I have editable grids which are 2-way binded to my model. What I want is to validate my data when user edits any cell before it get updated in model. I have applied my validation at ItemEditEnd handler, but, I want to apply validation in between itemEditBegin and itemEditEnd events.
View 1 RepliesI have a DataGrid, with itemEditor as NumericStepper in a few columns. When a value in the DataGrid is edited, I would like to update several values displayed on the screen, and so want to call a updateValues() function.First, I added this function to itemEditEnd event of the DataGrid, but the function is getting called before the new value is updated into the dataProvider and hence, the values I have in the function are the old values. Is there any other event that is fired after the values are updated into the dataProvider? or am I missing something?Second, I tried putting this function in the change event of each itemEditor (duh!), but then again, the change event is fired, but the values in the dataProvider are the old ones.Is there any way I can make the function updateValues() be called, every time a value is edited AND updated into the dataProvider, because there's where I am taking the values from?
View 1 RepliesThis might be an easy one for you DataGrid experts out there. I following an example for adding rows to a DataGrid dynamically from within a row
[URL]
My tweak that I am trying to acoomlish, is to have a custom itemEditor that is a form with two TextInputs and an OK button. For the life of me I can't get that button to trigger the DataGrid's itemEditEnd event where I have some processing before I call destroyItemEditor. I tried dispatching the event myself directly but got a strange error in DataGrid's updateDisplayList saying editedItemPosition was null (editedItemPosition.rowIndex).
I am working with flex's datagrid. I have a DataGridColumn defined as the following, where labelFunction would allow me to display a custom text. I am also using a itemEditEnd handler on the grid to manipulate the entered data for this column. The purpose is to take the user input and split it then store the result in different properties other than "fixedValue". My problem with this approach is that I can't find a way to prevent assignment to the fixedValue property (which doesn't exist).
And using event.preventDefault() in the itemEditEnd handler would stop other events from happening like changing the row from edit mode to the view mode. My question is that if there is other way to achieve the same thing, or a way to just prevent the assignment of the "dataField" data. I am using the dataField to identify the column I am editing. Leaving it null might not be an option.
<mx:DataGridColumn id="columnFixedCurrency" labelFunction="fixedCurrecy_labelFunc" dataField="fixedValue" headerText="Price"/>
I have a List component that has drop-in CheckBox itemEditor that also serves as the itemRenderer. It displays each item as a simple CheckBox with a label.
However, the itemEditEnd Event does not get triggered until I click on something outside of the List. I want it triggered once the CheckBox is checked or unchecked.
I was thinking of manually dispatching the ListEvent.ITEM_EDIT_END in a CLICK Event handler, but then the itemEditEnd Event would get dispatched twice. There's gotta be a better way to do this.
I hava a custom component and it contains a child icon. If I add a mouse-click event listener to both component(click-listener1) and icon(click-listener2), the event dispatched sequence is click-listener2, then click-listener1. I can understand it. But if I add a custom event to component (listener1), and mouse-click event to icon(listener2), when icon is clicked, the component will dispatch the custom event. In my test, the event dispatched sequence is listener1, then listener2. It doesn't match with event-bubbles rule.
In my opinion The custom event is dispatched in listener2, which triggers listener1. Why event flow sequence is not listener2, listener1?
In component.
icon.addEventListener(MouseEvent.CLICK, iconClickHandler);
private function iconClickHandler(event:MouseEvent):void
{
[Code].....
i have a question to ask about asynchronous key controls This was what i did
[Code]...
and i checked with [URL]...?newspage=6249 and it looked more or less the same, so why is it that when i move my character and when i hold down a key, it just keeps on listerning to that keypress event listener, instead of just executing the other event. So say, i tap left and after which i tap right, it will work just fine, but if i hold left and tap right, the event listerner will still be listening to the left key. So, i was wondering could anyone point me in a direction as to how should i make my code stop listening to an event as soon as another event has been dispatched?
I am trying to learn JavaScript and I am wondering whether JavaScript has a event listener just like ActionScript's ENTER_FRAME. Basically, I want this event listener to listen "all the time" not just wait for any particular instance (mouse click, keyboard event) of event.
View 3 RepliesI am having trouble using a custom event in flex. I need to dispatch an event from inside two nested components and receive it in the main application file. The basic set up is a main application file importing a custom "gallery" component.
[Code]..
what should i do to get chart's data on the click of respective data Legend. suppose i have array [{id:123, label:sales, year:2010},{id:124, label:refunds, year:2010}]for a column chart which has year in x-axis and sales iny-axis.two legend showing labels sales and refund.What i want is to get the whole data (id:123, label:sales, year:2010) on clicking of the legend 'sales'.What should i do? I tried listening mouse click event and itemClick event.
View 1 RepliesI am trying to understand event propagation in Flex framework and have a following doubt on it:
Scenario: I have a built-in component DropDownList on change of which I want to create a custom event refreshPreview and want to propagate it to a custom component PictureComponent.
In the custom component's mxml, I have added the Metadata directive as follows to register a refreshPreview event with the compiler
<fx:Metadata>
[Event(name="refreshPreview", type="flash.events.Event")]
</fx:Metadata>
Layout Details: In my main mxml application I have laid out DropDownList and the custom component such that both are siblings (i.e. have a common indirect parent)
e.g.
<s:Group id="contentGroup">
<s:Group id="formGroup">
<s:Form x="11"
[Code]....
I am seeing that the refreshPreview event is not getting propagated to the custom component.
I doubt this is because the built-in component is a sibling of the target (where the event got generated) and not a parent. how to make refreshPreview event propagate to custom component?
printableInvoice.addEventListener(batchGenerated, printableInvoice_batchGeneratedHandler);Results in this error: 1120: Access of undefined property batchGenerated. I have tried it as FlexEvent.batchGenerated and FlashEvent.batchGenerated.
The MetaData and function that dispatches the even in the component printableInvoice is all right. It I instantiate printableInvoice as an mxml component instead of via action-script it well let put a tag into the mxml line: batchGenerated="someFunction()
in flex application i have a button and two functions in action script. wat i wan is when i click the button it has to call a function and Abort and call another function simultaneously.
View 1 RepliesI have a repeater component with custom event. My repeater components fires custom event holding data. My need is to dispatch event so other repeater components can access data from dispatching component.
Edit: Added whole stuff here.
<!-- AttributeMapping.mxml -->
<?xml version="1.0" encoding="utf-8"?>
<mx:Canvas xmlns:fx="http://ns.adobe.com/mxml/2009"
[Code].....
If I have a Global Variable Globalvars.vars.noLoaded which is in many classes How do I create an event where i detect to see if it reaches a certain number.
[code]...
The app I want to build is an interactive map for a site I'm designing. In a nut shell, students looking to enter an exchange program should be able to use the map-image (as in, an actual 'map of the world') to preview possible destinations (I've attached an image of the two basic states to clarify).
After an introductory animation, I want a mouse-over to trigger a function that populates the map-image with a series of buttons. I need the buttons to be distributed according to information in an XML file (ie. x/y coords, some information text, and an animation to load upon being clicked). I want each button to call a mouse-over function that loads info data from an XML field and place it in a dynamic text field at the top. Then, I want each button, when clicked, to call a function that animates replacing the map-image with an image of the corresponding travel destination. Finally, I want a button on each image that will clear that image from the stage and call the function that populates the map so the process can start again.
I'm working out of a couple of books on AS3, but I'm a little hazy on how I ought to be constructing this thing. So here's the first place I've run aground: After the intro animation, I want the user to mouse-over the stage and have a second animation play (clearing away the introductory text), and I want the conclusion of the clearing animation to immediately call the map-populate function; but I don't want a mouse-over to have any effect until the introductory animation is finished. Is there an event dispatched automatically at the end of an animation? What is the event listener class?
I'm not sure if I should be storing each of these animations in an independent .fla file or if I should create them on all one timeline and have the program redirect to specific frames.
I know the difference between the two, but I never felt the need to use the bubbling feature. If I want to listen to an event from a deeply nested children, I always use the capture phase. Could someone explain to me why I should rather use bubbling, its advantages, and maybe show me a situation in which bubbling would be the only solution?
View 5 Repliesif I have an event listerner (mouse, keyboard, enterframe,....event) that is being triggered, and when it finishes its event, something that is able to detect the finished event listener and fire out another sets of event.
It works more like MOTION_FINISH in TweenEvent, but it is only available for TweenEvent only, what if I want to detect a mousclick, keyboard, enterframe or even touch event?
In all the ActionScript examples I come across, people write custom events with the types defined inside the custom event's class definition. But, in my experience, it makes more sense for the object dispatching an event to own its own definition of that event (which, in ActionScript 3, is a String).
[EDIT: After writing this question, I've found there to be cases for both positions -- in some situations, event types should be stored on the event object, and, in others, they should be stored on the object dispatching the event.]
In my AIR application, I try to dispatch a custom event from a class to main window.This class is use to call httpservice. My goal is to send a custom window when the httpservice result is send.[code]...
View 1 RepliesI would like to extends the Event class to add some events I am using in game. But I don't want the new Event Class to have the old public static types. For instance I don't want to have:
NewEventClass.ENTER_FRAME
How do you go about extending the Event class without getting the old types mixed in?
Is there any way to outsmart AS3 to leave out the uneeded types?
Or should I avoid creating a new Event type altogether and just add the new strings?
My stage has about 25 buttons on it. Each button when pressed to tweens the background to some random x/y coordinates and then loads an external swf file.This is all working, but the timing is off. How can I wait for the initial background tween to end before I make the loader call to the .swf file.Currently each button's behavior is called on the MouseEvent.CLICK event which calls a function that knows its unique filename.swf. I know you can add the MOTION_FINISH even to the tween event but then I would have to call a new function and lose track of the button that initially called it.
View 3 RepliesI'm moving on to my next massive programming project and I'm trying to decide whether I should code it in as 2.0 or 3.0. I came across the new click event model in 3.0. Right now it's looking like a pain in the butt to me. So now I have to make a function and add it as an event listener? what the hell? What's the benefit? I understand stuff like this makes AS a more complete language but it's kinda annoying.
View 1 RepliesThis is NOT duplicate of my earlier post (its is slightly different)But this is similar issue with similar error but its not the same error The error I am getting now is below while dispatching the custom event from my custom component
TypeError: Error #1034: Type Coercion failed: cannot convert events::MapEvent@a74ab51 to flash.events.MouseEvent.
dispatchEvent(new MapEvent(MapEvent.CLICKED_ON_MAP));
Note: The error in my earlier post is giving below error message
Type Coercion failed: cannot convert flash.events::Event@81ecb79 to com.events.ShopEvent
The difference here are two things, the earlier error is while converting flash event to custom event and now this one is while converting custom event to flash event and secondly, I have no clue why it is trying to convert to the mouseevent where I am just dispatching my custom event with proper listeners.
This is my custome event
package events
{
import flash.events.Event;
import ui.map.MapElement;
[code]...
How to trigger a custom jQuery event from Flash, passing some data through event object?
View 2 RepliesI was having a go at a tutorial which worked fine but then I started seeing how it would work in an external file. Object Oriented Flash. On line 27 it picks up the following error... 1046: Type was not found or was not a compile-time constant: Event. //function enterFrames(e:Event) I've tried this for myself but what are the function parameters I need to mimic the same motion of the bouncing ball?
[Code]...
I'm newish to OOP AS... trying to build a image loader that wipes between loads. having trouble getting my onloadComplete event to call a method in the main body of the class. what am I missing?
[Code]...
I have this in my constructor:
[Code]..
The problem is I get Error: Error #2094: Event dispatch recursion overflow. Why does removechild keep getting called if this.parent does not exist? Why doesn't removing event listeners work?
I'm programming a little tank game (Check the attachment). The main class for tank is game.serovkonstantin.tanks.Tank.as and there are also 2 subclasses for now: Abrams and T90 which extend Tank. In my game.serovkonstantin folder I have a custom event (TankEvent), and the only event type inside of it which is TANK_INACTIVE.
I've added an event listener for MouseEvent.CLICK to each of the tank instances (inside Tank.as) which works just fine. When I add any of the tank instance onto the stage and click it, it traces the tank's name just like I wanted whether it's Abrams or T-90 depending on what tank I clicked. But the problem is that when I click a tank I also want it to dispatch my TankEvent.TANK_INACTIVE. The main stage has a listener for this event, so I expected it to catch the event and trace some phrase, but nothing happens I don't know whether it doesn't dispatch my event or doesn't catch it.
========
if you're interested why I need to dispatch this event, well,I suppose it will help my game know what tank to move when I click somewhere on the stage, and what tank(s) should be inactive,event it they all of the same type. I mean if I click one of the tanks it accepts all the controls while the other should be inactive
This is a very basic question but I can't seem to find an answer. I have a mouse over event and have created the buttons with the mouse overs which is working great. I created the actionscript to go to a specific web page when a user clicks the button. Now, I need to add a label to the mouse over so when someone mouse's over any area of the button, it will show them a particular name for the button.
I am sure that this can be done using actionscript in a mouse event roll over command but I can't figure out what I need to show the text. Here is where I am:
[Code]..