Is it feasible to play a number of FLV files at the same time on one SWF? Basically I have a brief to create a video banner with a number of FLVs of people playing at the same time but starting at different points in the videos. My concerns are with loading times, memory consumption and the starting of each FLV at a different point and looping it.
View 2 Repliesplay a number of FLV files at the same time on one SWF? Basically I have a brief to create a video banner with a number of FLVs of people playing at the same time but starting at different points in the videos. My concerns are with loading times, memory consumption and the starting of each FLV at a different point and looping it.
View 1 RepliesI am currently working on a flash project that need load and play 5 different external Flvs @ the same time. the flv files are between 2MB to 36MB. I am using AS to dynamic load them into the main SWF. it works locally on my laptop but when I upload everything on to JustHost, only the smallest one shows and start to play.
View 1 RepliesHow can I add a single control bar to control 2 external FLVs inserted in FLA document so that when scrolled, both FLVs move simultaneously?Is there a better PPT to Video Converter out there than Moyea that I can purchase or even a freeware? Original documents One FLV is a PowerPoint presentation with videos in some slides, converted into FLV using trial version of Moyea PPT to Video ConverterAnother one is an AVI converted into FLV using Super
I saw a similar question posted on Aug 15, 2007 ([URL].. but the "Look Here" link that describes the solution is not available (removed by Adobe for security reasons).
I would like to play two videos (progressive), on top of each other. Nothing serious. But the second video contains multiple counters that has to play synchrone (with other words:simultaneously) with the first video.The second video (which is much smaller than the first) will preload much quicker and thereby starts playing earlier than the other video. Is there a way to start the video's at the same time and play them in progressive mode? (embedding is not an option because of the large filesize)
View 1 RepliesI'm creating a video player that have 2 ways of playing the video file. 1st is by streaming. Will play the file directly on each click/ 2nd, is by preloading the video. And only plays it when its fully loaded. But while its preloading, I could still able to click on others video as well to preload the videos and put them on queue for playing.
Currently I'm on the 2nd stage. The problem I'm facing now is it only plays the sound bout not the video. And it overlaps. I'm not sure I have to duplicate the NetConnection or NetStream like how we usually do to duplicate some MovieClip.
ActionScript Code:
public function set newVideo(v:String):void
{
currentStatus = "play";
[Code].....
I have a Flash CS3/AS2 project containing swfs with FLVs. When I Publish the "START.fla" which pulls all the files together, I tell Flash to create a "Projector" for Mac and an "EXE" for Windows. On my (OS X) desktop this Projector thing works perfectly...swfs open from a menu in my GUI, the swfs reference flvs and the flvs play. The swfs are in the same folder as their flvs.
If I put this whole folder full of files over to the WinXP box (via shared folder), double click on the EXE - no flvs will appear. Everything "leading up to" an flv works - but where there should be a video there is none. Moving on I burn the project onto a CD. When I open the CD on the Mac and find the Projector - I double click and it still works great. Everything flawless.
I put that same CD into the WinXP (SP3) box, find the EXE and double click. As I expected - no improvement, the GUI opens,the swfs can be launched from the menu, but no flvs appear. I get the swf that references the flv - but no flv. I even waited extra time thinking it would eventually happen. No. Why it should work on Mac and not on XP? Where should I look for the glitch?
I am working with the open source flash player at [URL].. and I am trying to figure out how to limit one sound file at a time. I know this has been done on a number of sites but I am unsure how to approach it.
Scenario: A page has five different instances of the flash player. The user is litening to one song but clicks on another to listen to it.Goal: The first audio file automatically stops while the second starts playing instead of both playing at the same time.
Do I need to have some sort of javascript handler than interacts with the swf or something?
How to play flv's from Action Script2 one after another? Let's say I have 3 clips .flv. And I want to play them one after another.
In case I'm writing this:
myFLVPlybk.contentPath = "1.flv";
myFLVPlybk.contentPath = "2.flv";
myFLVPlybk.contentPath = "3.flv";
Only the last clip is playing actually. How can I implement "one after another"?
i need to play two FLVs continuously one after the other - you might think it's an easy task, but every time i try to do that there is this annoying gap between the videos that flickers, and it's have to be seamless.the ON_COMPLETE event worked poorly, so im sampling the playheadTime of the first FLV and test it for it's end, minus a certain offset value.. but the lag is still there.i ever rewrote the FLVPlayback component to my own NetStream object extending, hoping it will take less run-time memory consuming but noting...and the thing is,the lag sometimes happens, and sometimes don't..when trying to sample the gap it brings me different values every time, but there is no way to correct it,because changing the playheadTime causing a random, few milliseconds lag itself, and we are back to square one..
View 3 RepliesI have five videos that play on command when you click one of five buttons. I want to make two enhancements to this script and I need an expert's help (because clearly I'm clueless!).
#1 - Even though I have the vidPlayer (aka flvPlayback component) setting set to "true" for autoplay, the area where the videos are set to play remains blank until clicking on one of the buttons. How can I get the first video to truly "autoplay"?
#2 - I would like to have the videos play in sequential order when the last video is finished, then stop after the last (fifth) video has played. How can I get them to play back-to-back?[code]...
I have single FLV file which is quite big. I want to encrypt it and decrypt but it takes too long. My best idea was to split video into smaller videos using third party software and apply my encrypting and decrypting functions to each one separately. Unfortunately I have a problem with gaps between loaded FLV files. Video has to be smooth without any pauses.
View 0 RepliesI am having trouble getting my flvs to play incrementally. I can only get it to play the last flv in my array.
Code:
_root.stop();
//
vidList = new Array("item_overview_ae476x264768K.flv",
[Code]....
I am creating a flash "video jockey" station. I have 9 videos that are different parts of a song. Each video is loaded upon the loading of the swf with a volume of 0 . When the buttons given are pressed, they unmute and expose the video. I have it set to a 36 second loop. I have coded in a rewind for each video. When I export it for html, the rewind and play no longer matches up. I feel like there may be a simpler way to code what I am doing, and a way to say that all videos should match up based on their location within their 36 second play time. I have included the actionscript3 I have written for two of the videos. Imagine this with 9 total videos and background music all having the same rewind function.
stop();
import fl.video.*;
var pb:FLVPlayback = new FLVPlayback();
pb.source="videoOne_2.flv";
[Code]....
I have 3 videos to load into a single flv component. I want to be able to load these movies randomly. How would I go about doing that? I have no idea how to start
View 1 RepliesAny input on precaching multiple flv's at once to make sure they all play properly at once? Fairly small filesizes/resolutions/compression all around. I'm open to ideas. I plan on using a preloader to go from 0 to 100 as the videos precache.
View 1 RepliesI have a presentation that runs fine when its being playednormally, but when I try to get it to go into full screen mode witha button click it goes black and won't load the videos.Somehow in the past I was able to see the errors, but now Ican't get the same error to pop up.
View 1 RepliesI have a folder of sales training lessons (flvs) and I want to play each one of them by clicking a button and to have each one use a common playback control. When I us the follwing code I get a "1120: access of undefined property error".
stop();
function playAud1(evt:MouseEvent):void { player.source = "audio/The_Profession_Called_Selling.flv";}seg1_btn.addEventListener(MouseEvent.CLICK, playAud1);
[Code]....
I have a series of flvs with embedded event cue points at end of each one. I want to play them continuously by using the cue point at the end of one flv to trigger the following flv. How can I do this?
View 0 RepliesI have a main file that loads externally a bunch of flv videos. I'm using ApdevVideoPlayer as the player ([URL]). There are no playback problems when I publish swf file. But not when I publish a projector to be fullscreen. As soon as the flv video plays, it becomes huge (kind of like full screen). I want it play in its original size. I changed the "fullscreenTakeover" to be false but was still getting the same problem.
View 1 RepliesOn my main timeline i have some buttons. When you click a button you are diverted to the a frame label on the main timeline.
When the timeline stops at say frame 2 an flv is loaded into an empty movie clip on the main stage. If you click on button 2, same thing. So in total I have about four FLV's that play when a button is pushed. If i keep clicking my buttons to test the smoothness of my flv's, after about three clicks from navigating between my frames/loaded flvs, my entire main movie becomes slower.
Each FLV is about 5mb.
Below is the code that gets initated when I click my button and am taken to that frame. My question is this, if i'm jumping between FLV's at every button click is the FLV that played first still playing and causing the entire main movie to slow down? Is there a better way to manage this? Do I have to unload the movie being played when i click? I'm trying to see if there an more efficient way to have smooth streaming from my flv. The flv that is getting initated is simply looping when it's done and servers a 'moving background'.
is there something else i can implement into my code that will keep my loaded flv's playing smoothly?
[Code]....
I have a variety of FLV files I wish to playback randomly within my Flash web site, so every time the page loads it could load any of the 6 files for example. I have created a MC for them to playback within, how can i use action script to select one of the files located in a folder at root and play it? Its my first post and I am quite new to Flash, using Flash 8 Professional. I look forward to hearing from you,
View 4 Repliescode that will load and play a folder of flv's continuously?I have a folder of short clips i converted to flv. When one clip finishes, i want the next clip to play and to endlessly loop through the flvs, never stopping. If there's a way to include a transition, that'd be cool too, but not important. I've got the first clip loading, but can't get the next to play.
Code:
var video:Video = new Video();
addChild(video);
[code].....
I'm having a problem with Flash Media Interactive Server 3.5. I have a simple application setup. I would like to simply to be allow the user to record multiple flvs. This is just because we want them to record, preview and either publish or try again.
[Code]...
to start and stop recording. The problem I'm having is that while the first record seems to go ok, the second gets garbled. The video starts about 70% through, and then just plays a small portion. I've tried meta injection to fix it up, but it's just not working. I'm thinking maybe I have to reset the stream or something before starting a record again, but I don't know how.
I've an SWF which loads dinamically six FLV files controlled by actionscript code.My goal is to guarantee a smooth playback, so I've to do a global preload of each file.So, I've created an array. Each element of this array contains a custom objecte named PreloadFLV that contains a reference to a NetStream object in a field named flv_ns.To process the preloading, I do before a NetStream.seek(1), then NetStream.pause() and then with a Timer I check the percent progress.When the percent progress is equal to 100, I start the clip.This is a small piece of code:
preload_flv_array[queue_preloading].flv_ns.play(preload_flv_array[queue_preloading].path);
preload_flv_array[queue_preloading].flv_ns.seek(1);
preload_flv_array[queue_preloading].flv_ns.pause();
[code].....
I have 3 flvs, that are rather big in dimension, that I am using as backgrounds. When I use any of these flvs my movie works fine but when I switch to a new background my movie takes a big hit in performance. I am guessing this has something to do with the garbage collection in as3 because i explicitly get rid of the old background. What is the best way to cycle through multiple flvs without loosing performance?
Heres code I am using to switch backgrounds
removeChild(theBackground);
theBackground = null;
theBackground = assetLoader.getBackground(level);
addChildAt(theBackground,1);
[Code] .....
I've searched around and havent really found anything definitive about this. Im trying to preload five flv files and then get them to play one after the other with as little pause in between as possible. Im thinking I might need to create five netstreams and then pause them, check to see if theyre loaded, start playing then first when they are with the others hidden, then after flv one is done show the container for flv two, etc. Ive done a test and I still get a bit of a jump in between flvs. Has anyone done then and got it to work without that hiccup?
View 1 RepliesI have two FLV's that I have playing back to back. They use the following code, but I'd like to add the video controls/controller to the player, which I'm not sure how to do. This is what I currently have:
Code:
var videoList:Array = ["20120331_102028.flv", "20120331_102102.flv"];//we also define the currentIndex here:
var currentIndex:int = 0;
[Code].....
Unlike a typical FLV import where you can add the particular video controls that you prefer, I'm not sure how to add that manually via AS. What would be the best way to do this? I'd obviously like to be able to control volume and have a timeline scrubber that will work on both videos.
I made a game as the same site URL..Anyone knows how to prevent user open and play game on multiple browser windows at a time?I used flash control to embed flash into aspx page and connect to sql server
View 4 RepliesI'm testing Live streaming with FMSS. The stream is pushed to FMSS buy Adobe FMLE software. Streaming works fine until I reach 1300-1400 simultaneous connections.No matter what the encoding ratebit is (150kbps or 2000kbps) the stream is no longer play from time to time (5-8 seconds).
The CPU (2xIntel Quad) is loaded less than 20% and memory used is about 2 GB (there is plenty of memory installed 32G). The OS is RedHat 5.3 64bit platform. Network uplink maximum rate is 4Gbps.I disabled the Queue but the problem still persist.