Actionscript 3 :: Flex 3 Alert Text Doesn't Stretch To Fill Space?
Aug 27, 2009
I'm trying to display some simple information in an Alert (I'd rather not use an alert, but I need a fast n' simple solution for a project that's got to be out the door asap)
how large I make the alert, my information never stretches out, and ends up being clipped.
I can actually scroll through the text with the mousewheel, but that's no good.
The image says it all. I can't imagine Alert just doesn't handle this.
[URL]
Code:
var myAlert:Alert = Alert.show("The package you have selected includes a feature(s) you've already selected.
We have removed the individual features for you.");
myAlert.height = 150*2;
myAlert.width = 350*2;
View 1 Replies
Similar Posts:
Mar 28, 2011
I have an image that doesn't fill the <mx:Image> tag because it's not the exact dimensions (it is too short) and I have maintainAspectRatio set to true:
<mx:Image id="theImage"
source="{data.photo_thumb}"
horizontalCenter="0"[code]....
The <mx:Image> tag has a fixed width and height (it's 100% of the tile size--this is in an ItemRenderer). How do I get the image to sit on the bottom of the <mx:Image> tag?
View 2 Replies
Feb 4, 2009
I am dynamically loading text into a text area. I want the text area to have set dimensions, but the text itself to resize in order to fill up the whole text area container.For example a short line of text would be made a bigger size than a large line of text but each would perfectly (or near perfectly ) fill up the same X by Y sized text area.I have seen a lot of posts about resizing the text area to comply with text, but I want to do the opposite - resize text to comply with text area.
View 4 Replies
Jan 19, 2010
I was laying out my Flex components using mxml and had them working correctly. But then I wanted to switch them over to Actionscript because I wanted them to extend a base component that provides default functionality.
I've go the code working except that my components that used to fill the entire space using width="100%" and height="100%" appear to display just using the default sizes. Do you know How I can get them to take up the entire space again?
Here is a test component I am playing with that exhibits the problem.
Main.mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" xmlns:bbq="components.*"
[code]....
View 3 Replies
Jun 26, 2009
Im trying to create a layout in flex using mxml, the layout contains a Canvas component and a Box. The layout should always be such that the Box sits at the bottom edge of the application and has a fixed height, whereas the Canvas fills the remaining stage area and does not overlap with the Box. My MXML is as follows;
[Code]...
View 3 Replies
Dec 17, 2009
No matter what I try, I can't seem to fire the click event on the "default" button in an Alert control in a Flex 3.4 application.
[Code]...
View 1 Replies
Aug 14, 2009
I have this script on the first frame of my movieclip:
stage.scaleMode = StageScaleMode.NO_SCALE;
stage.addEventListener(Event.RESIZE, adjustLayout);
adjustLayout();[code]....
?
As you can see, it basically just controls the position of the elements of the site (logo and gallery), and makes the background (square) stretch to fill the browser window. what's the equivalent code in AS2?
View 1 Replies
Apr 29, 2010
I am having an issue where I show an AlertBox message when the user hits ENTER and the focus is in a text area. The pop up works fine, but when the user hits enter the Alert closes as expected, but the TextArea listener receives the ENTER event from the Alert and pops the dialog up again. I have tried a number of ways to catch and eat the event but so far I have not been lucky. Is there way to accomplish this?
public function init():void
{
myTextInput.addEventListener(KeyboardEvent.KEY_UP, handleKeyStrokes);[code]....
View 2 Replies
Jul 20, 2011
I am trying to paste hyerlink in body of mail in outlook by flex application using navigateToUrl method with mailTo protocol.
but outlook breaks hyperlink after first space in hyperlink.
I tried with < ,> before am after link but it doesnot help out me.
Is there any other way to paste link in body mail containing space.
View 2 Replies
Jan 21, 2011
I'm using Flex 4. I'm trying to apply a embedded font in all Alert components of the application, to get the same style that all the app, of course. I code in my CSS file:
[Code]...
The font-family worked to all componentes, but not to the Alert component. In alert the text message and title got unvisible. If I change to other font-family it works correctly, just the embedded font doesn't work on Alert component. Anyone got this problem? Obs: The embedded font worked in all the app, just the Alert no.
View 1 Replies
Mar 30, 2010
I want to create a simple multiline Alert popupAlert.show("Blah\nBlah")shows BlahBlah when what I really want is two lines, one Blah each.
View 2 Replies
Mar 23, 2012
I want to change the text in the Alert on timer tick, but nothing changes, see example below:
private var alert:Alert;
private var timer:Timer = new Timer(1000, 0);
private funtion init(){
[code]........
View 2 Replies
Nov 7, 2008
I have a 720x576px clip (anamorphic), which I want to encode into a flv with the right aspect ratio (720x405px). In the new flash media encoder, you have three settings.
- Scale to fit
- Black borders
- Change output size
But none of those settings allows me to stretch the video to the right aspect ratio, I always get the file with 720x405, but black borders left and right.
View 6 Replies
Aug 27, 2010
I am using Flex 4 and running into some problems displaying a simple alert box. The alert box shows up, but the text seems to be the same color as the background. I know the text is there because if I mouse over in the alert box window to roughly where the text would be, I can see the cursor change. And when I double click and copy-paste into notepad, I can see the message. But the message, the button text, the message box title don't show up.The relevant code in my project is as follows
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
xmlns:s="library://ns.adobe.com/flex/spark" layout="absolute"
[code].....
View 6 Replies
Dec 20, 2010
I'm trying to center the title text on my Alert control. I'm using the following CSS right now:
mx|Alert{
text-align: center;
}
The problem is that the above code centers my alert content as well, not just the title text. What selector do I need to access just the title of the alert control? I'm using the 4.x SDK and Spark.
Code:
Alert.Show();
View 2 Replies
Aug 29, 2009
I am beginner in flash and I started to learn flash c4 (with video lessons in my language but from flash 8! but it is not problem now about drawing than only about code in actionscript). I have now problem in using of Paint Bucket Tool in flash cs4. I made a ship, I made a whole document/white page for drawing in rectangle tool (frame for picture), and I made to lines which will be like a hill. it is for background, behind the ship. but when I want to color this background, to be green for example, my Pain Bucket Tool don't want to color ONLY place behind the ship and under mentioned "hill lines", than Paint Tool color whole document. therefore I can't make a hill because I get everything colored in green.
I tried all option about closing of gaps. how can I color only wanted places in picture and not whole picture? "hill" is not strait line so I don't know how to select hill space. of course, after it I will have to repeat process to color space above "hill lines", it will be blue like sky. and just to say that "2 hill lines" are from left to right side of document, there is no hole, it is closed line.
View 10 Replies
Oct 20, 2010
If I create a mx:Label or mx:Text control in Flex and then set an opaqueBackground to it, I notice that there is some space around the text.
I would like to be able to get rid of that space to where the text is completely flush to the top and bottom of the label. Changing the gap, padding, and leading didn't seem to help. Is it possible to get the text completely flush to the sides of a label?
View 4 Replies
Feb 12, 2010
Made the part I'm having problems with bold
import com.greensock.TweenLite;
import com.greensock.easing.*;
import fl.containers.UILoader;[code]....
stage is set to 700 height/850 width, and I've tried that too, but to no avail. Here's a link to how it appears:[url]....
View 1 Replies
Nov 2, 2004
Im trying to fill the landscape with a colour but doesn't seem to work.. ignore the no with statements that was for testing purposes Attached Fla
View 5 Replies
Nov 26, 2010
This sounds quite ridiculous but my space bar doesn't want to work in Flash CS3. I'm a web designer and started recently for a new company. They asked me to include a flash image on one of our websites. When I try to add text to the stage, I can't make spaces. That is all. I've used flash before and I've never ran into this problem
View 2 Replies
May 7, 2010
I made a particle generator that spawns bubbles... the particle spawner is a movieclip and all particles are children to it... this spawner is then loaded to stage with some more instances of it and they're arranged so that they produce enough bubbles to cover pretty much the whole screen...
So far so good... the trouble is that this project is meant to be projected into a hologram, and needs to be positioned, rotated and distorted to fit the irregular projection space...
My idea is to just leave the particle generating swf as it is and load it into another swf, then do all the positioning and rotationing as if it were a movieclip... My knowledge of Flash and the way movieclips have they own local spaces tells me that this has no reason to not work... but apparently, loaded swf's have a mind of their own...
I'm loading the swf using the UILoader component, which seemed to me the easiest way to get it working, since it doesn't need to be dynamic or anything... I just want to position it once, save it at that, and leave it be...
the trouble is that once loaded, the particle generating swf spawns it's emmiters (there are 5) in relation to stage space, and not loader space... so it doesn't respect it's boundaries or orientation...
I've tried all possible settings of the UILoader parameters... none seem to work with an swf that is creating movieclips at runtime...
Does anyone know why this is? I'm probably missing something stupid here... I'm feeling rather dumb today... yesterday I created the whole particle emmiter and bubble physics in 2 hours, but today it seems my head doesn't want to go and I'm stuck with this rather silly problem...
I tried placing the UILoader into another movieclip, so that any loaded content would be inside that movieclip's space, but it just doesn't respect any orientation... btw, I'm not rotating it by code... yet... I was trying to get it working using the editor, which would indeed be much faster and simpler.
View 5 Replies
Mar 31, 2009
Well I'm tweening a movieclip using actionscript and (as you probably already know) if you don't embed the font, the textarea won't tween beyond x/y movement. If you embed, you can stretch it, alpha, etc. On the upside if you don't embed + you're tweening the container mc of the text box, it won't warp/stretch the text, instead it will just shrink/grow the available text area. Is there any way to get this effect while still embedding the font?
View 1 Replies
Jul 22, 2011
How columnstretch and calllater work but I couldn't get resizeGrid function worked. [code]...
View 1 Replies
Nov 30, 2010
I need to check whether the string doesnt match any number of space characters, or tab.
[Code]....
View 8 Replies
Mar 22, 2012
I want to develop a hair style app in adobe flex. In that ,the wigs should be placed in right position.So i want to adjust the wigs in x and y directions.
how to stretch an image in x and y direction?[url]...
View 3 Replies
Nov 12, 2009
How to stretch out the movie clip to twice its width and height after applying some Pixel Bender filter? I have some object with video on it (for ex 512 by 512) I apply a Pixel Bender Filter on it. Now I want to stretch the result (for ex to 1024 by 1024). How to stretch it?So my point is 1) Render the result of effect2) Stretch out the result
View 2 Replies
Sep 19, 2009
I have to creare a javascript alert that will show the value of a flash input text box when i press on the flash button next to it.
i have created in the editor the input text box and the button, and use the following script on the button [code]...
View 2 Replies
Jan 14, 2009
I want a flash animation of an Xbox achievement to use as an incoming test message alert for my mobile phone.
I found this site that lets you create an achievement but after spending hours trying to figure out how to download it I am now stuck.[code]...
View 1 Replies
May 21, 2011
Alright so lets say I have a number of movieclips or text fields or something with instance names test1, test2, test3 and so forth. Now say I want to fill these text fields with text that I have in an array and I want to do this with a loop, how do I do this? What I'm really asking is if there is a way to use a variable in an instance name if you catch my drift.
[Code]...
View 1 Replies
Jun 13, 2011
I have the following code layout in mxml. The button will be positioned correctly in the middle, but the text remains anchored to the top. This is not the behavior of the spark component label, but I need multiple style runs in the text and have found the mxText component to be the best solution...
<s:Group>
<s:layout>
<s:HorizontalLayout verticalAlign="middle" gap="0" />
[code].....
View 1 Replies