I've nearly sorted my previous problem, I just need a bit of help with getting the rollover image to disappear again once the mouse has left the rollover area. would anyone be able to take a quick look at the fla?
View 2 Replies[Code]...
Ok ... so i think this is related to bitmap caching however the "this" is a dynamically created object that then dynamically has a .jpg placed inside of it. I want the object to disappear on rollOver and go back to normal onRollOut. But i can't figure out how to assign bitmap caching to the dynamic jpeg or this.movieClip as they are both dynamic.
I want the cursor to disappear when it rolls over an object, then reappear when it rolls off. It works when I run it in Flash, it works when I view the html in Internet Explorer, it DOESN'T work in Netscape. The cursor disappears and doesn't come back till you move it out of the navigator window. Here's the code:
on (rollOver) {
loadMovie("movie.swf", place);
mouse.hide();
} on (rollOut) {
loadMovie("blank_movie.swf", place);
mouse.show();
}
#1. How do I get a movie to close after it has played?
#2. In my menu I have 8 links. I'd like to have 7 links disappear when the user rolls over the 1 link. How would I make the other 7 disappear when the user is rolled over 1?
This shouldn't be too difficult, but what I have is a button, which in the 'over' state I want to load an external image, and then have the image disappear when the users mouse hovers off the button
View 2 RepliesI have a button set up, that when you rollover the button, it changes into another picture and stops, and also when it's rolled over, a large picture appears under the rollover.But when I first rollover the button, it acts like it's told to go to the out state. When I rollover it again it works fine.URl...there is my code to go into the movieclip and play the button
View 1 RepliesI'm currently working on a flashsite and are trying to figure out rollover menu buttons. The site has 6 menu buttons and are placed next to each other. I want to put a rollover action on the buttons, that when you rollover a button that the whole button image enlarges and moves in front of the other.
View 1 RepliesWhen my mouse leaves the thumbnail image the previewArea image stays there. What is the coding to make the image disappear once the mouse leaves the thumbnail? I think that it's either in the previewLoaded or tn_out is where the script should go.
function previewLoaded(e:Event):void {
var flashmo_tn_bm:Bitmap = Bitmap(e.target.content);
flashmo_tn_bm.smoothing = true;
[code]....
If I have a button on my screen that I want to make a box appear when clicked, how would I go about doing that? It also needs to disappear after 10 seconds. I am not sure if this is an issue, but it needs to appear on the screen while everything else is happening underneath it. So the rest of the animation must continue on as this appears above it.
View 7 Repliesi want to show a bigger image when the cursor is over the smaller version.
View 9 RepliesI need to make a series of 35 buttons that display an image when clicked. However, I need the previous displayed image to disappear when any other button is clicked.I have this to toggle the images on/off:[code]Any idea what I can add to the function to turn all the other buttons visibility to false when any other button is clicked?
View 2 RepliesI have just started using flash. I needed to do this presentation for a client. In one scene I have provided him with a photo-gallery, where some 30 photos are placed randomly ...when playing the movie (published as projector) user will click any photo to watch it. For this I have used swapdepth so that photo, user clicks comes to front. Also applied drag to all these photos.
My code look something like this:
on (press, dragOver) {
startDrag(_root.pic6);
} on (release, rollOut, dragOut) {
stopDrag();
} on (press, release, dragOver, dragOut) {
_root.x +=2;
_root.pic6.swapDepths(_root.x);
}
For doing this first I converted the photo to button ...then converted this button to a movie clip and gave a instance name to this. Then I went into the movie clip and applied the above code to the button placed inside the movie. Applying all this to all photos I placed them randomly on timeline. The problem is : code is working fine, it is dragging photos, bringing them to front etc. But I have user to go back and play another scene to continue the presentation. Problem starts here, the last photo clicked by user remains there, even though it is not present in that scene.
I'm running into an error 1009 on a script that I've been working on. What I'm trying to do is attach a preloader Movie Clip that I have in my library with a class name of preloader, to an empty Movie Clip called preloaderMC and position that on a set of loaded thumbnail images. I can get the code to show one preloader and it will track the total of all the images being loaded, not single images. Ideally, I'd like the preloaders to show the amount loaded for each image and then disappear.
View 5 RepliesI watched all 3 Carousel tutorials but can not figure out how to use an image instead of dynamic text for the rollover bubble that appears above each icon.
View 3 Repliesam trying to find a way to display an image (a shelf with various pieces of art.) I want each piece to be a link where the user can click on it, and it will pop up in a new window, or an area below the main image where it will show a larger, up-close view, with details, such as price, meanings, ect.
View 3 RepliesAll I want to do is move an image a pixel at a time to the left on rollover on a button.
This is my script so far:
on (rollOver) {
background._x = background._x -=1;
}
This only moves it once then you have to take mouse off then rollover again to move again
What i'd like to incorporate is a loop so ( only whilst the mouse is over the button) the image keeps moving to a maximum of 300 pixels then it can't move any more ( unless the right button has mouse over )
I have that 3d carousel that pulls from an XML file. It works great. I have altered to however, to use the tool tip rollover as well as I added an image swap. Again that works...BUT the image swap is very jumpy and touchy. Is there a trick to making a loadMovie swap smooth and not jumpy. Here is the code that is doing the call and swap
[Code...]
I am creating a little flash movie, nothing major and I want something to happen. When a user rolls over a button, a image fades in somewhere else on the stage, possibly below the button being rolled over. Then when its clicked (the button) the image (possibly) expands and text is showed while the background is faded.
View 5 RepliesI have an image contained within a slideshow with a rollover attached to it, when you click the image a larger image within the same movie clip appears. This layer is below my navigation layers for my website so when I click on the image it is below some of the navigation layers and logo. Is there a way to make this appear on top of all of the other layers without actually moving the layer up. I'm using Flash CS3 and Actionscript 3.0.
View 1 Replieslooking for a script that loads 6 logo image thumbs into a grid (randomly from folder), with each thumb having a rollover image and link.. Basically the logo area on this page : I have about 30 client logos in greyscale ( and colour version for rollover), and need to randomly load 6 logos at a time (or random individually) on a timer. oN RollOver. loads colour version of logo with link node in XML Something like...
[Code]...
I have a dynamic textfield that is html formatted and loads text from an XML file. On the XML file I have the following image that contains a link:
Code:
<a href="link here"><img src="image.png"/></a>
How can I add border on image hover using CSS?
I have a big image (1600x1200) Which obviously doesn't fit in the window. How can i have it so when i hover the mouse the image moves. Basically a Yugop scrolling effect but in all directions
View 3 RepliesI have made a bitmap image into a rollover button - reason - so that when the mouse rolls over the hit area of the button/image/thumbnail - it becomes larger on the stage and when the mouse moves outside the paramaters of the larger picture it goes back down to the original button/image/thumbnail size.That works fine.However . . . there is always a however. When I implemented the same functions to the other thumbnails on the stage - if I rollover the second thumbnail- the other thumbnails show up (through) on top of that enlarged image.
View 7 RepliesI have a menu that when you click on a button, an external swf is called up. However I would like for the buttons in the Over and Down state to show an image on top of the external swf with a description of what the video is about (Basically when they rollover the button).
The problem is that the image shows behind the external swf. I cannot get it to appear on top of the external swf. I have tried putting the buttons layer on top of the actions layer but that doesn't work.
I want when user roll over on my image it shows a part of big image of the same picture i known its possible in flash but how i don't Known ?? here is the link of the live example the site use the same technique in flash
click here
I am trying to create a site with a 3D background image (which I converted to a MC). I created 2 buttons that, when rolled over should move the background image ('bgMC') to pan either right or left (depending on if the user rolls over the right button or left). I've attached the code I'm using below, if anyone has a better code or knows how to use btnRt or btnLeft to make bgMC pan to the X,Y coordinates in 'goLeft' and 'goRight'.
import fl.transitions.Tween;
import fl.transitions.easing.*;
import flash.geom.Point;
[code]...
I have a menu that when you click on a button, an external swf is called up. However I would like for the buttons in the Over and Down state to show an image on top of the external swf with a description of what the video is about (Basically when they rollover the button).The problem is that the image shows behind the external swf. I cannot get it to appear on top of the external swf. I have tried putting the buttons layer on top of the actions layer but that doesn't work.
View 1 RepliesI'm building a flash web site, this site contain images in 5 pages, i want to do an effect when rollover of any image ( make image brightness 100 and fade to 0 ).
View 4 RepliesI have a movieClip which receive a function of a bottom on release and on RollOver. What I want is when the RollOver the image gets bigger and then when RollOut the image gets the normal side (initial size)....
View 3 RepliesI started using AS3. At the moment I'm working on a project with (small) image galleries. When you roll over a small image, there's a larger version showing up, and the thumb changes also. You can also click the image, and then a lightbox effect pops up. To achieve this, I'm using the following script, which works fine:
Code:
img1ro.visible = false;
cl1.visible = false;
btn1.addEventListener(MouseEvent.MOUSE_OVER, over1);
btn1.addEventListener(MouseEvent.MOUSE_OUT, out1);
btn1.addEventListener(MouseEvent.CLICK,lightbox1);
function over1(event:MouseEvent):void {
[Code] .....
But I was wondering if there's an easier way to add images. At the moment, I copy-paste the script, and have to change the numbers according to the number of images. Is it possible to put the images in an array or something like that?