IDE :: TWEEN From Currentframe To Another Frame?
Feb 26, 2010
I have a movieclip that contains a sequence of jpgs one per frame.When the user clicks a button I would like to use the tween class to move the clip on its x and y axes to a target position but also move the clip's frame from its currentframe to another on its timeline.
var myTween=new Tween(MOV,"x",Strong.easeOut,MOV.x,nx,3,true); //works
var myTween2=new Tween(MOV,"currentFrame",Strong.easeOut,0,260,3,tr ue); //doesn't work
I can tween the x and y properties ok but cannot see how to tween the frames. currentFrame is read only so that won't work.
View 1 Replies
Similar Posts:
Jul 16, 2010
i'd like to control MovieClip timeline witch contain several DisplayObject (like Sprite, Button, ...) these DisplayObject have Motion (AnimatorFactory). How can i do seek frame-by-frame the MovieClip Timeline and use the currentFrame to control all Motion child.
[Code]....
View 18 Replies
Mar 5, 2012
I have checked over and over again. But when I run it, it always skips the first two currentFrame if conditionals and runs the last currentFrame if conditional. I have this code in another file and it works perfectly...
[Code]....
View 2 Replies
Nov 6, 2009
Im having a little bit of trouble trying to make a button give me different results based on what frame the main timeline is on. I am trying to get a button to go to a different link based on what frame the main timeline is on. If I am on frame 5 It will trace back "4" .. that is fine but other frames trace back the frame number and also 4.
frame 2 click of button traces back 1 and 4
frame 3 click of button traces back 2 and 4
frame 4 click of button traces back 3 and 4
frame 5 click of button traces back 4
[code]....
View 8 Replies
Aug 28, 2011
I have a movieclip on the stage with 3 frames. Each frame has a stop(); in the actions layer. I have double (and triple and quadruple) checked the label names.There is a button to toggle between the three frames of the movie clip. A Frame 1 button, a Frame 2 button, and a Frame 3 button. The movie clip (there are lots of them) is then spawned with a mouse click. The movie clips are already declared at the beginng. They are not unlimited so I can just have a for loop go through all of them and change the frame number even before they are spawned and added to the display list.Frame 2 and Frame 3 work just fine. But the button to go to Frame 1 will display Frame 1 on all of the pieces that are already on the stage, but on all new pieces that will be spawned, it just displays whatever other button was pressed last. For instance if I have a movie clip on the stage that's displaying Frame 2 and I hit the buttom for Frame 1, the movie clip will switch to Frame 1. But if I spawn a new movie clip, it will display Frame 2. If I then click back on the Frame 2 button and then again to Frame 1, the movie clip will correct itself.
I can't find where on earth in the code it's going wrong. I've tried using traces but I can't find any problems or inconsistencies. Everywhere I put a trace to tell me what frame the object is at, it traces correctly. I'll click on Frame 1 button, then click on the stage, and it will trace to the output menu that the current spawned movie clip is on Frame 1 when it's very clearly displaying Frame 2.[code]
View 2 Replies
Jun 25, 2006
I have a movie clip which, when closed, should send you to a specific frame on the main timeline... I have used frame labels on the main timeline... Here is a bit of my code so far:
[Code]...
View 5 Replies
May 11, 2011
I am a first time flash-maker, and I sure how to get things to work as planned.I have written the following code:
stop();import flash.events.MouseEvent;Weightlifting_btn.addEventListener(MouseEvent.CLICK, CursorClick);function CursorClick(event:MouseEvent):void{gotoAndStop("25");}
But my problem is that i have a motion tween that startes at frame 5 and ends at frame 25. And the code says that at will go to and stop at frame 25.what I really want it to do, is to go to frame 5, play the motion, and stop at frame 25.
View 2 Replies
Nov 19, 2010
I have an problem whereby I have created a Frame by Frame dancing human figure and now I want to move it across the screen as well as scale it using a Tween.
I have spent quite some time slightly adjusting the upper arms, forearms, hands, legs etc and creating a new keyframe for each movement. All the movements are all in one layer... ie the forearm doesn't have it's own layer etc. I am running the animation at 24fps so there is quite bit going on.
I now realise that I should have created a symbol/movie clip from the first image I created and then scaled and moved the image first before animating it's limbs but I only realized that after hours of work and I would hate to start all over again.
So basically what I have is a dancing human figure in the one spot moving it's arms and legs and I want it to move across the screen and become larger by scaling it using a Tween. I could of course re-edit each keyframe by slightly scaling and the slightly moving the figure but that will take quite some time to get right as there will be a fair bit of trial and error doing it that way.
View 3 Replies
Jul 20, 2010
I've created a multi frame MC for placing each of my slide out images on and have added a tween slide out MC.my onrelease is working and I've correctly switched the image frame for the relevant picture being clicked before playing the tween MC.However once the MC stops playing the image MC is reverting back to showing frame one image.Why is this happening? Also why when the slide out MC is over the smaller clicklable image the hit area is still available through the image being shown?I've ensured that the slide out MC is on the top most layer, how do I make its backgroud solid so any clickable item underneath is not available.
View 7 Replies
Sep 14, 2009
In the old motion model it was as easy as highlighting all of the frames, converting them to keyframes then removing the tween. But I have no clue how to do it with the new motion model.
View 6 Replies
Aug 13, 2011
I have a button in "frame 1" that leads to "frame 2". The file has simple code:
myButton.addEventListener(MouseEvent.CLICK, gotoFrame02);
function gotoFrame02(event:MouseEvent):void {
gotoAndStop(2);
}
The problem is no transition when the frame changes. Is it possible to apply Tween transition when the frame changes?
View 2 Replies
Jul 24, 2009
It's a simple animation. Rectangle with a med. quality blur filter & 0% opacity tweened several frames later to med. quality blur filter & 80% opacity. This is a normal motion tween. So what it does is fade in, fade in, fade in...then oops! - jumps to 80% opacity. The last frame of the tween is 80% opacity, but the frame before that is significantly lower in opacity. So for some reason it's jumpy.
This was happening to me before with a different .fla when I had one blur filter on low quality and the other on medium. But in this instance, both keyframes have the same quality.
View 4 Replies
Sep 2, 2009
I am working on using AS3 to do my tweens, rather than working solely on the timeline.
Just a quick question, say I have a logo... when I get to frame 5 I want that to fadeIn. I have the AS3 to tween it in, however, I am not sure what I assign my function to?
View 10 Replies
Jun 25, 2011
I am wanting to fade out of a frame and then fade into another, and the way i was thinking of doing this was to code a tween to alpha 0 and then use the code:
home_btn.addEventListener(MouseEvent.CLICK, startMovieHome);
function startMovieHome(e:MouseEvent):void
{
[Code]....
I dont know how to ask it to tween and then go to the label "home" once the tween is complete..
View 1 Replies
Jul 31, 2008
my it does not stop to frame 2, after the onMotionFinished function is executed. I dont see the green rectangle containing number 2.
View 3 Replies
Jun 10, 2010
I have created a code that basic move in randmom positions 3 opjects (mc , mc2 ,mc3) in 65 frame rate .
Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
[code].....
View 1 Replies
Jul 29, 2009
This is my first time working with flash and actionscript. when my project increased in size, it became frustrating to look through 2 or 3 hundred lines of code to find my mistakes. I decided to code in frames, so that one animation or movieclip could be handled by each frame, making it easy to edit each individually. So far so good, but i am trying to reuse a tween from an earlier frame, and it doesn't seem to work. I was under the impression that if you define a variable in a previous frame, you can use it in a later frame.
here's what it looks like
(frame 5)
var closeMenu:Tween = new Tween(mainMenu_mc, "x", Strong.easeOut, 238, 900, 3, true);
there is a frame in between that does: gotoAndStop(20);I want the animation to start right when it gets to frame 20:
(frame 20)
closeMenu.start();
TypeError: Error #1009: Cannot access a property or method of a null object reference.
I can copy and paste the original var and change the name from closeMenu to, say, closeMenu2 and it will work fine, but I feel like what I did should work.
View 0 Replies
Mar 30, 2010
I want to put a function in this movie that allow me to make visible a tween function after some frame, for example 100. Here is the file; i'd like to make visible the page of book after 100 frame. So, how i could make it possible?
View 1 Replies
Jun 9, 2008
I would like to go to a certain frame in my timeline after the last tween has finished! I know it most likely will have a "onComplete".
HTML Code:
import gs.TweenMax;
//what elsee?? =[
View 4 Replies
Jun 12, 2009
How do you create a motion tween when I insert keyframe in frame 28 then I click on the object and create motion tween but when i click in 60 to insert keyframe I get opition of position, scale, skew, rotate ect. I just want to insert keyframe. What am I doing wrong?
View 4 Replies
Mar 29, 2009
I have a Fade-in/ Fade-out movie that works with the 'alpha'. It begins on a Mouse_Over and works its way toward 0, but stops and reverses from where ever it is at on a Mouse_Out and works it's way back towards 100. I pretty sure someone here showed it to me -- and it has been the cats' meow. I'm wondering if Flash will let you do the same thing with a motion. I played around a little and replaced the 'alpha' call in the function with 'motion' and the code stayed blue (which I'm assuming means that it is acceptable). This would make a really great function, assuming that it is possible. I've enclosed the 'alpha' code so that you can see what I am referring to.
View 14 Replies
Aug 9, 2009
I currently got a movieclip. On the timeline of the movieclip i've put a keyframe on frame 100, so that my movieclip is 100 frames long.On the stage I got a 100px wide red square as BG and on top of that a copy of the 100px square just in blue (my shape tween).What im basically trying to do is having the 100px blue square act as a percentagebar. So when I do something like:
ActionScript Code:
percentagebar.gotoAndStop(50);
The shape tweener should tween from frame 1 to frame 50 (with 50 representing 50%).
View 9 Replies
Oct 16, 2011
have script running with onClick animation, then inside mc _up, _over, _down states.
What I need is when the tween animation is over then it needs to go to next frame in timeline. Tried everything... nextFrame - OnMotionFinished
Everything else is working fine. The tween- the rollovers- sound - are great!- but how do I get to the next frame and stop.
here my code on maintime line
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;
[Code].....
View 0 Replies
Jan 5, 2006
I have a movie running @ 24 fps. I particularly need to control a motion tween to run slower than the movie fps. How do i control frame rate of a particular motion tween.
View 1 Replies
Oct 27, 2009
Im doing a project that works with lots of tweens im having always the same problem when i call Tweens to execute in the same frame..The Tween most of the times freez before this motion end.I fixed the tween for the background... but for that i had to put the tween in another frame and call that frame from my home Frame..Now im trying to do some Tweens with some buttons, but it most of the time freez before the motion ends.Should i forget to use Tweens in the same frames?
View 1 Replies
Nov 1, 2009
import fl.transitions.Tween;
import fl.transitions.easing.*;
var homemanTween:Tween = new Tween(homeman_mc, "x", Elastic.easeOut, 1000, 50, 3, true);//frist tween
var adobeTween:Tween = new Tween(adobe_mc, "alpha", Regular.easeOut, 0, 1, 3, true);//second tween
how can I animate the 2nd tween after 3 seconds when 1st tween stops.
View 9 Replies
Feb 8, 2009
The _currentframe property is readonly, so how do i tween between keyframes in a movieclip?
View 3 Replies
Apr 22, 2009
how to tween to a frame label on the main timeline using Tweener?
I can get this to work:
[AS]
var Root = MovieClip(root);
function BackToCorridor(e:Event):void
{
Tweener.addTween(Root , {_frame:10 , time:1 , transition:'Linear'});
}
[/AS]
I want to tween to a frame label, but if I put one in there, it doesn't work...
View 6 Replies
Feb 9, 2010
I am coding this loader that requires multiple Scenes because of long swf presentations. My loader swf is using a timeline scrubber and I am having problems when dealing with Scenes because the currentframe goes back to "0" when a new scene starts and scrubber goes back to the beginning.
View 1 Replies
Jul 19, 2009
I have an if statement set up for the rollout on a button:
on (rollOut) {
if (_root.mb == false) {
copymb.gotoAndStop('off'); } else if (copymb._currentframe ==
[code]....
View 2 Replies