i am trying to fit gallery to my needs and actually i stop on problem with fading in and fading out. What i wanna do is fade in new picure on last visible picture - so last picture is still visble in backgroun when new one is fading in on same place and so on.
here is code that load the images (i also attached fla file cs3):
Code: Select allp = 0;
this.onEnterFrame = function() {
filesize = picture.getBytesTotal();
[Code].....
I'm trying to find out how to make a simple image gallery which changes image upon a mouse click on a button, when a button is pressed I want the image to slide in from the left into the viewable area and then when another image is selected I want the previous image that was viewed to remain in the screen and then the new image slide across over the top to replace the image.
I can get the images to slide across from the left upon a mouse click however I can't change the layer order so if image 6 is viewed and then I click to see image 1, the image will slide into place however it will be below image 6 so therefore not viewable.
I don't have an example of what I'm after but I hope my explanation was good enough, I've seen this been done in javascript but I have to use flash and am unable to replicate the effect I'm after
I am aiming to create a looping array of images so that each fades in and fades out again ... here is the code i have so far ... it works EXCEPT ... it stops at the end of the array and appears to jump or hop a little between images ... want it to be smoother.
Code:
var aImages:Array = new Array("flashcontent.png", "flashcontent2.png", "flashcontent3.png");[/quote][quote]
var imageFolder = "../images/";
var fadeRate:Number = 1;[code]....
I'm using the following code to load external swfs over each other.
At the moment the time between each image is the same - 10 seconds. I'm trying to work out how to change the time so the first image loads, waits for 5 seconds, loads the second which waits 10 seconds before loading the third swf.[code]...
I used the fade class to build a fade in-out image gallery. It s quite easy and it works fine. But then they asked me to load the images randomly and thats when the thing got complicated.[code]...
View 0 RepliesI have a 3D image gallery I am working on and would like it to fade and scale onto the stage (whilst still spinning)Make image gallery fade and scale in?Here is the link to my test page.
I have also attached the current actionscript code in a zip file.[url]...
Not loading the images for a little info bar at the bottom. It works if you view a folder, however it doesn't work when you just view the main images. I am tracing it, and it traces great, just doesn't want to work.
View 1 Repliesi want to make another mod to kirupa's xml gallery.i also noticed that on a mac when it is on the server, the image doesn't fade in unless it has already been viewed.i'm trying to make the images slide in from the right when the next button is clicked.it would be awesome if the previous one moved out of the way to the left as the next one slid in but i have no idea how to achieve that.
function loadXML(loaded) {
if (loaded) {
xmlNode = this.firstChild;[code]....
I'm doing my daily homework at Flashkit, in order to see how other people do certain thint was just the other day when I downloaded the "Fade script image gallery" by Ben Durman, when I stepped into an unsusual? behaviour that I can't get to understand.It's very simple, in the gallery there are 10 pictures. Everytime you click in one number, the previous image fades out and the new image fades in. The AS code is very simple and easy to understand. However, why I can't possibly understand is that when I create a new layer with another image, the whole movie starts to statter, transitions are not smooth any longer and some transitions are not even properly executed. The more layers/pictures I add, the worse it all gets (15 pics is almost impossible to handle)Part of the original code which makes transition between pictures happen is this:
[AS]
onClipEvent (enterFrame) {
// find alpha of new pic
[code].....
I need a simple image gallery to load when you click a button. I've tried shadowbox but have had absolutely zero luck. I'm not sure how to load it from a flash file and I know there is work that has to be done outside of flash like in the root folder. All I need is for a simple image gallery, nothing fancy, to open when I hit a button. how to use shadowbox in lamens terms or knows how to easily script a gallery that would be amazing.
View 2 RepliesI need a simple image gallery to load when you click a button. I've tried shadowbox but have had absolutely zero luck. All I need is for a simple image gallery, nothing fancy, to open when I hit a button.
View 9 RepliesI'm trying to make a simple horizontal image gallery scroller. Not sure what I'm doing wrong here. I've gotten the slider tab to work properly, but the masked image gallery is not moving at all when the slider is pulled. I included the Flash 8 FLA for the scroller in the post below.
View 1 Repliesmaking my image gallery, but it only works as each image in the array is clicked. Now I am trying to make the gallery move automatically to the next image in the array every 5 seconds while still giving the user the ability to click on an image to view the one that they want.Here is my code so far (like i said it works great, but only as a click-able gallery):
import flash.display.Loader;
import flash.net.URLRequest;
import flash.events.Event;
import flash.display.Sprite;
[code].....
I have flash CS4 and some time ago made a simple movieclip in an older version of flash.I now want to make a simple gallery with thumbnails that show a larger image once you hover over the thumbnail.[URL]I forgot most of the workings in flash, so it's difficult to make what I want.
View 2 RepliesLooking for a tutorial on how to do a simple Fade In and Fade Out gallery, there doesn't need to be any buttons, just images that fade in and out one after the other, anyone know of any tutorials on this?
View 1 RepliesI have 5 buttons that need to, when clicked fade the image in the background out and fade a new picture in. each of these buttons has a specific image related to it. how can i achive this smooth transition in and out for all of the buttons?
View 1 RepliesI have a tweened movie which plays on a loop. A click on the image area stops the movie and the image fades nicely from alpha 100 to alpha 0. A second click brings the image back immediately to alpha 100 and the clip continues. I would like the movie image to fade back in from alpha0 to alpha 100 before it re-starts; (the reverse of the fade out). At the moment the re-appearence of the image is a crude jump. So far my ill informed tinkering has not worked.
[Code]...
I would like to create a flash movie that loops through 11 dynamic images continually with a fade-in, fade-out each image.
View 2 Replies What I'm trying to do is have an image fade in, pause for 6 seconds and then fade out.My 6 seconds is doing something, but it's not what I want it to do and I'm not sure why. Here's my code:
import fl.transitions.Tween;import fl.transitions.easing.*;import fl.transitions.TweenEvent;var myTween:Tween;[code]...
function that I can re-use and pass movie clips to and cause mc's to fade in and out?...such as
Code:
function fadeMeIn(fadewhat,fadespeed) {
if (fadewhat < 100) {
[code]......
I am trying to have a simple swf with a static background image that will have phrases at random locatoin slowly fade in, stay for a few seconds,and then fade out. Then the next phrase, and the next one,and then next one,until it loops arround again. The phrases are coming from a database,and I have already created my asp code to give me a page with &phrase=phrase1,phrase2,phrase3,...&status=1&. My fla file has two layers--one for the background and the other for a movie clip wich contains a dynamic text field. My first frame loads my variables, and my second frame looks to see if status equals 1 (the last variable being loaded). If status is not equal 1, I send the head back to frame 1, otherwise I split the phrases into an array, get the height and width of the swf, and init a count var to 0.
Code:
//Look for a way to test the number of times the loop back to frame 1
//has been doen so that we can set a time out. Additionally, maybe put
//logic in the system to test for a blank services?
if (_root.status == 1) {
[code]....
However, many parts of that code does not work. I broke the math stuff up so that I could see the values in debug. Anyhow, Text_Width and Text_Height are undefined, which causes Text_X and Text_Y to be calculated for positions that may put the text off screen?
I've been trying to get a simple fade out of a logo to work. I converted the logo to a movieclip called logo_mc I click on the logo_mc movieclip and insert this actionscript.
onClipEvent (load) {
if (this._alpha>0) {
this._alpha -= 5;
}
}
I have also tried putting the code on the main timeline without any success.
If I understand correctly this should see if the alpha is greater than 0 and if it is it should decrease the value by five increments until it reaches 0.
I'm new to the forums and to actionscript. I've been trying to get a simple fade out of a logo to work. I converted the logo to a movieclip called logo_mc I click on the logo_mc movieclip and insert this actionscript.
[Code]...
I have also tried putting the code on the main timeline without any success. If I understand correctly this should see if the alpha is greater than 0 and if it is it should decrease the value by five increments until it reaches 0.
In order to fade-in 3 Movieclips that I have in 1 frame, I'm using this AS code for each MC:
[AS]
setProperty (MC1, _alpha, 0);
setProperty (MC2, _alpha, 0);
setProperty (MC3, _alpha, 0);
[code]....
It all works fine, the fade-in effect is accomplished but I've found out that Flash keeps on checking over and over if the condition is made (although it has already reached the 100 alpha value). The result is that the Flash movie eats almost any computer's resources up to 100% because it keeps on checking these 3 values endlessly.Is there a way to tell Flash to stop checking these values once the condition is reached (true)? Or is there another way to get the same result with a similar AS code?
I'm learning how to tween instances using AS and not the timeline but I've run into a rather odd little problem regarding Alpha fades. It seems that the instance I'm fading in only remains on screen for a while (a minute or two) and then promptly disappears. Similarly in a simple slideshow I've made (where the images just fade in over the top of one another) the second rotation runs without a fade in/out.
Here's the code I'm using attached to the instance:-
On clipEvent (enterFrame);
instance = +10
I have a simple text fade movie clip that will "play" but won't work when I "Test Movie." What am I missing? I don't regularly use Flash as of yet, and have been successful before, but this is ridiculous - and I know I'm probably missing something very simple.
View 3 RepliesI'm trying to get a prototype working for a website.
What I would like to do is have five buttons at the bottom of my stage, and when I click them, an image fades AND eases in. I have this part finished so far, but the issue is that when I click another button, I want the previous image to fade/ease out before the next one fades/eases in.
Here is my code:
Code: Select all
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;
[Code].....
simple way to fade images out/in on a basic gallery.I am tearing my hair out trying to find a simple transition method.
View 2 Repliesi was looking for gallery looking like this site [URL] i was looking gallery first page title gallery then Big image like this with description.
View 1 Repliesi am trying to add extra images to the photo gallery attached. I would have thought it is easy and it seems so. I add an extra image to the gallery. I publish it. The html file shows the extra image in the gallery but the swf doesnt. driving me crazy, cant work it out?
View 14 Replies