I've received a .fla file with a movie that I'm supposed to edit. I have managed to make little changes as entering the movieclips and updating pictures.I have to cut out from the movie from a certain point to the end. I have managed to selecting all frames in that certain point and pressing SHIFT + F5 .The second part that I must cut is between the frames 510 to 671. I have deleted the layers with the content that was supposed to appear in that part of the movie, but I'd like to make the movie shorter by cutting these frames as the only thing that is seen in that part is the background image.When I select all the frames between 510 to 671 and press SHIFT + F5 all the rest of the movie is modificated, pictures aren't shown and there are graphics appearing where they should not.
I have a movieclip that I want to be resized when a button is clicked. I want the animation to be smooth as if it had weight though. I read the tutorial on this but I need something slightly different, I would rather it where I can just refer to a function that is set in another movieclip. That way I could easily refer to it again and just set the height, width, and if possible, x, and y.
And my second question, is how to keep the border of my movieclip that is going to be resized the same thickness. I want the inside to be resized but the sides to stay the same width but move to stay on the edge.
I have a large movie clip and four buttons. Each button is supposed to move the movie clip to a specific _x and _y location. What I'd like to do is have the MC scroll smoothly, rather than jump to the new location.
Here's my file so far. Note that I have some onClipEvent code on the MC itself, and the button code is on the actions layer.
It scrolls, but it seems to be ignoring the _x and _y values for some of the buttons.
is there any way to get a smooth rotation in AS? I would assume i would use this._rotation, but it doesn't smoothly rotate the way i want it to.I'm trying to make a movie clip that randomly goes to a location while rotating.[code]
I created a movie clip which plays ok. But when it ends there is a slight jump, if you will, when it goes back to frame 1 to begin playing again. Does anyone know how to make the transition unnoticeable from the last frame of a movie clip to the first frame of a movie clip?
I have a motion tween that is 180 frames in length. When the tween ends on the last frame and returns to the first frame to replay there is a slight jump in the tween. Is there anyway to stop the tween from jumping from last frame to the first?
I have approximately five external movies I am loading into one main movie. I load the movies using various buttons in the main movie.
My issue is this...I press a button and the first movie loads and then runs to the end of the timeline. Works great.When a push a second button the second movie loads and runs to the end of the timeline. Works great also.but I hate how there is a blank space between the movies.
All the movies start with a white stage and end with full graphics. When I press a second button, the movie on the stage disappears immediately and I am left with a white stage for a few seconds while the loading movie animates onto the stage.
I want there to be a cross-fade or some effect that allows the loaded movie to remain on the stage while the second movie is loading. Is there a way to make this happen?
I'm including the code I have for loading movies so you can see what I am working with thus far.
a good method to chop and or slice (animated) a movie clip? i know how to cut an image:
Code: var loader:Loader = new Loader(); loader.contentLoaderInfo.addEventListener(Event.COMPLETE, breakUp); loader.load( new URLRequest("http://farm5.static.flickr.com/4015/4514034027_a5ebcac2cf.jpg")); [code]....
flash document is.. 1920 px by 1080 px, 1080p resolution for animation, standard stuff.When I go to export the stage as a PNG files, doesn't matter if I specify the resolution as 1920 by 1080 or click match movie, the exported png file is HUGE, the size to be exact is 8000 by 4500, why is this? I can't find a way to fix that.Secondly, it's not exporting the full stage, it seems to be cutting off most of the right side, see the image below.[URL]
I just created my first animation of a plant "growing up", following the tutorial here: http:[url]..... It worked wonders: I basically drew a few lines, transformed it to symbol, created a new mask and script layer, and just used a brush to cover a part of the image on every frame in order to give the illusion of appearance. However, I don't need a background, I just need to cut the animation and make it an independent SWF.
Here is a picture of the mask.And here's where the mask cut off the texts.why the mask cuts off the texts when the mask is drawn close to the orange border?
I have array where in first position I have few information:for example:aa=[122-345-567, 4568-765-875, ......]I want to take only number 122 or 4568. What to do? How to cut from array numbers before dash?
How would I go about cutting a transparent hole into a Graphic and leaving a stroke around the hole I just made (similar to if I had used the Eraser tool on the Flash canvas, minus the stroke)? My first instinct tells me to draw a circle over the spot I want to "cut out" with a stroke of an arbitrary width and an alpha-less fill, but if I were to click-and-drag this hole - or simply make another overlapping hole for that matter (again, as if I were using the Eraser tool), the stroke would definitely not appear the way I want it to. If anyone is familiar with how the terrain is blown away in the 2D Worms series, that is more or less what I am going for.
I made a post under actionscript 2.0, but I wasn't sure if it belonged there. So here goes.I made a text box and added a mask to it, it is really long so I made it scrollable. For some reason it keeps cutting off the bottom of the text, meaning it won't scroll all the way down, it truncates it. The text is dynamic and the fonts are embedded, heck I even tried breaking the fonts apart.
Basically I'm making an XML based quiz with three possible answers for each question. The only problem is that I'm having to write the code several times for each possible answer, and I'm sure this can just be condensed down to one or two statements using a loop. Here is the code I'm using:
var theQ:question = new question(); theQ.qText.text=myXML.ques[0].q; addChild(theQ);
I have a scrollpane who's source is a movieclip filled with checkboxes.It works fine, except that some of the checkboxes names are cut off.The checkboxes are for science words.Biology is fine Astromony comes out Astronom with the y cut off. Adjusting the scrollpane width does not help Adjusting the movieclip width makes it look bizarre like it's stretched.
I've dynamically drawn a gradient background on a little widget I've built (pulls in EPA/National Allergy Bureau climate data from a vendor, if you're curious), and I have applied an AS 2.0 drop shadow filter to the background. Standard stuff...except...
...I embedded the SWF using SWFObject and matching the dimensions of the widget stage exactly. And the left/right edges are cutting off. Are there any guidelines for using a background AS 2.0 drop shadow filter and accommodating the filter with the embed? It's a 10px (5px depth, 5px blur) 90-degree filter, and I left room on the stage for the 10px below the background. But the "edge" I expect to see on the embed isn't showing up.
Here's the filter code, BTW:
Code: outlineShadow = new DropShadowFilter(5,90,0x000000,0.33,5,5,1,2,false,false,false);
I am trying to implement htmlText for a text component as the returned string is in html format (with the html tags etc). If I put a text=.... i get the full text, but with the tags (which i want converted to html). So i use htmlText=.... and it formats it fine, but cuts half the text from the variable. The text im supposed to get back has tons of html tags, and maybe its cutting it somewhere because of the tag its not able to escape... How do i fix this?
I have installed FMS 3.5 on three different machines with the same less-than-optimum result. Two of the servers were virtual on VMware ESX3 and the third is on dedicated hardware: Quad 2.33GHz CPU, 8GB RAM, Gigabit interface, Win 2003 Ent SP2 and all latest patches through 1/6/10.
The primary problem is when I connect three PCs to the default web page and start the Getty demo video, the delivery of the video is jerky. There are pauses - orange rotating circle - and the motion looks almost like stop-action animation.
I created a slideshow where the images fade out and in using a motion tween from 0% alpha to 100% alpha in 15 frames. The fading doesn't look right to me it is very jagged. Is there a better way to do this. My files are too big to upload even when I tried to limit them to 3 images.
All I want to happen is some text (6 words) animate in from the right hand side and slow to a stop in the centre of the banner. Simple.
The problem im having is the when the text animates on it tends to stutter and appear jerky whereas I need it to be very smooth.
Ive tried animating the text using basic frame tweening with easing and with various high frame rates.Ive tried various coding methods using tweening classes (both the inherit class within flash and imported 3rd party classes) which seem to improve the animation slightly but still with some random jerkiness.[code]...
I'm loading some external images and trying to get them to smooth, but for some reason it's not happening. i've been trying everything i can find on the internet over the past 10 hours or so, and nothing's worked.The code on my movieclip (first frame) is:
[code]...
my images are very high-res, so i know it isn't a resolution issue. anyway, they look crappy when they're sized down too. also, i'm pretty sure smoothing is the issue, because i have a very similar image in the library (a detail from the same shot, and similar resolution, etc.), and it looks great when i allow smoothing in the bitmap properties panel.
I'm creating this simple strip crawl of logos (1920x95). It's a about 40 logos in one strip that I imported. I created a tween that scrolls the logos right to left lasting about 1 1/2 minutes @ 24fps. When I export the SWF file the scroll is not smooth and there is all types of small jerky movements.
