I have a ManagerClass with a Singleton implementation inside, I get the instance by calling ManagerClass.getInstance().
Can I get that same instance by just having the class name as a string? I have tried something like:
var theInstance:* = getDefinitionByName("ManagerClass").getInstance as Class;
theInstance.doTrace(); // I get a 1009 error here
How can I access a timeline variable from a static class / singleton?
View 14 RepliesI am not able to understand, why a static class cannot replace a Singleton design pattern .
Cannot a static class, can be used to ensure, the class is never/once only, instantiated. Because that is the facility "static" key words provide , however it doesnot allow instantiation, but that is much similar to the limitation of instantiation once only.
If all I have is an instance of an object, can I call a static method of its class? For fun, let's say I don't know what the name of the class is, only the name of the static method.
View 3 RepliesI WIh know how Can I use a singleton class to make only a one instance of a movieclip on the stage.I use this code to make my movieclip instance:
Code:
var mioOggetto:wwp = new wwp();
mioOggetto.y = stage.stageWidth /2 -200;[code].....
I have a class ErrorMessages which holds all my error messages as static constants. So I could access them like ErrorMessages.PASSWORD_INVALID or ErrorMessage.PASSWORD_TOO_SHORT. I want to know if it is possible to have separate classes that hold subset of these constants and access them like ErrorMessages.PASSWORD.INVALID or ErrorMessages.PASSWORD.TOO_SHORT, etc. This way I can more structured static structure and makes it much easier to use autocomplete. I tried few different ways and couldn't figure out if this was possible..
View 3 RepliesI'm kind off oblivious as to what I'm doing wrong here... I have two classes: - Alley - AlleyCat
[Code]...
I have a doubt,.... How would you create a Singleton class in Flex...
Is there any convention like the class name should eb Singleton or it should extend any other class.
How many Singleton class can a project have?
Can anyone say the real time usage of a Singleton class?
I am planning to keep my components label texts in a Singleton class... Is it a good approach.
I know singleton class is not supporting in Flex.Because it does not access private constructor. But i want to make a class is singleton class.
View 2 RepliesI know actionscript does not allowed private contstructor at any time and But if i want to write a sinlgleton class in action script So how to implement it in actionscript.
Can anyone provide an sample example of a singleton pattern in actionscript?
I know actionscript does not allowed private contstructor at any time and But if i want to write a sinlgleton class in action script So how to implement it in actionscript.
Can anyone provide an sample example of a singleton pattern in actionscript?
I found a lot of tutorials that show how to use getDefinitionByName() to create an instance of a class. Something like the following:
Code:
var classRef:Class = getDefinitionByName("menus.buttons.Icons") as Class;
var iconClassInstance:Icons = new classRef() as Icons;
[code]....
My method has been passed a class instance, but it was typed through an interface so I'm not 100% sure what class it is. I'd like to attempt call a static method on that instance's Class.. is there an easy way to do this without being forced to pass the class along as well?
Something like this:
ActionScript Code:
public function foo(myBarInstance:IBar):void {
var barClassPointer:Class = getClass(myBarInstance);
try {
[Code].....
What I'm looking for is a way to reference the document class instance, to be able to access functions and variables that other classes need. I'm currently doing it with this little piece of code I found on some blog or forum.
Code: Select all// This is in the document class
private static var _instance:DocClass; // I have tried setting this to public and accessing it directly as well
public static function get instance():DocClass { return _instance; }
[code]....
This seems to work as it should in Flash CS4, but when I try to run the same code in CS5 I get the following error message:
Code: Select allC:UsersImpenDocumentsMy DropboxFlash Project\_SPELTankGameMenuShop.as, Line 238 1195: Attempted access of inaccessible method globalFunction through a reference with static type DocClass.
I need to know when an element is added to the stage (using main document class). So i use :
Code:
public override function addChild(__child:DisplayObject):DisplayObject{
super.addChild(__child);
trace("child added");
return __child;
}
Which works fine. I also use a static class, to which i pass the stage using :
Code:
public static function setStage(__stage:Stage):void{
_stage = __stage;
}
But if i add to the stage (_stage) a MovieClip from the static class, my "real" stage doesn't seem to get that something was added. So i guess _stage !== stage.
So why is this happening, why is _stage not getting the methods of stage ?
pros and cons of either using a Singleton that enforces only one instantiation of itself, versus creating one common class with static vars which can be accessed by all other classes that import it?
In my testing, importing but never instantiating works fine. I can even change the value of one of the variables and then have another class see that changed value later on in the program.
If I *know* I will never actually create an instance of my Global class using the New command (but will instead just reference the variables using the class's name), then why should I need to make it a strict Singleton?
I have a base class which is being created via remote_object [RemoteClass alias] from the server.I have other specialized classes that are derived from this baseclass, but serialization with the server always happens with the base class.The base class has meta data that defines what the derived class is, for example
[RemoteClass (alias="com.myco...')]
public Class Base
{
[code]....
My first swf loads a singleton class and instantiate it , and I access to it in the following swf's files (they were loaded in local system).
Now I have to load all swf via http. The issue is when I load second movie throw the first one, I can't get the singleton instance... it seems it lost reference...
I have a singleton class that looks something roughly like this (only with more bindable public properties):
public class Session extends EventDispatcher
{
private var _Id:String;
private static const _instance:Session = new Session( SingletonLock );
private static const SESSID_CHANGED:String = 'SessionIdChanged';
[Code]...
The abnormal behavior I'm discovering is that the event listeners registered through registerOnSessionChange are indeed being called when the session Id changes, but the MXML data binding expression is not updating. I've tried all combinations of dispatching the event during the capture phase, and making it not cancelable, but to no avail. My understanding of [Bindable (event= ...)] is that the MXML should update the url string when the event specified is dispatched, so what am I doing wrong or misunderstanding?
Note: I realize there are lots of different ways of doing the singleton pattern in Actionscript, but unless the way I am doing it is actually causing my problem somehow,
I have a Main class loading 2 SWF (loader and viewer, also with document classes). They need to share a double buffer with content, of course, filled by loader and showed by viewer I was thinking to use the LocalConnection class but after a suggestion from PatrickS now I'm evaluating the possibility of a Singleton Class. I've never used this pattern in AS and must confess I'm rather biased against it.
But in this particular case I guess it'll be useful. By the way, a little bit surprised reading in the gskinner blog 2 implementations examples. So, knowing this subject is an endless war like the Mac vs PC one Take into account:
1. AIR desktop application running 24x7 during some months in a high-end Windows PC. No user interaction
2. High performance code is a must because content loaded are full HD images My other concern is about memory leaks
Say you have a flexunit test that looks like this:
package foo {
import flexunit.framework.TestCase;
import flash.utils.getDefinitionByName;
[code].....
I have main application which contains ModuleManager. Different modules are loaded by this application. Both main application and loaded modules use my custom RSL. I need to get Class object in my RSL, which is defined in one of the modules. I'm trying to use getDefinitionByName function, but since my class is not defined in RSL, I get an exception (though module with needed class is loaded). Is it possible to make module classes visible to RSL code and to get the instance of it at runtime without changing project structure?
View 2 RepliesIn the Singleton design pattern you can throw a runtime error if the instance has already been created. But this doesn't work when your singleton class extends another class and has to call super() in its constructor, because (for some reason) you cannot call super() if you've already called throw(), or in fact, you cannot compile code that has a potential call to throw() (for example, in an IF statement) that comes BEFORE that call to super().
View 4 RepliesI'm trying to load swf from 127.0.0.1 into my main.swf with Flash Pro
Both swfs have Singlenton class
How to make it that loaded swf use Singlenton of main.swf ?
I did
ActionScript Code:
var lc:LoaderContext = new LoaderContext();
lc.applicationDomain = ApplicationDomain.currentDomain;
myLoader.load( new URLRequest("http/127.0.0.1/loaded.swf"),lc);
anyway I have 2 different Singlenton classes one comes with loaded.swf another in main.swf and variables not shared
is any way I can merge this values?
I have this class
package somePackage
{
public class SomeClass
[Code]...
I want to be able to get those static property given it's name.
Example:
public static function getProperty(propertyName: String): SomeClass {
//don't know what goes here
}
[Code].....
I have two SWFs: main.swf and external.swf. main.swf needs to access some methods in external.swf, so it loads external.swf into itself and uses getDefinitionByName("package.Class") to access the class and one of its methods:
var ExternalClass = getDefinitionByName("package.Class") as Class;
var ClassInstance = new ExternalClass();
var NeededFunction:Function = ClassInstance["NeededFunction"] as Function;
var response:String = NeededFunction(param);
Now, I need to extend the functionality of NeededFunction (which is a public method)... I know it's possible to override public methods, but how would I go about this with a dynamically loaded class?
I was thinking I could do something like this, but it doesn't work:
var ClassInstance["NeededFunction"] = function(param1:uint):String {
var newString = "Your number is: "+param1.toString(); //New functionality
return newString;
}
this is a working singleton class for Tooltips. I want to add a timer in order to delay the tooltips since the way they're instantly popping up is bothering me.
This is the fla:
Code:
//Import and Initialise the ToolTip class
import ToolTip;
ToolTip.show();
[Code]....
Given that both of these calls to getQualifiedClassName return the same thing (mx:Label), how would one go about programatically differentiating between an instance of a class and a reference to the class...
var lab1:Label=new Label();
var lab2:Class=Label;
var qcn1:String=getQualifiedClassName(lab1);
var qcn2:String=getQualifiedClassName(lab2);
In other words, how could I know that lab1 is of type Label, while lab2 is type "Class". typeof() simply returns "object" for both... getQualifiedClassName returns "mx.controls::Label" for both...
I have created a Singleton class that handles my project texts. What is the appropriate name of a Singleton class like this?
[Code]...
Alright, so I have a class that is linked (via the linkage panel) to a scrollbox class. I'll paste the class here:[code]Ignoring the formatting, the commented out functions are the ones causing the issue. Adobe says that it's a static class and I can't use non-static functions. The way I wanted to use it was:
1. Call the page button generating function above.
2. In the main code in my program is this line:scrollbox.setClickFunction(historyContent.generate Page);So when the buttons that are supposed to be generated are clicked, the scrollbox class can call the History pages generatePage function and pass it which page to show. (I did this because there was a lot of text and a limit on how much would display, so small chunks sounded logical).
3. In the onClick function (which I haven't finished yet because the rest wont work), when you click one of the buttons it calls the set function. Its that simple.