IDE :: Any Way To Limit FPS Of MovieClip To Stay Same?

Mar 26, 2009

I have a swf that I created in Flash CS4 that includes a movieclip. Because I only have a small number of frames for the movieclip I have set it to 6fps so that it runs at the right speed. When I publish and then load the swf the movieclip runs at the right framerate. However, I am actually using these swf files in an actionscript project that loads them up and displays them. When I do that with this swf the fps on the movieclip seems to have reverted to 24fps and is running way too fast. Is there some way to limit the movie clip fps so that it stays the same when I load it in actionscript, or is there any reason why the fps should be reverting? Ideally I would like to have different fps for different elements within my swf - is that possible?

View 6 Replies


Similar Posts:


IDE :: Movieclip Making It Stay On Hit Frame?

Aug 25, 2010

Im trying to make these movie clips stay on the hit state when the user clicks. Can someone help me out? This is what I have so far.

View 1 Replies

Professional :: Stay On Frame Until Movieclip Has Finished?

Feb 18, 2012

So basically i'm trying to allow the movieclip to play and once its played move onto the next frame.
 
I'm using Actionscript 3.0. and the movie clips around 6-7 seconds long.

View 1 Replies

ActionScript 2.0 :: MovieClip Button Stay Down When Clicked

May 21, 2007

Ok, I've search through the forums but none of the posts seem to work for me. I've got 4 buttons that each have an onRollOver, onRollOut, and onRelease function on them. I would like the onRollOver state to stay in place after the user clicks the button they're over. Then, when the user clicks on a different button, that buttons down state sticks, and the previous button's state unsticks and goes to the rollout function. I've read through and tried this thread:[URL]

View 5 Replies

ActionScript 2.0 :: Floating MovieClip That Stay Roughly At Same Spot

Aug 5, 2009

I'd like to make a movie clip float about, but stay in roughly the same spot? I'd imagine a simple bit of AS inside an onClipEvent (enterFrame) would work.

View 0 Replies

ActionScript 2.0 :: MovieClip To Stay At Bottom Of Frame Until MouseOver?

Sep 30, 2007

I created a movieclip that follows the mouse up and down with easing, using this code:

onClipEvent (load) {
_y = 400;
speed = 5;
} onClipEvent (enterFrame) {
endY = _root._ymouse;
_y += (endY-_y)/speed;
}

What happens is that when I load the page the movieclip goes to where the mouse is right away, before I even put the mouse over the frame. How do I get the movieclip to stay at the bottom of the frame until I move the mouse over it?

View 7 Replies

ActionScript 2.0 :: Series Of MovieClip Buttons - Stay Downstate When Clicked?

Aug 27, 2009

I'm using some classes that apply to a series of movieclip buttons I found. I'm using the classes to get the buttons to rollover and when clicked stay in the down state, when another is clicked the previous button goes back to up state. The rollover works fine however it doesn't stay in down state when clicked.

Here is the code I have so far, I'm also open for substitute classes that will do the same thing.
ActionScript Code:
class ButtonClass extends MovieClip {
public var onPressDown:Function;
public function ButtonClass() {
this.gotoAndStop(1);
[Code] .....

View 0 Replies

AS3 :: Flash - Set Boundary Limit For MovieClip?

Sep 22, 2010

I have a MovieClip that can move up, down, left and right. If the MovieClip hits a wall, the MC bounces, and should not move past the wall--but if you continue to press either your up, down, left or right key, and don't let go--the MovieClip will go past the wall. I'm trying to figure out a way, to stop that from happening.link of movement

// function hitWall --------------------------------------------------------------
function hitWall(event:Event):void {
if (box.hitTestObject(wall)) {

[code].....

View 2 Replies

ActionScript 3.0 :: Removing MovieClip Buttons - GALLERY Button To Stay On The Stage At All Times

Sep 24, 2009

I have 5 movieClip buttons. I want the GALLERY button to stay on the stage at all times, "which it does" but i want when the user clicks on 1 of the other 4 buttons for the remaining 3 to disappear. Example... when the user clicks on the KIDS button, the COUPLES, PORTRAITS AND BELLIES buttons disappear, or when the user clicks on COUPLES, for the KIDS, PORTRAITS AND BELLIES buttons to disappear, and so on.

[Code]....

View 4 Replies

ActionScript 2.0 :: Move Object With Keyboard And Limit With MovieClip?

Aug 9, 2011

I try to create a MovieClip that i can move with the arrow keys. That worked with:

ActionScript Code:
var keyListener = {};
keyListener.onKeyDown = function()
{

[code]....

Now I tried to limit the area where I can move this MovieClip "cursor_mc". I found a lot of solutions but those where always solutions where the limitation zone was a rectangular. I was looking for a solution where I can create a "cursorlimit_mc" MovieClip and as long as the "cursor_mc" clip is inside of this clip I can move it with my keys. If it isnt possible to limit that, maybe I can create more than just 4 points and draw the limitation szone?

View 0 Replies

ActionScript 2.0 :: Limit The Range With Which A Movieclip Can Be Moved On The Stage?

Jan 3, 2009

I'm trying to limit the range with which a movieclip can be moved on the stage using the mc_name._y = mc_name._y + 10. I'm thinking of using a if/else statement but I can't figure out the proper way to write the code.I don't want my movieclip to be able to be moved off the stage completely.Here is the code so far:

zoomin.onRelease = function () {
tellTarget("a")
{[code].....

View 2 Replies

ActionScript 2.0 :: "if The Movieclip Is At Position 3 Stay There - Otherwise JumpTo Position 2"?

Jun 27, 2006

using the following jumpTo script as a guide how do I write an if statement for a function that will basically ask "if the movieclip is at position 3 stay there, otherwise jumpTo position 2"?

Code:
var bg1x = new Array(0, -1280, -1014, 0);
function jumpTobg1X(number) {
gradientNav_mc.newX = bg1x[number];
}

I have tried a bunch of if/else statements but I can't get it working. I can't figure out how to write it properly. I tried something like this:

[Code]...

View 2 Replies

Get A New Tween To Just Stay Put?

Oct 23, 2009

The problem is this when the layer with the box on the time line ends the box disappears from the stage as well. now with a old school tween I would just add a blank key frame to the end of the movie and problem solved. But since I'm playing around with a the new type of tween when I try to stretch out the time line it affects the timing of the previous frames. In some cases the whole animation slows to a crawl in others the bouncing in the motion preset happens at the wrong time making it look like the bounce is happening in mid-air.

So what I would like to do is just stretch out the time line in some way and just have the first part of the new tween stay in time and pretty much add dead space to the end of the tween and have the box stay put.

View 5 Replies

How To Get Text To Stay

Jul 2, 2009

have a very simple webpage that I want to have a very simple, respectively, flash object. It is a jpeg banner that I want to have text come in from both sides at different times and then stay put... I got the text timing and end locations where but the text disapperars after the tween.  Maybe I went about it the wrong way, but what I have tried so far is:
 
Making a new layer and creating a text field and trying to position it in the same spot on the next frame and tried it on the last frame of the tween( two different tries).  When I try to change the location and size of the text box (so that it theoretically is in the same spot) the changes wont stick.. Is that supposed to happen.
 
So how to I get it to look like the text tweened to the spot I wanted it to and then stay there?

View 3 Replies

IDE :: Get A New Tween To Just Stay Put?

Oct 23, 2009

I got a box symbol nothing fancy I applied a motion preset to it and its just a basic bounce. I would like it when the bounce is over the box would just stay still on the stage and the time line would continue to play.

The problem is this when the layer with the box on the time line ends the box disappears from the stage as well. now with a old school tween I would just add a blank key frame to the end of the movie and problem solved.

But since I'm playing around with a the new type of tween when I try to stretch out the time line it affects the timing of the previous frames. In some cases the whole animation slows to a crawl in others the bouncing in the motion preset happens at the wrong time making it look like the bounce is happening in mid-air.

So what I would like to do is just stretch out the time line in some way and just have the first part of the new tween stay in time and pretty much add dead space to the end of the tween and have the box stay put.

View 1 Replies

Flash Xml Changes In Server Won't Stay?

Mar 6, 2010

I have a flash template loaded on my server (Go Daddy) and when I make changes to the xml file they show up changed and then after about 10 minutes my xml file changes back to what it was before changed it, except the only changes it takes is if I add a new image and make that change in the xml its ok but if I try and change the order of the photos in the xml file or the text descriptors at the bottom of each photo it changes for a minute or so then reverts back to it old way. Here is an attachment of my xml file.

View 10 Replies

CS3 Buttons To Stay Active?

Aug 22, 2010

I decided to post this question as a new thread since my enquiry is altered.

I got this sliding menu attached ("ActiveButtons.zip") that works according to plan. My problem is that I want the buttons to stay active(red) while the corresponding image is in place. Is this doable with a button?

View 1 Replies

Edges Won't Stay Hidden?

Jun 10, 2009

I didnt see a place in preferences to keep edges hidden. I have some text that has a dotted line around it. I can hide it with hide edges, but as soon as I select them and let go, the edges come back. maybe their not edges since theyre dotted. maybe its flash telling me somethings not set up correctly? anyone?

View 2 Replies

Get A New Tween To Just Stay On Stage?

Oct 23, 2009

I got a box symbol nothing fancy I applied a motion preset to it and its just a basic bounce.I would like it when the bounce is over the box would just stay still on the stage and the time line would continue to play. The problem is this when the layer with the box on the time line ends the box disappears from the stage as well. now with a old school tween I would just add a blank key frame to the end of the movie and problem solved. But since I'm playing around with a the new type of tween when I try to stretch out the time line it affects the timing of the previous frames. In some cases the whole animation slows to a crawl in others the bouncing in the motion preset happens at the wrong time making it look like the bounce is happening in mid-air. So what I would like to do is just stretch out the time line in some way and just have the first part of the new tween stay in time and pretty much add dead space to the end of the tween and have the box stay put.

View 3 Replies

Flash :: Will Not Stay Open When Run

Dec 30, 2009

Recently today my Flash started not staying open. When I run it, it shows the normal screen with the timeline, properties, stage and all but then it closes down. I can still open my previous works except Flash just closes down.

Worked normally like 5 hours ago. Although something strange did happen when I was using it 5 hours ago. My library suddenly became empty of all tweens and symbols and stuff but my program still worked. Restarting Flash brought back all the symbols to the library. But I doubt that this could be the cause of my newer more serious problem.

View 3 Replies

Get A Down Button To Stay Down After It Is Clicked?

Jan 21, 2011

How do I get a down button to stay down after it is clicked.

View 7 Replies

Swf :: Stay On Scene In Flash?

Jan 14, 2012

I am creating a small flash project which has few scenes, in one of them I've exported FLV video(5 minutes). When I test this scene it plays the whole video, but when I run the project it is not showing the whole video(less then one second on this scene and goes to the next one). If I'll increase the length of the timeline to show the whole video then the project won't compile because of too many frames. Is there any way to play the whole exported video and then go to the next scene?

View 1 Replies

IDE :: Text Field Won't Stay On Top?

Apr 16, 2009

I heard this is a great forum for Flash. I aspire to make flash games. I am learning from a book at the moment "Actionscript 3.0 Game Programming" and I'm going through it and trying to improve the example games in order to understand flash better. I am stuck with a problem and can't find the answer on the internet.In a game I load up some pictures and have them slide around. The problem is I want to have a dynamic text over the pictures but it always gets covered up. I tried putting the text field in a new layer and have that layer on top but when the pictures load it covers it up.

View 2 Replies

IDE :: Get The Colour To Stay Red When It's Clicked?

Nov 21, 2009

I have buttons with black text. The buttons (not the text) change colour to red when you rollover them. I can't seem to work out how to get the colour to stay red when it's clicked. Do I make a duplicate symbol which is already red to replace it when clicked? And I'm also unsure of the actions I'm supposed to use if any??

View 1 Replies

Flash :: Xml Changes In Server Won't Stay?

Mar 9, 2010

When I make changes in my xml file on the server they won't change on my site. The only changes that work is if I add new images and make those changes in the xml file it's ok but if I try to change the order of the images or add new text that is at the bottom of each image it won't change. I'm on a Mac with the latest Snow Leopard OS. I use Transmit for my ftp browser.

View 5 Replies

ActionScript 3.0 :: Get A Swf To Stay On Top Of Other Swfs?

Jul 29, 2011

I have created a website which loads external swfs as pages onto the main stage on the click of a button. I have a swf called logo which loads separately and stays on the website the entire time. I want the logo swf to stay on top of everything else. but right now it stays underneath. how to fix my code so that the logo swf is on top?

Here is my code:

Code:
stop();
/////// Load logo SWF
var swf:MovieClip;

[Code].....

View 3 Replies

ActionScript 3.0 :: Make A Button Stay On Top?

May 15, 2009

I have two buttons assigned like this:

buttonprev.addEventListener(MouseEvent.CLICK, image_previous);
buttonnext.addEventListener(MouseEvent.CLICK, image_next);
 
These events fire a function which looks like this: loader.load(new URLRequest(getPath()));
 
My other code is:
loader = new Loader();
loader.contentLoaderInfo.addEventListener(Event.INIT,initHandler);

[code]....
 
If my picture takes up the area where the buttons are, the buttons slip underneath the image. How can I make the buttons stay on top all the time? My movie works fine as long as the picture that I load from a nearby directory does not cover the buttons..

View 5 Replies

ActionScript 3.0 :: Movie Stay On Screen

Sep 8, 2009

What I am trying to explain/do is to take a movie and not only have it follow a guided layer, but also to have it not dissapear.So for example, I have sucessfully made a movie move around a path as I broke some letters in to symbols and created a guided layer out of them.However I don't want the move to keep dissapearing and initializing as it transverses the path.To better explain this, please check out the online example: UrL...Now instead of holding down the mouse button and having the movie of hearts just keep compounding wherever the key_pressed mouse goes to, Imagine the hearts coming to screen as the movie goes through the guided layer so as to spell out a word. Here is the minimum that I think I need and I have edited it below and tried change the "mouseX" and "mouseY" to something such as flashmo_group.X and flashmo_group.Y but the resulting effect does not follow the path.[code]

View 2 Replies

Professional :: Getting External Swf To Stay Visible?

Jun 16, 2010

I have an external swf that contains a button that controls my main swf's timeline.I can get it to navigate fine, but as soon as it navigates, my external swf disappears, because my main swf is no longer on the frame my external swf was imported on.How do I get the external swf to stay visible along all the frames of my main swf's timeline?Here's the code I use to import the external swf:[code]

View 2 Replies

ActionScript 3.0 :: Stay Scrolling With The Background?

Nov 19, 2010

I'm trying to create a scrolling game in as3. The problem I'm having is how to make things like explosions and rockets firing from the ground at the player object to scroll with the background instead of staying stationery with the player object during the game. Does anyone know a simple method to keep the explosions and other stuff not connected with the player object, to stay scrolling with the background?

View 3 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved