I am currently making an interactive Map, as i rollover to a certain continent, the continent will light up in a yellow highlight, afterward as i click on the continent the box menu will pop up on top of the continent, everything went fine until i browse around inside the box menu( the box menu is bigger than the continent,..wider) cause at one point the cursor will go to a certain area inside the box menu that is not on top of a part of the continent, That's when the yellow highlight went down. I was just wondering how do i make sure the yellow highlight on the continent stays on while i freely browse around the box menu( which is wider than the continent)
Is there anyway to make it so that globalVariablesArray[0] always contains the 'new' value of theState.stateGrowth, even if it changes? In other words, store the property itself in the array, not just the value of it?
I am making a ball move from left to right and back. but when I rollover twice quickly, it also accepts the second rollover command. I would like it to accept that second rollover only when the first one is finished. I mean, I want the first to be finished before it accepts another rollover.I know it is simple to solve this with a tween using frames instead of as, but I was wondering if someone knows how to adapt the script.
When I load a .swf into a target movie that I have on my main page, it is all wrong, the slider menu that I have loading into the target movie, does not stay inside target and it seems to reposition the slider menu to the x psotion of my main movie How can I fix this, so the slider menu in the swf stays inside the target movie when loaded?
FLA file is too large to attach, if needed I can attach it in pieces.
I made a Flash menu with this tutorial:[URL]The animation is different but the scripting is basically the same. I have animated buttons (They're actually movie clips though) that play one animation on rollover, and a different animation on rollout.
What I want to do, is have the button stay on the over state if it's clicked, (so people know what page they're on) until another button is clicked in which case it would do the rollout animation, and then the new button would stay clicked.
[URL]
But the scripting is different I'm not sure how to make it work with what I already have, and I don't really want to start over completely.
I have created an XML driven Drop Down menu using the kirupa tut by Senocular found here. I am trying to figure out how to get the submenus to push the rest of the main menu down on rollover kind of like this. Not sure where to start to get the AS to get the button created fromt he XML nodes to move down.I haven't changed the code found int he tut too much and the menu works fine except that the rollovers just go over the main menu.
I want to generate large text files, basically 4 columns, several thousand rows, of numbers. Making an array with all this info in it occurs farily quickly, it's getting it to a displayable format that takes a really long time. Right now I use something like this:
I'm currently working on a flashsite and are trying to figure out rollover menu buttons. The site has 6 menu buttons and are placed next to each other. I want to put a rollover action on the buttons, that when you rollover a button that the whole button image enlarges and moves in front of the other.
I'm creating an animated (in and out) drop down menu. I've managed to get the menu to open when the user mouses over, with the buttons all selectable. However I can't seem to find an efficient method of making the drop down menu close whenever the mouse is not over the menu. Actions:
im making a button and on the rollover animation I want to have it splatter paint, only thing is I dont know how to get an image into flash that doesnt look crappy. I know that I need a vector image, but im not familiar with vectors as I usually use photoshop. I tried using a photoshop brush image, a simple paint splatter in which I was just going to tween to a larger splatter but like I said the image looks blurred because itsa bitmap.
another newbie question, but when you make an animated button, is the background included in the animation? Like lets say I import a button, give it an animation to glow on rollover or something, if i went to use that .swf would the background that it was placed on show? or would it just be the animation that shows on the default web browser background.
I have a map of the UK with all the counties and i was wondering how I would go about making a rollover flash movie. I specifically need it to highlight the county when the mouse is over that county and a little box to appear with the county name in it. Like an ALT tag I dont want someone to tell me exactly how to do it just some tips on how i would go about this. Is there an image mapping tool in Flash. Or how would i go about marking out the coordinates for each of these areas.
make a photo gallery that, when a photo is rolled over, enlarges that certain image and text appears. did a search in the forum and found something similar i have never used flash before, and i would love a good tutorial.
I want to make a drop down list menu which open when mouse-over not click as you can see I use
<sropDownList id="dl" rollOver="dl.openDropDown()" but the problem appears when I try to close it.I can't use this rollOut="dl.CloseDropDown()" because It will close too soon(When It open I've tried to move my mouse down to the sub-item but the list will close if I move to somewhere else that's not a list base so I can't select the item on the list because it close before I can)
I have an image contained within a slideshow with a rollover attached to it, when you click the image a larger image within the same movie clip appears. This layer is below my navigation layers for my website so when I click on the image it is below some of the navigation layers and logo. Is there a way to make this appear on top of all of the other layers without actually moving the layer up. I'm using Flash CS3 and Actionscript 3.0.
Previously in AS2, to set the style for a List Component when the mouse was over an item you would simple set it with Code:
setStyle("rollOverColor", 0x000000);
I've been trying to find info on how the heck you do this in AS3, cause the above dont work.i've been playing with the following code, but it does not have a rollOver property
Code:
var tf:TextFormat = new TextFormat(); tf.color = 0x00FF00; tf.font = "Andale Mono"; tf.size = 14;
PS, normally when a programing language is changed, is is done at an easing speed, but AHHH! NO!!! not with AS3, it has changed 101%
i'm making an animated rollover, and i get an output error that says this: Target not found: Target="_root.icon01" Base="_level0" i have no idea what the base="_level0" means.
Ive got a problem with the list component in Flash CS3 (as3). I need it to load an image respective to the label the mouse is hovering on.[code]The "MOUSE_OVER" event is being triggered every time the mouse is hovering over the list.I need it recognise the cell its on and its data.[code]
I'm loading png files on movieClips attached on the scene dynamically (reading an xml file). then i'm making a tween (with actionscript) to scale the container clip on RollOver.
the png file pixelate when the clip is scaled(to 110%).
I have created one static movieclip and in that movieclip i have created "i" dynamic movieclips.On the dynamically created movieclip i am loading swf(Swf consists of a Preloader and then image appears).All these swf values and link(url) values i get by parsing an xml string in the FLA itself...Now the problem starts here...There are links on these dynamically loaded swf's....And I have given static rollover effect on the swf by making image as a button..Now what happens is that i have written onRelease Function in code and in that i m getting link on images(SWF) using getURL in on EnterFrame function and i am not gettin the rollover effects that i have created in static.
I am trying to get the index of an item in a List object on a mouse roll over event (please keep in mind this is not the selectedIndex I need). Heres the code I am currently using: list.addEventListener(ListEvent.ITEM_ROLL_OVER, onItemRollOver); function onItemRollOver(e:Event):void { var itemInfo:Number = 0;
/*This is where I need the Index Number of Item being Rolled over instead of Selected Item*/ itemInfo = list.selectedIndex; txt_Display.text = 'Item Index #: ' + itemInfo; play(); }
For my work i'm trying to get an Array properly into a text field. The array is being taken out of XML and then turned into the array and fed into a textfield. But it shows up like this:
I have a scroll over menu that works great (see code below) But I only want it to work when I scroll over the menu. Right now, it activates and scrolls even when I'm not hovering over the menu. My canvas is about 800x400 and the scroll over menu is only 200x350. I tried: on rollover disable but that did not work.
Quote:
stop(); ym = 5; //function to set the xpos of the movieclip function ypos(bar_length, mul) {
so i am parsing an xml file and each node becomes a button. ifigured out how to make each click work properly, but i can not getthe rollovers to work. with the code below makes it register youare rolling over one of the buttons, but it only shows the rolloveron the last button in my list. im thinking its because i am notreferencing my button correctly, but im not sure what the referenceis because the buttons are created through iterations.
I'm trying to create a menu, where some buttons becomes visible when the user "rollOver" a box the buttons is beneath. Look at http:[url]... menu system, at the main page.I place my buttons within a MC, and gives the MC this AS:
But when I move the mouse over the buttons, they aren't enabled, probably because flash got the idea that the MC is above the buttons, and that the MC is a button.
I used that MP3 player tutorial, I need to be able to have up to 500 items in the list. Does anyone know where I can find help making the list scroll?? Here is the tutorial I'm talking about [URL]
