I have custom validator apllied to many comboboxes in different tabs of application. Its is performing the same validation for all the comboboxes. The only difference is for ecah combobox the custom validator should return a different error messagae. How can error message be specified...?...like some error property in mxml or by somehow passing the error message as parameters to custom validator class.
View 1 Replies
I have custom validator apllied to many comboboxes in different tabs of application. Its is performing the same validation for all the comboboxes. The only difference is for ecah combobox the custom validator should return a different error messagae. How can error message be specified.?like some error property in mxml or by somehow passing the error message as parameters to custom validator class, as I dont want to have one custom validator for each component.
View 2 Replieswhy the error message repeats in Flex SDK 3.5 (but not in 3.4) and have a good way to make it stop repeating?
[url]...
To make this happen, leave the textInput field empty and hit save multiple times. Then mouseover the textInput.
I have a need to validate a field against our database to verify unique-ness. The problem I seem to be having is that the validators doValidation() exits before we've heard back from database.
How can I have the validator wait to return its payload until after we've heard from the DB?
Or perhaps a better question might be (since I think the first question is impossible), how can I set this up differently, so that I don't need to wait, or so that the wait doesn't cause the validation to automaticallly return valid?
Basically I am trying to create a string Validator which requests a new language from its controller by dispatching an event upon its creation.
The example below is a straight copy from the Flex3 component explorer - the only diffrence being that I have created the validator as a custom component which dispatches an event upon its creation.
The problem is that my main Application cannot hear the event being dispatched and I don't know why.
Here is the example
MyValidator.as
package components
{
import flash.events.Event;
[Code]...
I have a custom TextInput-based component for date and time with certain restrictions on what's considered "within range". But it's still fine to insert dates that are outside the range. When a user types in a date, on valueCommit, I'd like to be able to display a hovering notification to the user, to inform/warn them that the date is outside the accepted range.
I'm thinking of notifications ala the Validators, but I'd rather not use the Validator mechanism because it's really not validation, just notification. Something like a tooltip, but it will only appear if the user changed the value. Maybe an effect of some sort?
I have a data grid where users can drag columns and reposition them. But there is a strange requirement that some columns should not be draged to the left of some other column. eg, assume the columns are: name, price , start date, end date, The end date should not be dragged and placed before the start date. i.e. The user can have start date, price , name , end date. name, start date, price , end date. But at no point can end date appear before start date. Is there a way to do this flex? Is there a way to know where the user is trying to drop the column and show error message ?
View 2 RepliesI use fileReference.download() to download files. The fileReference send request to java servlet.In servlet, some error may be checked. For example error - 'File not found'. I want to send the error to flex side. I tried lots of methods,but fileReference in flex can't receive them.Such asresponse.sendError(HttpServletResponse.SC_NOT_FOUND, "File not found");r PrintWriter out = resp.getWriter(); out.print("File not found");It seems fileReference can't triggers event 'DataEvent.UPLOAD_COMPLETE_DATA' and'HTTPStatusEvent.HTTP_STATUS'.
View 1 RepliesI am using AIR with tomcat..(blaze ds as bridge) but i changed in service.config also in server side but i got the following error.. how to rectify this problem Result : [RPC Fault faultString="Send failed" faultCode="Client.Error.MessageSend" faultDetail="Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Status 404: url:
View 1 RepliesWhen I connect data services using blazeds I get following error message.
[Code]...
Why am not able to connect? But when specify remoteObject in the declaration tags and call the methods it works fine.
I have a Validator on a RadioButtonGroup of 2 Radios. There's a checkbox above the RadioButtonGroup whereby if checkbox.Selected, then the Radios are enabled. So the Validator is required if the checkbox.Selected. So far so good. The problem is once a radio gets selected, the RadioButtonGroup selectedValue gets set. When I uncheck the checkbox I set the radios to not selected, but the selectedValue on the RadioButtonGroup doesn't get reset -- it hold the previous value. I tried setting it to null but no luck.
Therefore if I check the checkbox again and submit, the Validator see a selectedValue on the RadioButtonGroup. Even though none of the radios are selected, validation passes. How can I reset the RadioButtonGroup to its initial state when I uncheck the CheckBox? I looked at the underlying code for RadioButtonGroup.selectedValue = null, and what it does is look for a radio in the with the parameter value. If it doesn't find it nothing gets set.
I have followed this tutorial to implement an IP Validator over a TextInput. But, I have not been able to resolve following error for some hours.
Error: Could not resolve <flexScript:IPAddressValidator> to a component implementation. MasterTabNavigator.mxml /XflowGUI/src/view
Code:
MasterTabNavigator.mxml:
<mx:TabNavigator xmlns:fx="[URL]"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
xmlns:flexScript="flexScript.*" >
[Code] .....
I have referred this for creating error message tool tips, to be displayed continuously unless the error is resolved by the user. :: [URL]
But, this is being applied to a pop-up window visualized as a pop-up form.
When the user clicks 'CANCEL' button, I want the error message tooltips if present to be cleared off from the screen. The message tool tips remains on the screen even if the CANCEL button is clicked.
I'm working on a flex 3 application which will initially support only one language (which is not English) but may need to support English and other languages later. So I'm using the standard localization technique, with resource bundles. Now, somewhere I use the validators like EmailValidator which have some error messages displayed, these are in english and come with the flex sdk. How do I localize those messages?
View 1 RepliesI am working on a product options form whose contents should be cleared by a clearOptions() method each time the user adds an option. The option name TextInput is bound to a value object that is reinstantiated each time the the user adds a product option. The problem I am having is that the StringValidator fires each time the bound value object is reinstantiated.
[Code]...
I have seen several examples in Flex for passowrd validator using RegExp. But every where the validation is happend for single validation.
I have a requirement, like password validations like
- At least one Upper case letter
- At least one numeric character
- At least one special character such as @, #, $, etc.
- At least one Lower case letter
- password lenght minimum 6 digits
- password cannot be same as user name
I have the code only for checking the password is valid or not . check the below code.
MXML CODE
<mx:FormItem label="Username:" x="83" y="96" width="66">
</mx:FormItem>
<mx:FormItem label="Password:" x="88" y="123" width="61">
[Code]....
I'm working with flex 3.5 and I have a problem with a validator. I have a field that dynamically has o has not an asigned validator, the problem is that in a specific moment the field haven't the validator assigned but the textInput had a red border.I dont know what do I have to remove the red marker?Here is an example of my validator: This is the validator:
<mx:CreditCardValidator id="ccV"
cardTypeSource="{cardTypeCbx.selectedItem}"
cardTypeProperty="data"[code].........
And I have a button that been enable or disable because it has a binding with a boolean var isFormValid.The most weird thing is that when remove the validator the button becomes enables but the red border is still in the textInput.
I created a custom validator as follows in Flex 4 beta 2[code]...
it works but if you notice I have an Alert window for testing and it gets displayed 4 times which means the validator is getting called 4 times.
I have a bug to fix in work where the UK Pound symbol, £, is allowed in the domain name. I checked the EmailValidator source and can see that it is not a disallowed symbol, whereas things like the dollar sign are:
public class EmailValidator extends Validator
{
include "../core/Version.as";
[code].....
As you can see DISALLOWED_DOMAIN_CHARS string does not include the £ sign. Was thinking of monkey patching (basically copying the entire class, editing it, and adding it to my src - for those not in the know), but we use RSL's, so that would be problematic.
I am trying to and I have the following message error:"the video player is in the connection error state. It enters this state when a video stream attempted to load but was unsuccessful. There are two possible reasons for the error: no connection to the server or the stream was not found."
View 1 RepliesI've created some error handling for external images loaded via a path in XML. Within the Flash preview it's fine and shows the full error message (and most importantly, the URL that isn't loading).
But in the browser, even locally, it doesn't out put this message!
Here's my code:
function loadIOError(event:IOErrorEvent){
errorLog+=event.text+'
';
}
[Code]....
#1006: value is not a function. at MethodInfo-43() I don't know what the problem is, or where could it be, here is the problem code, but first a brief description: Every 3 seconds 3 enemies will be created with a random position, the enemies can't be appearing on top of the other so I check if they collide with any previously added enemies, if they do I assign other random coordinates and check again until there is no collision (I'm using the collision detection kit CDK for the collisions[URL]..the first 3 enemies appear correctly but afterwards the error appears and the next time the program enters the generation part the enemies begin appearing in ridiculous numbers.
[Code]...
i am new to flash (yet i have been using it for years) by that i mean, i struggle with it a lot. i was hoping someone could help me with the "incompatible override" error message and the "duplicate function definition" message.
[Code]...
i am currently trying to learn ZendAMF, but i have a hard time troubleshooting which makes learning it quite hard. Is there a way to make the PHP file throw an exception that gets traced as an error message in AS3 (not Flex), the only error i seem to be able to get is "Error #2044: Unhandled NetStatusEvent:. level=error, code=NetConnection.Call.Failed", but it tells me jack ****.
i have gotten ZendAMF working, i just want to know how i can make error handling better, so that as an example can use PHP to tell flash that no results were found, or that the typed text was invalid. Is it better to use AS3 to check if the field was filled properly?
I am reading attempting to load XML from a ByteArray as follows:
[Code]...
When I do that, I receive the following runtime error on the XML constructor when I run in Flash Player 9: TypeError: Error #1088: The markup in the document following the root element must be well-formed. This error message doesn't occur in Flash Player 10. I can use the debugger to verify that the XML looks well-formed. The XML is in UTF-8.
I want to create custom error and notify messages, but i don't know which element should I use. In the message there should be icon and text I tried to use Label but don't know how to build custom label the one I need. Is there a resource on how to create a custom label or tip how to do it?
View 1 RepliesBecause I want to avoid repetive code, and I'm using a lot of text formats, I created a CustomTextFormat class in Flex Builder.
Another class, called CustomInputBox.as is using this object to create a format:
package
{
import flash.display.Sprite;
[Code].....
I have created a custom multiline item renderer for mx:Tree component. Important to mention that my item renderer has two UITextFields in it. Sometimes (depends of the input data) only one of UITextFields must be shown, so when second UITextField is not needed I hide it and recalculate the height of my item renderer. According to my tests height is calculated properly.The problem occures when I do scroll of my tree. The error text is:
TypeError: Error #1010: A term is undefined and has no properties.
at mx.controls::List/adjustVerticalScrollPositionDownward()[E:dev4.0.0frameworksprojectsframeworksrcmxcontrolsList.as:1042]
[code].....
I'm trying to learn how to use custom events in Flex. I'm following Oliver Merk's tutorial found here: blog
The custom event works if I implement it using MXML in the main app. But, if I use actionscript, then I get error 1119: Access of possibly undefined property ADD_PRODUCT through a reference with static type Class.
My Event:In the events subdirectory, I've got:
[Code]...
This is NOT duplicate of my earlier post (its is slightly different)But this is similar issue with similar error but its not the same error The error I am getting now is below while dispatching the custom event from my custom component
TypeError: Error #1034: Type Coercion failed: cannot convert events::MapEvent@a74ab51 to flash.events.MouseEvent.
dispatchEvent(new MapEvent(MapEvent.CLICKED_ON_MAP));
Note: The error in my earlier post is giving below error message
Type Coercion failed: cannot convert flash.events::Event@81ecb79 to com.events.ShopEvent
The difference here are two things, the earlier error is while converting flash event to custom event and now this one is while converting custom event to flash event and secondly, I have no clue why it is trying to convert to the mouseevent where I am just dispatching my custom event with proper listeners.
This is my custome event
package events
{
import flash.events.Event;
import ui.map.MapElement;
[code]...
