I start flash as3 project on Flash CS3, about one year ago. After compile it on CS4, I get this error (on Russian):
[Code]...
But I get this error only in browser (FlashPlayer10), if I run inside Flash CS4 - all works fine. And I get this error then the MovieClip with TextArea added on stage.
I migrate from 3.0 to 3.4 SDK and see the following bug in my flex projectVerifyError: Error #1053: Illegal override of FlexModuleFactory in mx.core.FlexModuleFactory
View 2 RepliesOk, this is a somewhat complicated issue dealing with SWCs and compilers. I've outlined steps to reproduce the problem below. I'm using the method outlined here to bring in Flash content to my project. I have 15-20 SWCs already, and it's working fine for those assets, the problem is specifically related to Flash's components (ComboBox, RadioButton etc.) If anyone has *any* advice on this, please let me know as we are completely stumped at this point!
The issue we're having involves using multiple external SWC files which contain AS3 components from Flash CS4. When two SWCs are linked to an ActionScript project (using Flash Builder 4 Beta (build 4.0.0)) there are collisions in the referenced classes which cause the most recently published SWC to knock out any duplicate classes in the other SWCs. A simple way to replicate this is as follows:
[Code]...
I am planning on a Flex project that involves incorporation of a lot of features.
Each 'feature' can be a component / module.
Which is preferred and what is the difference between a module and a component?
I played around with the new tween tool in CS4, and it seems that the difference is I dont see the tween arrow anymore in the timeline; and there is an easing in the property that has been added. How this has changed from the old concept finally? I see this just like putting some icing on the cake, and nothing would wow me to use this tool.
View 1 RepliesI am stuck in as3 hit test problem. this is the code i wrote in as2. migrate this in to as3
[Code]....
I've got in over my head trying to learn programming, but love it.How would you teach a designer to migrate from design to object oriented programming?
My interest is AS3 in Flash IDE, but any advice is welcome. Looking for a full explanation.
I have an Actionscript project that was building using Flash cs3. Project have TextFields (Text engine: classic text, Text type: dynamic text). Since I upgraded to CS5 and published, I find out that my text not rendered. I use Font family Tahoma. And I just set Font family to Tahoma again and published. After that manipulations my text start render. But when somebody else try to open my project using same Flash CS5 IDE and just published that project again without any modification - none of my text is rendered again. And that going round in circles.
View 2 RepliesI am migrating from Flash MX to Flash CS 5. One of the most annoying things so far about the changes is that whenever I open a file - it opens a tab - How can I stop this? I was able to stop this in Photoshop CS but there does not seem to be that option in Flash CS
View 2 RepliesI am migrating from Flash MX to Flash CS5 Pro. Is there a way to load a movie into the flash player and play it to a viewer without installing the adobe server software and the price that goes with it? Is there a way to just have the movie file stored on the server and just get the flash player to call the file and buffer it?
View 5 RepliesIn Flash Professional CS4, I get "migration issue" warnings when I use mouse/keyboard input handler names such as onMouseDown, onKeyUp, etc., even though I have added event listeners for them. These names are perfectly legal for functions, but since these were automatically fired in ActionScript 2.0, we are now (albeit sensibly) warned that their use is no longer automatic in AS3.I understand the purpose of the warnings, but they aren't useful for me. I want to suppress these warnings, but without suppressing any other warnings, which I generally do find useful.I found a flex-info.xml style document in the Flash User Data dir.[userdatafolder]/Adobe/Flash CS4/en/Configuration/ActionScript 3.0/FlexInfo.xml.However, this file contains a disappointing comment: <!-- Flash does not support most flex-config options. -->, and doesn't seem to respond to my directives even after restarting flash. Found an issue "Erroneous, annoying "Migration issue" warnings" on Adobe bug tracker. A fix is confirmed for the Flex SDK, but no mention of Flash...
View 5 RepliesI am created a dynamically adding a VBox, that contains two images. Into a Custom Component that is derived from UIComponent. The problem is the Vbox that contains the two image is only a really tiny size. I would like the VBox stretch to the size of the two images. This is how I am creating the Vbox....
[Code]...
I am migrating a bunch of projects which were built in Flash Pro to Flash Builder....The basic structure of those projects were an FLA which has a DocumentClass. That DocumentClass referenced various items on the stage...
Is there any way to duplicate this in Flash Builder? I know I can just embed the swc or swf and then access items via ThatDisplayObject.itemToAccess, but calls from outside will no longer work. I.e. if this project is loaded by a container, which then calls SubProject.itemToAccess...Or must I change all the mappings, or set getters/settings on the new Flash Builder project so that outside calls will access the items?
I want to integrate my flash file with php code. I got the below code from
[Code]...
I did all the steps given in that forum but while running that code i got error Like 1180: Call to a possibly undefined method LoadVars. Warning: 1060: Migration issue: The method LoadVars is no longer supported. For more information, see the URLVariables class, the URLRequest.urlVariables and URLRequest.postData properties, and the URLLoader.dataFormat property.. 1136: Incorrect number of arguments. Expected 5.
I would like to add a widget board to my flash project so users can embed my project in their web page or wiget display. To see what I'm talking bout go here [URL] and click the white + mark on their widgets.If your a moderater please put this in the correct area, and consider making it a sticky so we can post new ways to impliment in different sites as they become available.
View 2 RepliesI just wanted to ask if I have a project created in authorware and one more in director.I just wanted to ask can we convert authorware project in flash directly or indirectly?Or can we import authorware project and/or director project in flash.does anybody know or anybody has done this b4???
View 1 RepliesI am developing a project in Flash Builder which will load a file built by Flash CS4. The code in Flash CS4 is below, it's a doc class. I am sure the dispatchEvent has been invoked[code]...
View 1 RepliesI have a CodeIgniter project and I made a back-office in Flex. I was wondering how I can implement the Flex project in my CodeIgniter since I'm working with routing I can't route to any directory. So there isn't a way to display the back-office.
View 1 RepliesI cant "center" my project, like you can see its "fixed" (yellow lines) in the left side and I cant see "invisible" part of project... (area around the project). how can I move my project so I can see the not-project area around the project. (picture 2).
At the moment situation... (cant see that area around the project)
http://img19.imageshack.us/img19/1186/68553623.png
I'm having some big problems trying to migrate this part of code from AS2 to AS3. I'm newbie, and tried to google examples, but i still can't get it.
[Code]...
I found this code in an AS2 .fla and would like to use it in AS3. (The idea is to throw a random number of copies of the movieclip "star_mc" on the stage via AS).
for (var i =0;i<50;i++) {
star_mc.duplicateMovieClip("star"+i,i,{_x:Math.random()*350,_y:Math.ra ndom()*150});
this["star"+i].gotoAndPlay(Math.random());
}
I get this error message: TypeError: Error #1006: duplicateMovieClip is not a function.
at many_fla::MainTimeline/frame1()
I have just upgraded from Flash MX (Macromedia vanilla version of flash) to Flash Creative Suite 5 migrating from ActionScript 2 to to ActionScript 3?It has been a while since I have used flash ActionScript on a "medium plus" level As I am currently *attempting* to convert an awesome preloader that I used to use in my old flash projects.
View 3 RepliesI have set up a Flash Project to publish two FLAs simultaneously.However, when I click on "Test Project" I get the following error message:Quote:Cannot open a protected movie.However, when I publish each of these FLAs independently, I do not get the error message and the file publishes and runs with no problem.
View 0 RepliesI finally completed a flash 8(AS 2.0) that uses the netdrims component/Netdrims php file, toload one mySQL database, use it, and then save new to 4different tables in that database.3. This was proven to work on my local, offline PC usingmySQL 5.x, Apache, php 5.x, and myPHPAdmin.4. As this is my first time, I want to upload the mySQLdatabase, html, and swf files to my server.(i.e. migration of completed flash,php,SQL project fromlocalhost to server)5.The host of my Linux server runs appropriate versions ofApache, mySQL, php.6. What considerations are important?Do I need to change the component path from localhost tosomething else? How do I set up the root password to the mySQL database onhe server, etc.
View 5 RepliesI'm trying to figure out the AS3 equivalent of this AS2 code. In this example there would be 10 movie clips on the stage with instances of "mp0", "mp1" etc... The actual project has hundreds of movie clips.
PHP Code:
for (i=0;i<10;i++){
var sectorColor:Color = new Color(_root["mp"+i]);
[code]....
I was converting an FLA to ActionScript 3 when I encountered a problem with gotoAndPlay not finding certain frame labels that were clearly there. I set up a loop to trace all frame label names and the scenes they were found in, and discovered that while the labels were all present, they were in different scenes than before. Some groups of labels that had been together in a scene were even split up across multiple scenes.
Is this a common glitch? I tried deleting one label and putting it in again, and it was still in the wrong place.
[Edit]: I added the frame numbers to my trace test and two of the labels share the same frame, and several have ridiculously high frame numbers.
Do you know any flex component with the functionality such as horizontally collapsible window or panel I found arc90, but it folds vertically.
View 1 RepliesI'm having a problem adding a library clip to my stage I can do no problem if I have a testFLV.fla that has a library clip called test_clip with the linkage set to: com.attach_clips.Clip.
import com.app.views.mediaDisplay;import com.attach_clips.Clip;
public class FLVTest extends Sprite { private var _mediaDisplay:mediaDisplay; public function FLVTest() { this._mediaDisplay = new mediaDisplay(null); var clip_1_mc:Clip=new Clip(); var clip_1_mc:Clip=new Clip(); this.addChild(clip_1_mc); clip_1_mc.x=100; }}
If I use the same concept in my mediaDisplay class, the clip isn't added to the stage. Obviously it's got to be a scope issue since 'this' in the first examplerepresents the .fla itself but in mediaDisplay this doesn't have a stage object.
package com.app.views {
import flash.display.Sprite; import com.attach_clips.Clip; public class mediaDisplay extends Sprite { public function mediaDisplay(attachControls:Sprite) { var clip_1_mc:Clip=new Clip(); this.addChild(clip_1_mc); clip_1_mc.x=100; }; }}
how I could 'attach' test_clip to the stage from mediaDisplay?
I am trying to migrate as2 to as3 code.The normal solution to my problem involves using the first parameter of the createEmptyMovieClip() as the name of your movie clip. In several instances I have a dynamic value for this first parameter- so my question is How should I go about doing this?
//my code
function someFunction (){
loader_mc = this.createEmptyMovieClip("text"+value, value);[code]......
Is it bad practice/design to nest components inside components using Flex 4? Should I simply be creating components and inserting them into my main application as below, or doesn't it matter?
<com:MyComp1>
<com:MyComp2>
<com:MyComp3>
[code]....