Media Server :: Live Webcam Broadcaster And Receiver?
Jul 17, 2009
I have implemented an application for webcam broadcasting and receiving. I have tested the application using a developer version of flash media server. Thus its working finely. Also i am recording the stream and storing it in the application folder. The recording feature is implemented with the broadcaster. Every thing works finely while i checked locally.
Now the client installed media server and I tried to set every thing in the server. I placed all the files in the server and created a directory with the name "live_test" in the applications folder inside the Flash Media Server folder. Then I run the application. Thus the status is showing as NetConnection.Connect.Failed.
View 1 Replies
Similar Posts:
Oct 9, 2011
No I have installed fms4.5, but I can't find good docs how to set something like this up. In Learning section I saw a lesson, but this one isn't ready.So I want to publish using flash and the subscribers to the livestream can be iPhones or Browsers.
View 13 Replies
Aug 20, 2009
Should I buffer a live webcam stream?
View 1 Replies
Apr 26, 2010
I want to make a live webcam or audio broadcast for a user(not a chat or conference).For example a user will broadcast live and people can be able to wacth it when open that user's page. But what is the meaning of 10 users limitation of FMS? If I open a live webcam, Does it says max 10 users can be watch it?
View 5 Replies
Jun 10, 2010
I am trying to broadcast live video using a webcam. I am using the developer version of FMS3.0. Actually i have a working code of webcam broadcasting, which i used before. But now i am using a free version of FMS3.0. When i tried to connect, the following error is showing:
"NC.onStatus> info.code: NetConnection.Connect.InvalidAppNC.onStatus> info.code: NetConnection.Connect.Closed"
I am trying to connect with [URL]
View 10 Replies
Dec 9, 2010
I have installed flash media server, flash cs5, media live encoder to be able to view my webcam feed via my website. Now in addition to these, i started streaming to localhost, and installed a dns updater which updates a name server according to my current ip. Then i wrote this dns address in the feed's source from flash 5 as rtmp://thednsname.somedns.net/live/livestream
so far so good, i also forwarded the ports 1935 incoming and outgoing from modem to my computer as well (because 1935 is said to be the default port number for media server). firewall -> closed (just in case); and my internet provider doesn't block ports...started the media server (with admin privilage in 7), started the live encoder, connect to localhost, start live feed.
NetStream.Play.StreamNotFound : Adobe Flash tried to play a live or recorded stream that does not exist. Source can't be found.
View 1 Replies
Apr 26, 2010
Can I send/publish MP4/H.264 video (live or record) to FMS from webcam? Another similar question; does Flash (10?) support H.264 encoder?
View 3 Replies
Oct 13, 2010
How would I go about adding chat to FMSS during live webcam broadcasts? I will be using FMSS to broadcast webcam.Obviously it is an outgoing stream only as I am told to do cam to cam I need FMIS and at present I do not need cam to cam and I can not afford FMIS.I want the viewers of the webcam broadcast to have a chat window where they can send comments to the person on the webcam and the person on the webcam can type back if they want to.I have glazed over some posts here and saw that it can be done in Flash, I want to know if I can do it with FMSS. It does not need to be elaborate.
View 2 Replies
Dec 10, 2010
Server conf:
2 x Intel(R) Xeon(R) CPU L5410 @ 2.33GHz
16Gb RAM
2 Gbit ethernet channel
OS - Linux CentOS 5.5 x86_64
FMS4 Interactive
Live stream parameters:
320Ń…240 qua_=87 bw_=200000 kf_=5 fps_=18
So, after approximately 600 connections to one stream video becomes choppy (periodically freeze, slow motions). CPU-usage at this time is 100-120% (maximum is 800%, 100% per each core), network usage is 500 Mbit/sec.But second live stream(with few connections) at this server looks fine simultaneously with 600 connections at first stream.Experiments with recommendation in "Configuring performance features" documentation chapter(enabling/disabling aggregate messages and configure the size of stream chunks) do not help.
View 2 Replies
Jan 30, 2011
I have been working on a Flex application that sends a feed from my webcam to the Flash Media server. The application connects to the server fine but for some reason the camera is not sending anything to the Media Server. I am pretty sure that the answer to my question is really simple but I need another set of eyes to llok at my code and tell me what I am doing wrong.
[Code]....
View 3 Replies
Jan 8, 2012
Is there any way that I can get the IP address of the broadcaster? In know how to get info from the XML file about online channels and online users but I have not yet found the right place on how to get the IP address of the broadcaster.
View 4 Replies
Dec 2, 2009
how to publish live video feed from webcam in h.264 format non VP6 format with FMS 3.5.2 without using Flash Media Live Encoder, and how to set all parametersto have a good quality and smooth video without interruption, i have a server with 50Mbit bandwidth output enough for a publisher and 10 clients meunderstand this thing's been months since I try but the quality ugly
View 1 Replies
Jan 3, 2010
I would like to know if there is a solution available that allows me to plug 2 HDV cameras into a laptop and live switch between the 2 cameras while uploading the live stream via adobe flash media live encoder to the adobe streaming server? the scenario is I want to offer live streaming of corporate seminars that I normally shoot with 2 cameras.
View 1 Replies
Jan 14, 2010
I am trying to replicate the deinterlace functionality that is available in FMLE in a simple flash broadcaster that is hosted on my website. I have built a flash broadcaster (using Flash CS4 and AS2) that connects to my FMS server with the aim that people can stream live video to the site. That all works OK; however, I would like to be able to implement a deinterlace option like that which is available in FMLE.
View 1 Replies
Aug 23, 2010
I have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 Replies
Feb 3, 2010
I'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
View 30 Replies
Aug 31, 2010
I am working on streaming programs through "Adobe flash Media Live encoder" in my website.The steps that i done for streaming is
* Installed Adobe flash media live encoder
* In the FMS URL entered as " rtmp://myserver ip/live "
* In stream given as "livestream"
* when i click connect the follwing error is displaying " Invalid primary FMSURL "
The website i am going to implement is [url]... which is done using PHP. Is there anything i have to do in coding to connect the media server.
View 1 Replies
Jul 19, 2011
when i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 Replies
Sep 29, 2010
where to start looking if I want to try and broadcast a live webcam on a webpage client to server to browser?
I want to be able broadcast a live webcam from a machine in location x to a remote server at location y and for the server at location y to display it on a webpage.
I have posted on here before as acidman but can't remember my password!
View 2 Replies
Oct 26, 2011
I have a FMS 4.5 with (License) and is set up and running fine, now I want to stream Live to the IOS Devices but no luck. I have a web page for test purpose with the video src tags to: URL... and in the server I have a livestream.m3u8 pointing to the same URL..., Now the Encoder have the AAC plugin and all the presets like it shut but when I go to see it in my IPad 2 this is how it looks.
View 11 Replies
Nov 22, 2011
We have a Red5 Server that we use to host a video chat. We are looking for a way to overlay SWF files over the top of a live stream video.For example, we could overlay an SWF animation of snow falling in front of a live stream from a webcam.
View 1 Replies
Jun 11, 2010
I m a begginer with FMS. I have a licenced version of FMS and I want to stream a live video from the Localhost or another machine with camera. And then then I should broadcast it to many clients. I don't know how to begin
View 12 Replies
Nov 14, 2011
I'm new to Adobe Flash and I'm just trying out the Flashe Media Server 4.5 to stream live video on a local machine. I'm using a FLME 3.2 to capture the video from my digital camera, which works fine, and I can connect to the server with no worries as well. But I have issues streaming the content in the Sample Video Player that comes with the server.
[Code]....
I've also tried playing some sample videos on it. it even refuses to play those. What could be the problem??
View 6 Replies
Feb 15, 2011
I am developing Video Chat over Ip (including audio and text too). But I am unable to get the proper startup material for my desktop application.
View 2 Replies
Apr 28, 2010
One server - is streaming server with Flash Media Interactive Server 3.5that host the application with asc files in FMS application directory.Second server - is the IIS web server that host thehtml,aspx,swf etc.. files.So basically i heve swf file on one server that have to connect to live streaming via rtmp on different server with different ip address.I did not find any clear explanation on this crossdomain rmtp issue.ys only HTTP can use crossdomain.xml policy filebut not rmtp.So what policy security procedure need to be done in order to enableswf file hosted on one server to connect and show rmtp live cam broadcasting from another server?
View 2 Replies
Apr 12, 2010
I could contact about building a custom live Flash media encoder for our website. We have a database for authentication and a list of upcoming events with stream information (FMS URL and Stream Name) that we want to automate into an encoder. Currently we have our customers use Flash Media Live Encoder and copy/paste the values into the encoder, but would prefer a solution that is more tightly integrated with our site
View 4 Replies
Aug 19, 2011
Has there been any further discussion regarding restricting who can stream to FMSS (not FMIS or the development version).
I found this article, but I don't know if this was ever fully resolved:
[URL]
I don't want just anyone to connect to my server to stream live. I want to restrict by IP address, authentication, or any other means.
View 7 Replies
Mar 30, 2012
'URL missing from Media tag' on FMS4.5 HTTP Live Stream playback.I have spent a whole day trying in vain to publish f4m live http streams from FMLE using FMS 4.5, and almost everything I try results in the error .The F4M document contains errors URL missing from Media tag...in both Flash Media Playback and the fms videoPlayer app.Other people seem to have seen this and solved it, but I've found nothing that helps. I have tried to publish a single stream, and with multiple bitrates. For the latter, I followed the Adobe video tutorial as follows:
Multiple bitrate live
================
I'm publishing 3 streams from FMLE, using
FMS URL: rtmp://[serveraddress]/livepkgr[code]..........
View 1 Replies
Jun 26, 2010
I am using Flash media live encoder 3.1 to broadcast to flash media server.
Its is possible place a image logo with the media live encoder??? How i can do this?? I like that my broadcaste have a image logo.
View 1 Replies
Mar 30, 2011
I have installed the Authentication Add-In on a FMS 3.5.5 Development version, running Windows 2008 Server.I can easily get to the users.exe command prompt and add users with no problem.BUT, when I open the Flash Media Live Encoder and go to enter a username/password when connecting to the server, I keep getting "User Not Found".I've went back several times using users.exe and tested for my user credentials and it always states that the user is there.
View 1 Replies
