I've managed to create some small and successful movie animations which loop when place on a website.What I'm trying to do is to have a movie which has a intro section which plays for about 15 seconds or so then moves onto the main body of the movie which then loops without showing the intro section again.
View 3 RepliesI need a skip intro link in my movie that, when clicked, goes to the last frame of the movie and plays it.
View 7 Repliesi want to make an intro swf which is small and loads quickly but i would like the main swf to start loading while the intro is playing. i'm not worried about the intro finishing once the main movie is loaded but i just want to the main movie to START loading while the intro is playing to cut down on load time.
View 1 Replieshow, because I have lets say 5 transitions and each swf has an intro and an outro, and I want to make it so if you click lets say wallpapers, theres a little loader at the bottom right of the screen that preloads the wallpaper transition, without yet playing the outro of the current transition your in (home lets say), Is it possible to script it so that when flash detects that wallpaper transition has fully preloaded it will play the "outro" part of home and than play the intro part of wallpapers to create a seamless transition
View 3 RepliesI have lets say 5 transitions and each swf has an intro and an outro, and I want to make it so if you click lets say wallpapers, theres a little loader at the bottom right of the screen that preloads the wallpaper transition, without yet playing the outro of the current transition your in (home lets say), Is it possible to script it so that when flash detects that wallpaper transition has fully preloaded it will play the "outro" part of home and than play the intro part of wallpapers to create a seamless transition
View 3 Repliesi have imported a movie that i created in After Effects and exported as an FLV. I imported this into flash as an embedded FLV file. When i go to the last frame and enter the scipt.......
stop();
getURL("http://www.randolphmusic.net/main.html", "_self");
it tries to go to the url before i play the movie.
If i try to make a keyframe there i get a message and it cuts the end of the video at the point and starts it over a second clip in that same timeline. I have tried creating a tween from it then putting in the script, i have also tried this with a classic tween.
I want my movie to loop. Would prefer an If/Else loop so that the movie plays a certain number of times then plays the opening of a screen then stops. This is a simple 4 screen ad I am doing for a school project. Can't get it to work. I tried containing my code in the proper loop syntax, didn't work. Then wrapping the loop in a function and calling that with a timer event, didn't work. My final solution was to call my whole movie in a timer event set to play once. Then calling the entire movie again in a second timer event set to play 20 times and set to start at an interval when the first movie ended. This did work but each time the movie plays thru function calls drop off making the movie degrade.
[Code]....
I made an intro animation for a website. Packaged it up into a movie clip, selected "Export for ActionScript", dragged it into my timeline, and gave it an instance name (myIntro_mc).
This is not an exported swf... it only exists in my library as a symbol (and what ever folder of classes it goes to when you export for action script).
The intro plays some animation, has a button to continue to the site, plays some more animation and then stops.
The movie clip is in its own layer and has 4 frames of the main timeline.
If I don't tell the main timeline to stop in frame 1, the intro never shows up... playback goes directly to frame 5 (which is the home page).
If I put a stop(); in the first frame the intro plays and stops and the main timeline never resumes.
I can't sort out how to tell the movie clip to play the parent timeline when it reaches the end... nor can I figure out how to wait in the main timeline for the intro to finish playing before resuming the main timeline.
I've been gnawing at this an embarrassing amount of time and have tried all sorts of bad code in both the main timeline and in the child movie clip.
I'm creating a flash intro and i was wonder how i would set it up so that the intro only plays the first time the viewer views the website. so that the next time they visit it takes them directly to the main page. this is dealing with cookies b/c once they clear their cookies it would play again.
View 5 Replies[URL] Some of the clips play fine, others play for 2 seconds and then stop.
View 2 Repliesi have a soung loop that i want to "loop" in my movie.this is my script:
mySound = new Sound();
mySound.loadSound("loops/music.mp3",true);
the problem is that it only plays once (5 seconds long) and then stops, how do i get it to loop? - short of placing it on the timeline.
i have a soung loop that i want to "loop" in my movie. this is my script: mySound = new Sound(); mySound.loadSound("loops/music.mp3",true); the problem is that it only plays once (5 seconds long) and then stops, how do i get it to loop? - short of placing it on the timeline.
View 8 RepliesI have a button that I would like to use with the basic actionscript as follows:
on (release) {
this.gotoAndPlay("15");
}
What I would like it to do is play a section on the timeline and then move onto another section or scene.
[Code]....
I know this is incorrect, so would anyone know how to write an actionscript button that plays a section then goes somewhere else?
on [URL] what is the word 'section' in _root.section? I assume it is a movie clip instance, but can't seem to find it on the timeline.
View 2 RepliesIf I have an FLV that I've output as SWF with skin to have embedded into an HTML page, and now a 'skip intro' is needed - though I'd have to make note of the actual time or keyframe in which the intro completes...How is this possible? Clearly, a button would need to be added for that kind of interactivity?
View 3 Replies[URL] if you go into my movie section. i want to add movies to my section if i copy for exemple Audi commercial. i'll have 2 that's great when it'S time to change the name like Audi to Marli it will affect the first one, the original section that i copy too. that's my problem. how can i copy a section to be indivudual. without affecting the first one. cause after that i can go and change everything.
View 1 RepliesIf i set-up a scene with buttons and interface i want to press a button to load a movie but not covering the whole page (template) just to be shown in a section, how do i got about doing that?
View 1 RepliesI have a movie clip that I imported into flash, used a skin and have a nice little player for this website intro. I want to proceed to the sites home page upon completion of the movie. Searched but the best I could come up with was;
player.addEventListener("complete",function (event:Object) { trace("doneVideo");new URLRequest("my link");});
On my site I have 5 buttons for navagation along the top, when you go to the Photos section there is a button that appears on stage and, when clicked, loads an external swf onto the stage, no problems so far.If I or the user clicks this button to load this external swf onto the stage and then clicks one of the other navagation buttons to go to a different section of the site, that external swf doesn't disappear.
View 1 RepliesHere is the current code that is attached to the button
[code]...
Now what I am having an issue with is the gallary section is to small as it loads into the bottom of my movie (_parent). What I have decided to do is stop this process all together and have it go to a new url in a new window. Which is basic for you guys. If I take out the code under the on (release) section is it just a matter of a gotourl to get the page to open. The website is www.daemondesigns.com and originally was purchased as a template and so far have been able to put in all the new graphics and make text changes correctly with a few minor adjustments still needed. Ive got a book on actionscript 3.0 that I am just starting to make my way through but have a deadline that I may not make for this new gallery.
I have a movie clip that I uploaded as an .flv (so I could have the sound) as something on the timeline. I set up a button below the video to skip to the website (or welcomePage)However, I cannot get the button to work for some reason. Below is my script, am I missing something? Also, for whatever reason, now my movie clip does not autoload when it did before...I also do realize that I could probably condense the timeline, but I am just working teaching myself, so bare with me.
stop();
home_btn.addEventListener(MouseEvent.CLICK, welcomePage);resume_btn.addEventListener(MouseEvent.CLICK, resumePage);reel_btn.addEventListener(MouseEvent.CLICK, reelPage);photos_btn.addEventListener(MouseEvent.CLICK, [code]....
I have an intro movie for my website, I know how to make it load another URL after it has played but how do I get it to load another swf. I know there is an easy answer that is escaping me.
View 1 RepliesI have a very simple problem here, I have googled around for awhile but it seems that its impossible to find specific flash subjects. What I have is 2 files, one is the intro movie for my flash project and the other is the menu. I need some action script 3 to end the intro and load the menu in the same box,
View 2 RepliesI want to put audio on my intro movie [we're currently developing a game]. Once you press start button, a movie clip is being played together with an external sound. As soon as the user hits the skip button, the sound stops and you'll proceed to the main game. I cant make the sound STOP.
Code:
stop();
var introSound:Sound = new Sound();
var myChannel:SoundChannel = new SoundChannel();
introSound.load(new URLRequest("intromusic.mp3"));
function intro(e:Event):void{
[Code] .....
If I do this, the audio will play the moment I run it [and I don't want that to happen. the audio must be within the intro movie only].
Code:
stop();
var introSound:Sound = new Sound();
var myChannel:SoundChannel = new SoundChannel();
introSound.load(new URLRequest("intromusic.mp3"));
myChannel = introSound.play();
trying to build a movie which has an intro animation (small one) using a tweening-playground, build a preloader into an mc that innitializes when the intro is done buuuuut it goes kinda weird, i uploaded the mc so if you could take a look at it
[URL]
When i make my flash intro to a movie my text wont show up can some one help??
View 8 RepliesI wouild like to Play a movie clip in a movie like once every 120 seconds. Are there actionscripts whichs does this? Using Flash MX....
View 3 RepliesFlash CS4/Actionscript 3 I am trying to create a section for a site where mousing over a button will play a certain frame of a movie clip, which is sitting next to the button. Mousing over different buttons will play (and stop) different frames in the movie clip.
View 1 Repliestrying to build a movie which has an intro animation (small one) using a tweening-playground, build a preloader into an mc that innitializes when the intro is done buuuuut it goes kinda weird, i uploaded the mc so if you could take a look at it
View 14 RepliesI have a flash intro on my site and i would like to create a cookie so that if you have already seen it it takes to a specific frame in the movie is this possible?
View 1 Replies