Actionscript 3 :: Use Frame Scripts On Loaded Swf Animations?
Oct 5, 2010
I'm trying to use addFrameScript() on a SWF animation I have loaded but am running into a few problems. Here's what works right now:[code]Like this, the animation plays fin and just loops over and over again. The trouble seems to be that the animation runs regardless of using stop(), play() or any animation function. A trace(anim.totalFrames) also shows that my animation is 2 frames rather than 23 (which it is). When I un-comment anim. add FrameScript(anim.totalFrames - 1, animEnd); the frame script appears to be called every frame and the animation ceases to play and is instead replaced by the flash "loading dots" where it should appear.Am I loading in my animation properly and why does a framescript cause my animation to disappear?
View 2 Replies
Similar Posts:
Sep 23, 2008
I want to to have 3 x 3 Frame Keyframe animations (very simple) with a title keyframe in between each one. What I am struggling with is that instead of repeating the keyframes lots of times and having a huge project I want to repeat each 2 Keyframe animation 30 times (making it a minute long) before moving onto the text keyframe and then the next 2 keyframe animation to loop 30 times before moving on... I then want the whole thing to loop.
What code do you use in Flash CS3 (ActionScrpit 3.0) to acheive this for each set of keyframes? To keep it simple they are all one one layer.
View 1 Replies
Oct 4, 2011
I've a MovieClip symbol with 5 frames (let's call it the main MovieClip), each frame holds a different MovieClip symbol and each of those symbols has a small motion in them. If let's say I move to the 3rd frame in the main MovieClip: object.gotoAndStop(3);Then symbol's small motion animation, which frame 3 holds, automatically starts as I saw. So I'm thinking here do the other frames (1, 2, 4 and 5), which are not visible on stage though, are stopped and I don't need to worry about stopping each of them myself (like attaching code to each 1st frame to call .stop()) ?Because if I would now call right away object.gotoAndStop(1); it would start that frame's animation right away.
View 1 Replies
Jul 14, 2006
I have an animation that runs into 100 frames. How can I make the animation that occurs after 45 th frame repeat itself rather than going back to first frame in a continuous loop playback?
View 10 Replies
Jun 17, 2009
I have code that loads an external .swf files into my main.swf. Each of the external .swf files has a close out button. When that button is clicked, it calls a function that supplies close out animations for the movie clips for any .swf that is loaded. All code is in main.swf. There is no code in the external.swf(s)
Each external .swf has it's own set of movie clips. The "closeCurrentSWF" function has animations for movie clips that are within .swf files that may not even be loaded, yet I get NO errors when this function is called...which is great!! I'm so stoked this works, why flash isn't throwing me an error...
Code:
//Load External SWF//
var _swfContainer:Loader = new Loader()
_swfContainer.contentLoaderInfo.addEventListener(Event.COMPLETE, finishedLoading);
stage.addChild(_swfContainer);
var _externalMovie:MovieClip;
function loadSWF(nameOfSWF:String){
[Code] .....
View 1 Replies
Oct 12, 2005
Im having a tought time here with my text thats loaded from a xml file. It displays fine if its just in a movie clip thats just in one frame, but once i try to animate with the text ( like a side scrolling news header ) the text doesnt display. How am i supposed to work with the text?
View 8 Replies
Jan 26, 2004
on my website, I wanna load different bg animations after my page has been loaded. I don't wanna pre-load because I don't want waiting time. Will loading in this way interfere with anything else on my page such as the buttons actions slowing down?
View 3 Replies
Jan 24, 2012
I have few flash animations that I bought, I got their fla files as well.I modified the animations simply by adding a static text line. I publish the animation and load the swf file to another fla file (main project, which is bigger).The problem is that the loaded animation has a 1 fixel black frame (witch is not in the design itself) and I can't remove it or even mask it through the animation file. I need a clean animation with no background or frame,Other problem is that the loaded animation is getting out of the original file frame boundries, revealing parts that suppose to be out of the stage.How can I publish thouse animations without the frame and the out of boundries area?
View 2 Replies
Mar 16, 2009
I've been successful to load a external swf using the loader. Lesson_mc is a movieclip I have on stage that I am loading the external swf. I have some masking that is there, that is why the movieclip. myLoader is a Load object. I can find the swf loaded using the debugger and see the currentLabel and Frame but when I try to get the information it sends a DisplayObject error. I have a Menu in the Main Window that controld the navigation. Getting to the frame on the first click works but trying to go to a frame within the same sef does not. Any thoughts?
myRequest = new URLRequest("overview09.swf");
myLoader = new Loader();
myLoader.load(myRequest);
[Code].....
View 11 Replies
Apr 8, 2009
anywhoo i have minimal actionscript training tho i know a bit... im trying to make an Item system were i make an object like a key or a helmet... and if i collide with it it disapears. and i get the item, then somewhere put _root.playerMC.standing.gotoAndPlay ("item"); .. maybe in the item i dunno..
so basically i set my characters up like playerMC then in that animation i have a body head arms and legs.. and in those i have different items equipped on each body part on each frame how should i set this up!!!.. i cant call those items deep in the animation the farthest i can go is like Playermc.gotoandplay ("walk") when i try to do like.. playermc.walking.head.gotoandplay ("item") it doesnt work..
View 3 Replies
Sep 21, 2004
set the frame rate of an externally loaded movie to a different frame rate than the movie it is embedded within.
I basically have a flash site that loads flash movies using loadMovie command, however, the frame is lost within these movies and simply adopts the main site frame rate.
View 2 Replies
Oct 26, 2010
I'm building a flash game wish contains sounds/images/videos and such. Now I want to build a preloader for this game. The problem is that currently it is around 2 mb of data in the first frame. How can I see wish objects that are being loaded in the first frame?
View 1 Replies
Feb 16, 2010
I have a textarea named "debug" on frame 2 that does not exist on frame 1Using this code:
Code:
function outputHello(){
debug.text="Hello";
[code].....
View 1 Replies
Sep 21, 2004
it possible to set the frame rate of an externally loaded movie to a different frame rate than the movie it is embedded within. I basically have a flash site that loads flash movies using loadMovie command, however, the frame is lost within these movies and simply adopts the main site frame rate.
View 2 Replies
Jun 8, 2009
I have a bunch of SWFS from a third party tool that I am loading into an MC called "_root.dropzone". I want to be able to tell flash to move to a frame label in my main movie when that loaded MC has played the last frame but I have no idea how to do this. I don't have the FLAs for the swfs otherwise i'd just add code into the last frame. Here's what I am using:
if (_root.dropzone._currentframe == 1521)) {
_root.gotoAndPlay("s_2");
}
This doesn't seem to be working as flash jumps to "s_2" immediately...
View 3 Replies
Sep 20, 2008
I load an external .swf file into a Loader. There is a button on the main timeline which is supposed to send the Loader's Child to frame 4.
View 3 Replies
Nov 9, 2010
After site is loaded a 100% it is stuck on the preloader image in frame one instead of going to frame to of my project.
I suppose further information about my project is needed so just say what to post and IŽll post it.
View 12 Replies
Feb 6, 2009
My movie goes to a home page, if the user clicks "contact" (for example) then the value of 5 is set to i and the movie preceeds to play a small transistion. At the end of this transition there is code that says if i == 5 gotoandplay(83).
The problem is I need it to see if that frame is loaded yet and if not, just stay on the current frame until it is.
Code:
if (i == 5)
{
while (framesLoaded <= 83) {
}
gotoAndPlay(83);
}
I assumed this would lock in a loop until it is loaded,However it obviously does not work
View 5 Replies
Sep 3, 2009
How can i go to a specified frame on a loaded external swf.
So communication from one swf to another.
View 5 Replies
May 16, 2005
I have a dropdown menu that I'm learning to use from a tutorial. It's just a little over my head and am wondering if someone could help me. Here's my situation:
1) The menu has the title, DESTINATIONS. Submenu dropdown are a list of CONTINENTS. Rolling over CONTINENTS show COUNTRIES. This works.
2) Clicking on a Country should:
A) load an external swf into an empty movie clip :: Works!
B) go to the COUNTRY specific frame within that loaded movie clip. :: Doesn't work!
Here is a sample code from this menu, where it defines the fields that populate the menu:
var menu_0 = ['Destinations',['Africa#destinations1.swf|Rwanda#destinations1.swf |Uganda#destinations1.swf|Kenya#destinations1.swf| Madagascar#destinations1.swf|Botswana#destinations 1.swf',
'Asia#destinations1.swf|Japan#destinations1.swf|In diat#destinations1.swf']]
how to direct the link in the menu in a specific frame in an externally loaded swf? I can do this on a 'normal' button using placeFrame, but because I'm unfamiliar with how this particular menu is made, I don't know how to implement what I know.
View 5 Replies
Jul 11, 2009
I've noticed that when I instantiate a MovieClip with multiple frames (here mine has over 200, each with a vector logo) and send to a specific frame, flash player suffers very little slowdown.
I always assumed the whole mc was being loaded into memory? It is possible that my mc simply isn't big enough to cause any problems. I just wondered if anyone knew the answer?
View 3 Replies
Oct 7, 2004
im importing a movie with Code:loadMovie("test.swf","content")were content is a little pink box with instance name contentnow my question is , how do i choose which frame the imported movie is on.i want to be abel to go to a certain fram in it and stoppreferably with no code in the imported movie if its possible
View 4 Replies
Oct 18, 2009
Here is my preloader code:
stop();
this.addEventListener(Event.ENTER_FRAME, loading);
function loading(e:Event):void{
var total:Number = this.stage.loaderInfo.bytesTotal;
var loaded:Number = this.stage.loaderInfo.bytesLoaded;
[Code] .....
Why the animation [logoANIM] isnt going to the specified "loadedFrame" frame #... Additionally the
trace(loaded frame);
isnt outputting the loadedFrame #
View 4 Replies
Apr 28, 2010
This code is not functioning! How do I amend this code to go to frame 5 when all the SWFs are loaded?
[Code]...
View 2 Replies
Feb 16, 2012
Im building application where users can upload flv's with the fileReference. When a user press upload the flv is uploaded into a folder and the path stored into the database.
When the user clicks on an other page, he can see a list with all the uploaded movies. But I want to create custom control for the movie so the user can click one to play.
How can I add a 'poster'from the first or a random frame from the FLV?
( There is no option to create a png for each file because when the app is online user can pick there own FLVs to upload. )
View 1 Replies
Sep 8, 2008
I'm having a problem, apparently not very hard to solve, but... I'm creating a file with some animations and a few stops on the timeline; on each stop I want to load a swf... The idea is to make the main timeline "wait" for the swf to stop when it arrives to the las frame and then, make it to unload and continue playing until the next stop...This is an application to work local (not on the web).So, I want the swf to unload without any click; just by itself.
View 9 Replies
Jan 27, 2009
I have Movie that has a preloader on the 1st Frame and then on the 2nd Frame a swf is loaded using this script.[code]This loads my test_1.swf into the test_1 mc inside the cc mc.This all works fine.... However what I want to know is how to only gotoAndPlay ("3") after the test_1.swf has been fully loaded?The idea I'm working with is that... an initial swf (simply an image with a preloader - test_1) would load into the background when the swf is started and then a menu would appear in frame 3 that would allow the user to replace the background swf with button clicks..... But at the moment the menu on frame 3 is loading before the background swf is loaded.
View 9 Replies
Feb 23, 2010
Is there a way to go to a specific frame with in a swf that has been loaded to a new blank? I been looking round and can only find going to a specific frame within the main swf..
View 3 Replies
Aug 8, 2002
is it possiable to target/query a specific frame in a movie that i am loading into an empty MC...?
eg:
on (release){
if (loadedMoviePath._currentframe == 10);
loadedMoviePath.MC1.play();
}
loadedMoviePath - what would the path to the MC in the movie that has been loaded be?
whatGoesHere.MC1
View 2 Replies
Oct 11, 2006
Is it possible to have my loaded swf file play at a different speed than my main movie? Any tutorials on this?
View 1 Replies
