadMovie("deepbartesting.swf", maincontent);
this.onEnterFrame=function(){
if(movieClipName._currentframe==5){
[Code]....
the preloader works, but instead of going to frame 2 of that swf file, it goes to frame 2 of the overall swf that holds the navigation. Does anyone know how to get around this so that it goes to frame 2 in the same swf file as the preloader?
I have a FLash project with a preloader, but the preloader doesnt appear until 70% of the file has loaded, which is useless of course... is there anyway of loading up and displaying the Movie Clip contaning the main graphic Preloader so it doesnt appear too late?
View 3 RepliesI have created a fla document named main.fla I have defined the document class as Main which is attached. (rename to Main.as)
The problem is preloader shows only when the file is completely loaded. How can I appear the progress preloader for the main file.
Add Preloader to MovieClip that loops until ALL movie clips in file are loaded? Is this possible?!
View 3 RepliesI'm creating a movie with heavy animation and audio in Flash CS4. I have a preloader that I purchased from flash den.com and I believe it's pre set to begin the movie when the total file is done loading. But I want the movie to begin when half the total .swf file is loaded. Here is my code on frame 1
FRAME 1:
var amountLoaded:Number = _root.getBytesLoaded()/_root.getBytesTotal();
preloader._width = amountLoaded * 250;
loadText.text = Math.round(amountLoaded * 100) + "%";
[code]...
So I am having a problem with the flash file at this site: [URL]
Everything is working fine, except for the preloader, which only seems to load after the entire file is 100% loaded, which leaves people who visit the site staring at a black screen for quite some time... The code on the preloader frames is as follows:
frame 1 (which has the background for the preloader/ actual load bar etc}
var percent:Number = Math.floor(getBytesLoaded()/ getBytesTotal()*100);
textBox.text = percent + "%";
textBox._alpha = 80;
[Code]....
Also, if you want to check out the actual program just click when you get to the main screen and click to create new shape (mouse x and y change opacity and speed respectivly) I'm using actionscript 2
Question! Whats the best way to have a preloader for loading an external swf file.I wrote this for the actual operation of the button
function btnClick(event:MouseEvent):void
{
removeChild(loader);[code]..........
I'm working on a project that requires a swf file to have a built in preloader. In the past, puting a preloader in caused problems, because the preloader, wouldn't load until about 90% of the swf had allready loaded. Is there a way to tell flash to load a particular frame first? Or perhaps stream itself?
View 3 RepliesI'm trying to wrap my head around AS3 and it isn't going well. I'm getting stuck on the most basic of problems it's making me pretty angry. I'm trying to do something as simple as reference the stage and I just can't figure it out; something that usually takes me seconds has eaten up 2 days of my time.
I have a Main.fla that outputs Main.swf; it contains no script, only library assets. I have a document class set up using Main.as, which itself has 1 trace and code to run the Preloader class, which is held in Preloader.as.
[Code]...
I have a preloader that loads an external .swf file. Preloader works fine, technically the external .swf loads fine, but the external .swf is scaled up so you can only see about 2/3 of the screen. I made the stage for the preloader the same size as the stage for the external swf. I used the HTML for the swf that gets loaded, and just changed the file name to that of my loader.
View 4 RepliesI used the CS5 Flash templates>sample files>preloader for external file, to create my preloader.The problem is that when the preloader is done and my SWF is loaded, my SWF has already started playing.It is an animation that builds for 200 frames then buttons appear.By the time the SWF appears it has already gotten to the button frame.Depending on connection speed I have caught the animation building.
Here is the preloader action:
var contentLoader:Loader; loadContent("stage002.swf"); function loadContent(url:String):void { contentLoader = new Loader();
[code].....
Basically, I adapted the design totally, but chose to display a percentage along with the animated "loading..." thing there.
One difference is that my buttons are located in the Transition movie clip and the loadText dynamic text field(where the percentage is displayed) is also in the Transition movie clip.
Here's the code I attached to Content movie clip:
onClipEvent (enterFrame) {
bytes_loaded = Math.round(this.getBytesLoaded());
bytes_total = Math.round(this.getBytesTotal());
[Code].....
If you visit [URL] you'll see the busted result.
For a deeper look the fla is downloadable at: [URL]
I am building a peloader which loads an external file. Simulate donwload has never really worked for me, it just flashes and shows my loader at 100%. Does anyone have any tips to actually get this working?I have flash cs3, publishing to FP9 and using a simple LOAD_COMPLETE, onProgress function.
View 6 RepliesAnybody finished Claudio's preloader tutorial?? Great tutorial... preloader works fine for me. However, I tried tweaking it a bit and cant get a part to work. Maybe someone can suggest a fix. I'm pretty sure its a simple thing I'm not seeing. Basically, I adapted the design totally, but chose to display a percentage along with the animated "loading..." thing there. One difference is that my buttons are located in the Transition movie clip and the loadText dynamic text field(where the percentage is displayed) is also in the Transition movie clip.
[code]...
[url]
I have a preloader using this script:
[Code]....
I want a mask to go over some words in relation to the percentage of the file loaded. Below it I want text that says 1%, 2%, 3%, etc. (also in relation to the percentage loaded). But when I test it and click "simulate download," the screen stays white for about 10 seconds then goes to frame 2 where my content starts.?! I get no errors, either. PS: on Flash CS5, is TLF text the same as Dynamic? For "percentage," the only two options are Classic and TLF...
I have my preloader loading my main swf where I'm loading another swf that contains a background.
When my preloader is done it shows my main swf but it takes a while after that for the background to load.
Whats the easiest way to get my preloader to wait until the background swf is done loading?
How can I replace text loaded from an external file with text from another external file? Using setInterval and calling the .load from a function or something? In the example below I'm calling an external text file, could this also work with an .xml file with cycling through the children?
[Code]...
I have my preloader which seems to be working correctly, however it only becomes visible as around 80%. So the page is blank up until then, then after that the loading bar is finishing and then goes to the rest of the site.
View 11 Replies
