IDE :: Turn Flash Animation Into A Video Clip?
Apr 18, 2010
I'm trying to turn this flash animation into a video clip. > the swf in question <
1) How do I get the first frame of the second "photo" (which is actually a short video clip) to be still for maybe half a second, before the video starts playing?
2) When I tried exporting it as an avi, it didn't play properly. The animation of the first photo coming in was fine, and then the second photo came in but the video clip didn't play. (it just looked like a still photo).
I'm making a video with Windows moviemaker (unfortunately) and all I wanted was that short animation to be made into a a video clip (either avi or some format that is compatible with Windows moviemaker).
Or if anyone knows a site that converts an swf to an avi online, for free, please let me know, that would be great. Because it didn't work when exporting it as an avi from Flash, but maybe if I can convert the swf to an avi then it will play properly.
View 2 Replies
Similar Posts:
Jul 21, 2010
So im opening it up to the commuity as a programming challenge!!For something which i assumed would be very simple, writting a robust and solid multi turn spinner handle for flash in as3 has become the bane of my life.Feel free to download my attempts so far (attached), which cover the basics of a single rotation, and make it look like im further ahead than i actually am.The difficulty lies with the very specific things I personally need the spinner to do,and the fact its SO HARD to explain..Its actually used to control a piece of animation that is 72 frames long.I need the first "lap" of rotation to send the playhead to frames in the 1-36 range and the second rotation to send it to frames 37-72. So two full spins would take it to the final frame, one full spin would go half way to frame 36.
Problem is the rotator handle needs to be locked at the initial position, so a user can't drag it backwards to start with but can drag it backwards once theyve moved forwards. (think of turning on a hot water tap, many turns in one direction until it stops fully on, then the same turns back again to reach the original start position of fully off)I also need the rotator to be able to be used in anti clockwise and clockwise modes.The ideal is to be able to set the total number of animation frames to be controlled and the number of rotations required to reach the final frame, then have the spinner work everything else out for me.
View 3 Replies
Oct 7, 2011
I'll start off by saying I'm a newbie, just putting that out there. How do you make a turn by turn multiplayer flash game? I don't know if an engine is made in AS3, PHP, Javascript, or whatever,I made my game already, it's just that it isn'tmultiplayer yet. Basically, there are lines, and each player crosses out a number of lines, and the last player to cross out a line is the loser. I want it where one user crosses out some lines, then presses End Turn, then the other does their turn and then presses End Turn to allow the other player to move his cursor. But how can I get both players to see the same frame and only have one player have the ability to move the cursor during a turn? Is there some easily adaptable multiplayer engine for flash for newbies out there
View 2 Replies
Aug 23, 2009
I just got Flash CS4 yesterday. This is the first time I have ever used Flash. I watched some tutorials and now I'm trying to do something on my own. I want some text against a white background to start out white in the lower-left corner. During the animation I want the text to move to the upper-right corner and turn black gradually as it goes. What I did was this:
created an actionscript 3 file
Made some white text at the bottom-left
Right clicked at the 90th frame on the timeline and clickedInsert KeyFrame
Right clicked between the 1st and 90th frames and clicked Create Classic Tween.
At the 90th frame I moved the text to the upper right. Then I clicked on proprties and set the text effect to brightness and set the brightness to 0 so the text would be black.When I hit enter to go through the timeline it shows me exactly what I expected: The text moves from lower left to upper right and gets darker as it goes.
When I hit Ctrl+Enter to preview it as a published movie the text stays white the whole time until it gets to the upper right. There it turms black. So all I see is nothing for a few seconds and then a flash of the black text.Also, if I click at each frame in the timeline I can see the text is in a different place and getting brighter gradually.I'd like it to play once rather than looping. Under the effects I clicked on a thing that says play once but it still loops. Where do you control this?
View 3 Replies
Jan 26, 2009
How can I turn on / off the volume of a specific video in my project? (i've many of them, but i want to turn off the volume of only one.)
[Code]...
View 4 Replies
Aug 11, 2011
I've imported a Quicktime video clip into my scene. I want to slide this video clip in from off screen and have it stop at center stage using keyframes. When I use keyframes to move a video clip - the playback of the clip resets to it's first frame at every keyframe. Is it possible to move a rolling video clip using keyframes without altering the playback of the clip?
View 2 Replies
Feb 21, 2012
I want to create a button to turn on and off a movie clip, did any one know how to do it!
View 6 Replies
Jul 6, 2003
okay here's my code
Code:
onClipEvent (enterFrame) {
for (z; z<4; z++) {[code]....
how do you turn the s[z] into something like s1 - s2 or s3 ? i just want different movie clip names for each loop..
View 2 Replies
Aug 26, 2010
I've come a long way with this sliding menu("Sliding menu.zip"). There's only one more thing that needs to be fixed. Can anyone tell me how to get the first movie clip button ("1") to be red when it arrives? When the user clicks on another button I want the red number one to turn black. It's sounds so simple but my mind is blank.
View 2 Replies
Oct 19, 2010
I'm getting no errors on this, Go (comeback) is my movie clip which should turn up when the mouse leaves the stage area and leave when the mouse enters the stage. I know it's probably my removeChild command but I don't know how to fix it.
[Code]...
View 4 Replies
Dec 16, 2010
I have a Flash-file with some ActionScript code that loads an RSS-feed and animates the content. Now I need to convert that to a video file to use on an external display. Since the RSS-feed updates quite often, this needs to be automated and preferably run on Linux.
So far, I've only found tools to convert FLV to another video format, but that isn't exactly what I need.
Are there any tools available to do this or can it only be done manually through Adobe Flash?
View 2 Replies
Apr 20, 2009
Im wondering if its possible to combine flash animation over a background of live action video using Flash? I'm looking for an effect similar to the movie Roger Rabbit...
I have done some experimenting, and I realize that its possible to import a live action video into flash and then do some animation on another layer and then publish it - but with this method its essentially impossible to guess the timing of the live action video...
import a live action video into flash and actually see the timing /frames of the video within the Flash IDE? Or should I be using something like after effects?
View 1 Replies
Dec 23, 2009
I need to make the cursor turn into to a hand when the user is with the mouse over the movie clip. when I use the following code the entire movie turns into to a hand but I just want it on my movie clip.
[Code]...
View 1 Replies
Apr 4, 2009
Check out the beginning of my site [URL]. Look closely at the flowing dress... it stutters when it tries to loop. However, look at the ripple animation behind the hexagon; it loops just fine. I recall when I worked on the ripple animation that I had a hard time getting it to loop, and that I had to add some action script to it. However, when I look at it, I don't see any action script at all.
I was thinking what I used was
on (complete) {
this.autorewind =true;
this.play();
}
but that doesn't work.
Here is how my files are organized:
FlowingCloth << Movie Symbol, contains a .FLV of the flowing cloth
FlowingDress << Contains FlowingCloth and the Bride graphic
Then FlowingDress is placed on the main stage. Using CS3
View 1 Replies
Sep 18, 2010
For example, I've created in Flash CS a movie clip CampfireMC, which contains child movie clip:
m_fire:FireMC
FireMC is an animation of flame CampfireMC controls playback of m_fire, for example, last frame of CampfireMC uses action code:
m_fire.gotoAndStop(m_fire.totalFrames)
And the question is how to replace (not delete/add, as m_fire.gotoAndStop(m_fire.totalFrames) will not work in this case) FireMC to another animation FireMC2?
I've tried the following trick, but it doesn't work
var campfire:CampfireMC = new CampfireMC();
campfire.m_fire = new FireMC2();
campfire.gotoAndPlay(0)
View 1 Replies
Mar 28, 2010
I want to import a video for optional playback into a flash animation. Now, the animation is a loop and replays after 120 frames or so. I noticed when I exported my moviemaker video and imported it into flash, it automatically asked me if i wanted it to arrange it to fit or not. the thing is, i don't want the video to automatically play like flash does for default. What i want is to be able to have it look like how a video looks in youtube 'before' you play it..you know how it has that 'arrow' sitting on it with a black screen showing
you that it's ready to be played if you want it to? well, that's what i want. so, if someone stumbles upon my animation loop on the web, they will see a little video in the upper corner that has the ability to play but it doesn't start
playing right when they get to the page.Also, when they play the video, the length is obviously longer than the loop of my animation, but I obviously don't want it cutting off when my loops ends and restarts, so is there a way to code where it will keep playing on it's own timeline apart from what the flash animation loop is doing? (it should be able to play all the way through, end, and be able to be played again no matter how many loops the animation goes through)second thing i want, is the video to be small..like maybe 220 X 180 in size.
when i exported in Moviemaker, I actually got a video size that I liked but the quality looked poor and sounded poor (I went with the Pocket PC export 148kbps or something like that). Now, was the quality poor just because Flash had to cut it off because of the animation loop restarting or is it going to be poor just cuz PocketPC export is a bad choice? In other words, what export choice should I go with in Moviemaker to get the desired results i want (with the desired width + height I want as well)?
Do you have to code to make it be a video that's got the arrow/blk bkgrd i.e. not playable til a user clicks...or do you just have to export it a certain way in Moviemaker to make it's format that way?
View 23 Replies
Oct 12, 2010
Flash newbie here, using CS5 on a Mac. I've created several Flash animation files, all about 25 seconds long. The animations are fairly simple, about 6 layers each, but all contain a lot of movement. I need to turn the animations into videos that can be played on computers that don't have any Adobe programs, i.e. Quicktime. This is where my issue comes in. The published .swf files work wonderfully, but when I export the files to Quicktime video (.mov) the motion seems to leave a "trail" of images behind it. The static remnants go away after a few seconds but are replaced by new remnants of the current movement. I've played around with the quality and size of the videos, but nothing seems to have helped. I've tried used Xilisoft video converter to convert the .swf files into .avi or .mp4, but the files couldn't be uploaded. Does anyone have any recommendations as to what steps I could take to export my .fla or .swf files into high-quality video files?
View 3 Replies
Mar 15, 2010
I'm using NetStream class to create p2p video conferension. Is it possible to add overlay pictures or animation into video captured from webcam and then send reencoded stream to other user?
View 2 Replies
Feb 16, 2011
How would I display a buffering animation whilst a netsream object was downloading video data? Using Actionscript 3.0 in Flash.
View 1 Replies
Feb 1, 2006
For example, I've created in Flash CS a movie clip CampfireMC, which contains child movie clip:m_fire:FireMCFireMC is an animation of flameCampfireMC controls playback of m_fire, for example, last frame of CampfireMC uses action code:m_fire.gotoAndStop(m_fire.totalFrames)And the question is how to replace (not delete/add, as m_fire.gotoAndStop(m_fire.totalFrames)will not work in this case) FireMC to another animation FireMC2?I've tried the following trick, but it doesn't work
var campfire:CampfireMC = new CampfireMC();
campfire.m_fire = new FireMC2();
campfire.gotoAndPlay(0)
[code].....
View 2 Replies
Jan 14, 2011
I have created a movieclip1 :head, a second movieclip: body
created a movieclip that uses head and body and called that player.
And I create a simple moving animation : works great !
then I associated a class to head: Head.as
package {
import flash.display.MovieClip;
public class Head extends MovieClip {
[Code]....
When I uncomment trace this.alpha = 1 the ANIMATION IS STOPPED.
View 2 Replies
Nov 29, 2009
I've got a MovieClip containing several child clips (images and text). I'm trying to scale this parent clip very slowly - from 102% down to 98% - this works, however the child movie clips are all scaling a bit jerkily - like they're trying to stick to pixels or something. What's the cure for this? The scaling is done by using a motion tween on the timeline by the way. I've tried to tick "Cache Bitmap" but that makes no difference. If I used the 3D motion tween, there is no jerkyness. But I need to publish to flash 9, so can't use that!
View 1 Replies
Sep 2, 2011
I want to create a custom video like the videos on jibjab, i.e allow a user to upload an image of their face and superimpose this onto a video of a character's face.
View 1 Replies
Nov 24, 2011
I'm making an interactive book and I would like to make my "Text"-layer invisible when I start the "Turn Page"-animation. It's either that, or I'm gonna have to put a code for EVERY 23 MoveClips with the Texts in them, since I'm using the same "Turn Page"-button.
View 2 Replies
Jan 18, 2009
The problem which I am facing is that I have a video clip which has a black background. Now the website which I am working on has images in it. When i load this video clip externally by the action loadMovie("fire.swf", 2); the black background of the video clip also starts showing. I want this video clip to be transparent "without the black background".I have googled it, but all explains the "transparent Flash overlay", which is done with the HTML tags i.e <param NAME="wmode" VALUE="transparent">.
View 5 Replies
Sep 10, 2010
I have some FLV video files to be reproduced sequentially by a Flash video player. Suppose v1.flv and v2.flv. I want the player to start playing v2.flv once v1.flv has reached the end. According to this forum, the onPlayStatus does not fire in progressive FLVs. What can be done? A snippet of what I am trying below:
public class MyClass extends Sprite {
private var nc : NetConnection;
private var ns : NetStream;
[code].....
View 4 Replies
Jun 25, 2009
I want to make a flash form where the viewer/user can watch a video clip of their choice (from a drop-down control or something else if there's a better way). I've found myself totally unable to find our how to do this. I mean, frankly, I don't even know what kind of file to start from the "New..." form at the beginning of Flash (CS 3.0, btw)!
I know how to create a Flash Player and link it to a single video. What I envision is that after the page comes up, with a single player component (initially empty), the user chooses a video from the drop-down list and that video starts playing in the player. What kind of file should I be starting with? {I kinda assume I'll be making an SWF to put on a web page.} Where on earth do I learn how to get the simplest things (e.g., button clicks, etc.) to work?
View 2 Replies
Jan 20, 2010
I am new to flash and I'm trying to do a button. This button should play a short video clip when I would go mouse over it. On Mouse Out, the video should stop and reset.
View 5 Replies
Apr 29, 2011
So for the first time I imported a video clip into Flash 8, used the wizard and even found a tutorial that basically walked me through the steps of the flash wizard.I imported a clip from my computer, progressive download from web server, tried both encodings of flash 7 and 8 medium,SteelOverAll skinning,the let flash do its thing, set my publish settings, published, tried it out and played SWF, looked fine, then uploaded the SWF, FLA, HTML and FLV on my web site but all it does is "waiting for .... .com", my website.I double checked in different browsers, Internetexplorer, Mozialla, Chrome, all having Flash Player 10 latest version and the FLV file is only 1.2MB big, yet after 10 minutes still nothing playing back online........did I overlook something here?
View 18 Replies
Dec 10, 2011
I am trying to simply load and play a simple video clip using as3 code only no flash studio as3 authoring. I have not found anyone that knows how to do this with only as3 code. This is a flv video file. I just need a starting point in AS3. I need only the the as3.
View 3 Replies
