I am publishing the video over FMS and viewing it on other PC through display video. Now when I stop publishing the video, I am getting the last buffer as still image on the other PC(viewer). I want to know how we can delete that last buffer on viewr PC when publishing stops.
View 1 RepliesFinding faults in my reasoning, or expanding the discussion further. We are benchmarking FMS 3.5.x for live dynamic streaming and we have run across an issue. When throttling the client from a high bandwidth (1500kbps) to a low bandwidth (325kbps) via a bandwidth shaper (a physical firewall) it takes a very long (real-) time for the client to see the new stream-quality.
During the investigation of this issue we have narrowed this down to:
1. when transition is requested from client, the client-side buffer is 1/2 i.e. 4-5seconds.
2. if transition is request on a client with unlimited bandwidth, it takes about 6 seconds for the server to process, find an acceptable switching position and send a "transition.complete" event.
3. on the throttled client however, this event takes much longer.
[Code]...
Should I buffer a live webcam stream?
View 1 RepliesI have a service running off a FMS and I was wondering how I would get a stream to keep downloading the rest of the file even while streaming. For example, like YouTube downloads the entire video while you're watching it, much like Progressive Download does but I want that from my streaming server.Or even better than that, if I could buffer at least 20 seconds ahead of the current stream position. If I use NetStream.setBufferTime(20) - the stream doesn't play until at least 20 seconds has been buffered, but I want it so that it will play even though it hasn't buffered completely, but will keep buffering while streaming.
View 1 RepliesIs it possible to listen to ProgressEvent when streaming?
I want to display the buffer progress by listening to the NetStream ProgressEvent, but the event does not dispatch...
We purchased the Adobe Flash Media Sreaming Server 3.5.
My question is, the client wants to set the buffer to 30 seconds, so if an error is encountered the live feed feed will not be interupted.
Is this set from the Adobe client that is recording the video or is this a setting on the server?
I just had a very bad user experience here: [URL] The Loading... text appears every 1 second. Is it possible to buffer all the video content before playing it? Or at least a portion of the video content when playback, and at the same time display the percentage of video content loaded?
View 21 RepliesI'm new to all this, so please forgive my lack of knowledge My purpose of this is to do high quality video conference. I've set up flash media server, and installed media encoder on another computer, input and output looks very much the same, but on the media player, it has about 1 second delay even on LAN,
is this because of the buffer of the flash player? how can i disable buffer completely?
we are using FMS 2.0. I need to patch the buffer overlfow vulnerabilities. The doc that Abobe supplies with the patch/upgrade releases is confusing. The doc for the 2.0.1 recommends uninstalling 2.0 prior to the 2.0.1 installation. Upgrades 2.0.2 and up do not state this.. However, installing 2.0.5 specifically mentions patching v 2.0 vulerabilities, but does not mention uninstalling first OR that prior patches need be applied...And, finally version 2.0.2 - 2.0.5 do not mention is the patches are cumulative - are they?
We are experiences a phenomena that flash clients connecting to a live (pre recoreded)stream served from FMS (we use 3.5.2), have their buffer grow out of proportionit is alsoccompanied mostly with a complete video freeze, until the browser crashes.(you can expect a crash after having more then 4000 seconds of video buffer active in memory)The more we switch streams via a playlist,the more this seems to happen,Thus, streaming long video feeds keeps the system stable, but when injectingfeeds into a main stream and switching back increases the probability
View 7 RepliesI notice that, when I pause the video, the event "NetStream.Buffer.Flush" is triggered. And according to the language reference: "Data has finished streaming, and the remaining buffer will be emptied.", I have to re-buffer it, right? However, also according to the reference, it shouldn't stop buffering:Starting with Flash Player 9.0.115.0, Flash Player no longer clears the buffer when NetStream.pause() is called. This behavior is called "smart pause". Before Flash Player 9.0.115.0, Flash Player waited for the buffer to fill up before resuming playback, which often caused a delay.I'm using Flash Professional to do the debugging, and the traced version number is: MAC 10,0,22,91, and the streaming server is FMS4
View 3 RepliesI have buffer of video and want to pass it to server and then republish it to the client and display that as live video.
View 1 RepliesI'm currently working on a webcam recorder to record high quality video. I had the recorder working before, but the video quality was quite poor. Instead I'm trying to use a client side buffer and then upload the buffer after recording has stopped. I thought after I unattached the video and audio from the NetStream that either a NetStream.Buffer.Empty or NetStream.Record.Stop event would be sent when the buffer was finished uploading.
What is actually happening after I start recording is two NetStream.Record.Stop events are being sent in a row, so recording never really happens. Also, on the server side I'm trying to save a user name and password into a variable, but I'm not sure how to go about doing that since the application script is just a bunch of callback functions.
I need to increase my buffer size in FMS. My video is running from RTMP and I faces the problem to load. Video stalled between the running. So I need to increase buffer size for running video smoothly.
View 1 RepliesI am developing a C++ program to connect FMS via RTMP, and then publish a live stream I can't use FMLE here because I need collect the H.264 NALU from somewhere and forward them to the FMS.I write a demo app, which parses H.264 encoded FLV file, and send the VideoTag in the FLV as RTMP Message content for publishing.Finally, I make it run and I can see some frames of video!But the problem is: The video does not play smoothly and it just updates some frames.
Then I looked at the NetStream event and found that:Everytime when there is a NetStream.Buffer.Full event, the frame in the video is updated and display correctly But immediately there is another NetStream.Buffer.Empty event followed and the video is frozen.
[code]...
I'm sure this has been asked and answered a million times, but searching for "application" "buffer" "cache" "live" and "hls" isn't giving me any answers, so let's get to it. After I end a live stream (which I do using FMLE 3.2 and FMS 4.5) and I then start a new live stream with the same application name, the HLS stream just loops the last 30 seconds of the old stream. To prevent this, after I end a stream, I have to go to applicationslivepkgstreams\_definst_ and delete the buffered data there. Only then can I start a new stream with the same name as the old stream. Now... that can't be normal, can it? Is there a switch somewhere I can set to tell FMS to cut it out and stop buffering old streams?
View 1 RepliesWe have a webcam/chat application that is having bad issues with the video display of a live stream. The application is a bit old (Flex 3.2 recompiled to FB 4.5) and uses FMS 4 which gets it`s encoded streams from FMLE 3.2. The problem is that when a stream is sent using H.264, the playback in Flash is quite bad. Visually, it basically looks like Flash does not always display the "in between keyframes information" properly. Big square pixels from the last keyframe appear instead.
View 3 Repliesdvrcast is a live service.mp4: as the service record and I look over to the dvr sample player debug output messages while out NetStream.Buffer.Empty will stop.Screenshot is shown below. Is it possible to do without stopping the service?
View 6 Replieshow to set the buffer time for a media component. Like the mediaController or Display?
View 2 RepliesCan Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesI'm trying to troubleshoot a Flash Media Server working with a little video playback application I wrote a few years ago that has suddenly stopped working.I'm using CS3/Actionscript 3.My app uses the FLVPlayback Component, and was working well last time I checked. I recevied a report that the videos stopped working, and have been looking into it.I figured I'd add a bunch of event listeners to the FLVPlayback's ncMgr.netConnection so I could get debug info on things like io errors, net status, etc.The problem I'm running into is that the netConnection is null when I set it to anything on my Flash Media Server, and adding any event listeners to this netConnection throws errors.Here's what I've tried so far:
Playback of a local FLV file works fine.In the FLVPlayback documentation, I found an example and stole the URL of the stream they were using in the example, and that works fine, although it is an HTTP protocol stream rather than RTMP.Any attempt to access FLV files on my Media Server, which has worked fine in the past, basically cause the FLVPlayback object to sit and hang in "buffering" mode and never progresses beyond this point.The netConnection object in this case is null.Here's my code:[code]........
Again the purpose of this is to troubleshoot the video streaming from the Flash Media Server, and it seems like there is no netconnection to the server being created.Does this mean that the server is not working, or is there a problem with the way I'm trying to access the content on the server?This was all working fine before, and I have set up the server-side application .ASC files and such to allow things to work fine on the server end.
How can we automatically configure edge from the admin console of flash media interactive server?
View 1 RepliesI would like to know the number of connection allowed in the free developer ediiton of Flash Media Server.
View 4 RepliesI'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
I have to a problem using the Flash Media Interactive Server Feature Explorer. I want use the sample: RecordStream. I can see the instance "RecordStream" in console FMS 3.5. and show me the video in app AIR, but does not save the .FLV in my server.
View 6 RepliesApply the security patch found here:http:[url]............For more information see the followingresource:CVE: 2009-1365
View 1 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesOur flash media server stops taking connection sometime. Any one have any idea about sophos antivirus?
View 8 RepliesWe purchased FMIS and we are encoding large 15+ hour MP4 recordings using flash media encoder. When opening these large files for playback, which have not been opened recently the player displays the loading indicator for up to 4 minutes! Once it has apparently been cached on the server it opens immediately from any browser even after clearing local browser cache. So a few questions for the experts
1. Why is it taking so long to load the file. Is it because the MP4 metadata is in the wrong format and the file is so huge? I read somewhere that Media Encoder records with incorrect MP4 metadata is that still the case?
2. Once its cached on the server, exactly how much of it is cached. Some of these files are larger than 500mb.
3. What fms settings do you suggest I change. FMIS is running on windows server R2 64 bit, but FMIS itself is 32 bit. We have not upgraded to the 64 bit version. We have 8GB of ram. Is it OK to set FMS cache to 3GB. And would that only have enough room for 3-4 large files, because we have hundreds of them.
is it possible fast forward, rewind video in flash media server through flash action script ?
View 5 Replies