when i Control > Test Movie with an animation, the preview is not cropped to the stage size.i see eveything out in the grey, which i don't want to see. i just can't find the right settings, if they exist.i'm assuming the stage is akin to the page bounding box in illustrator, so test movie should behave like 'print preview'?
View 3 RepliesI am using Adobe Flash CS3 and press CTRL + Enter to preview the movie , but now I Cann't do it , the movie isn't display anything ( but I can preview only one scene by press CTRL + ALT + Enter). I try to publish the movie, the error message is not display but when I test debug . Flash shows the message that "Error open file 'my flash file path'+.swf" How can I reslove this problem
View 2 RepliesI've been fighting this one for weeks - I've tried changing the Document Properties, Publish Settings, and even placing huge white boxes behind the clips I want to preview ... all to no avail! What gives?
Basically, whenever I'm inside a nested movie clip, and Test Scene (Control-Alt-Enter), the animation is centered in the upper left of the stage, so I can only see the bottom-right quarter of the animation - the rest is off-stage and not visible!
I created a first movie 750 x 235. Objects in this clip are often larger than the final document bascialy sticking out of the scene throughout the movie I then created a second document "main page" that will be hosting the first clip. I created a content frame 750 x 235 to host (position) my SWF file and used the loadmovie function. PROBLEM: Everything is showing, even the off screen elements, size is not limited to what I see when I preview publishing. Size reaching 5000 x 3500!
View 3 Replieshow I export the thing (as an image, or a movie, and in any format) I can't see the text. This is especially frustrating because text forms the entire basis of my animation.Tried converting text to movie clips, no difference. The weird part is, I was able to test the thing early on with no problem-- text displayed and everything. I should add: I have used MULTIPLE fonts... and I think this was about when things started not working.I'm working on a deadline and if you know how to fix this, it would make a big difference to my life.
View 1 RepliesI've pretty much finished my site... [URL]. The problem with this is that with someone who has a lower resolution, the movie tends to get cropped. Since I have the movie set at 100% width and height the scroll bars don't exist. I'm trying to make built in scroll bars in flash that will activate when the movie gets cropped as such. I only need them for a few pages. I'm not sure if I am going about this the easiest way..I know you can do it if it was just one movieclip but the site is alot more complicated than just one movieclip.
For skills_mc I have a class..
mc_skills.as
Actionscript Code:
package{
import flash.display.*;
import FluidLayout.*;
import flash.display.Sprite;
import flash.display.StageAlign;
[Code] .....
It's throwing a ton of errors..
1017: The definition of base class Movieclip was not found.
I'm trying to get an object to increase in size the lower it goes down the stage, and decrease in size the high it moves up the stage.
It only needs to increase or decrease by a small amount. Basically, it's for a game character. To ad realism to his movements, it would be nice to have this feature.
This is where i'm up to so far:
Code:
import fl.transitions.Tween;
import fl.transitions.TweenEvent;
import fl.transitions.easing.*;
[code]....
I think I need something like:
if (object moves up)
decrease
else if (object moves down)
increase
how to create a play/pause button to control my movie animation?
View 2 RepliesI'm using Flash CS3 and wish to create a movie where the stage is a certain size but the actual content of the movie extends further than the stage. The user will be able to drag the stage from left to right to show hidden parts of the movie. Similar to the idea of a horizontal scrolling image gallery but without the scrollbar (see attached for example image).
View 7 RepliesWhat i try to do, is to make a "wrapper" in Flash, in which other swfs could be embedded. (passing the URL of the external SWF by URL) to attach a link to the swfs. (ClickTag - Issue, maybe someone knows this).In the HTML - Code this would look like this:
Code:
<embed src="wrapper.swf" ...>
<param name="filename" value="path-to-external-swf.swf"/>
<param name="clickTag" value="http://www.example.com"/>
The SWF "wrapper.swf" should load the "path-to-external-swf.swf" an puts a onClick - Event on the whole area.That works just fine, BUT The loaded external SWF should always fit to the stage size (like 100% width and 100% height) .My code looks like this:
Code:
// Variables should be passed by URL
_root.filename = "http://example.com/animation.swf";
_root.clickTag = "http://www.example2.com";[code]....
Code:
mClip._width = Stage.width;
When i click on the swf, the movie fits exactly to the stage width...
My buttons only work when I click on them on the stage while having the "enable simple buttons" option on. They do not work if I try to "test movie," "test scene" and publish it to a SWF. Nothing responds whenever I am in these modes. I am using Adobe Flash Professional CS5 Actionscript 2.0.
This is the code that I put in for the buttons:
[Code].....
i have a movie that has worked fine in past during Html test but ive been doing some dubugging using the flash test latly and it runs fine here but when i go back and try to test in Html mode no errors come just the movie never fully starts (starts up about as much as if there was an error).
View 5 RepliesDoes anyone know of a way to get Flash CS5 for Windows to preview an animation in a secondary browser?
Dreamweaver CS5 lets you specify a browser as a secondary browser -- pressing Ctrl+F12 launches it. In Flash, however, F12 and Ctrl+F12 both launch the primary browser...
I have two scenes in my flash file and in scene 1, first button takes you to frame 2 where movie clip is -works
on (release) {
gotoAndStop("scene1",2);
}
second button takes you to frame 3
but on scene 2 that performs same function as scene 1, the first button
on(press){
gotoAndStop("scene2",2);
}
instead of going to frame 2 goes to frame 3. and the second button goes correctly to frame 3.that happens when i test scene! when i test movie all buttons work properly.
how I can find the original stage size of an SWF that has been loaded into a parent clip via MovieClipLoader? In the child clip, there are a number of elements that extend beyond its stage, so when I check the _width and _height properties, then they include the stage overlap.
I tried using mc.getBounds(), but it doesn't seem to give me what I'm after.
I have an MC which is sized as follows:[code]This is fine until the stage size is altered....as the MC stays the same size unless the page is reloaded.How can I set the size of the MC so it resizes as the stage size is altered?
View 3 Repliesif for example I'm creating a scene with falling snowflakes. In the movieclip is there a way of correctly knowing which area of the main scene you're working in? Or is it just a case of creating the movie, then returning to your scene and placing in where it's appropriate?
View 3 Repliesconvert animation on the stage into a movie clip?
View 1 Replieshow do you control the backround colour of a movie clip and the stage? i have thought about placing a mc within the mc as a backround_mc, then change the tint attribute from my main timeline, is this on the right track?
i have a movie where a user loads images into an image viewer (mc) i have craeted. If a user clicks on gallery 1, the loader appears, and load the jpg and then tells the viewer to show onceloaded. But, if a user clicks on gallery 1, then clicks on gallery 2, the movie finishes loading picture 1, before loading picture 2, is there any waqy i can force the loader to stop loading one,a dn load two immediately.
I have careted a class, now, how do i assign an mc to be an object of that class, from the main timeline or the onclipevent load event
I have a stage with an external SWF loaded onto it. The stage scales dynamically to fill the size of the window.
Two problems: - I want certain items inside that loaded SWF to scale horizontally and vertically to fill the size of the stage.
- I want other items inside that movieclip to stay the same size, but be "attached" to the top and left of the stage.
When I preview my flash file it says that the filesize is 29kb. However when I look at the properties of the outputted swf it's coming in a t 36kb. Which is the correct size? Also what extra information is being added to push it up by 7kb?
View 9 RepliesWhen I preview my flash file it says that the filesize is 29kb. However when I look at the properties of the outputted swf it's coming in a t 36kb. Which is the correct size? Also what extra information is being added to push it up by 7kb?
View 2 RepliesWhen I try to rotate a movie clip along the x-axis on the default stage size (I'm using a basic rectangle right now), the rotation appears just as I expect it to. It "rolls over" with the perspective even on both sides of the rectangle.
When I try to duplicate this in a movie with different dimensions (320x480) and apply the 3D Rotation Tool, the rectangle skews to the left for some reason. (See attached .fla files)
I've tried changing the registration points on the movie clips, I've tried making new files with the "Adjust 3D Perspective Angle to preserve current stage projection" box checked both on and off, and I've tried repositioning the actual Rotation Tool, but I can't figure out what's wrong. Could it have something to do with the stage resizing?!
After hitting next on this animation you can see there appears to be blank areas on the animation. If you mouse over them you will see buttons appear which is their "over state." When I publish the animation and preview it in Adobe Flash CS5.5 all the buttons are visible and work correctly. It is only in the brower (chrome, firefox, safari) with up to date Flash Player that is is not working. This is happening in a number of animations I created originally in CS4 last year, and am updating them as CS5.5 using AS3.
View 5 RepliesI try to put boxes from library on the stage.boxes must appears random + must be on the stage(ie stage = 550x400) + boxes can not intersect[code]...
View 14 RepliesI made nine frames with different jpeg images (on three Layers, which suit to different day's timespans), then I added actionscript. It gets date from system clock, according to hour - chooses timespan (morning or evening, midday or night) and display one of three frames for this time (randomly). But, when I test the project in preview (ctrl+enter) I have still first frame or empty Stage without any images. It works properly when click on Play in context menu.
View 6 RepliesI have a ball in a page and a stopwatch.
The stopwatch works fine starts on page ready.The ball moves using the arrow keys.
But i am just wondering how can I create some kind of boundary, (which will be the size of the page) which when the ball collides with it or goes out of the page the stopwatch will stop?[code]...
I'm using CS4 and want to test the step() for fastforword control, but I was unable to call the step() function.
View 6 RepliesIs it possible to test only a section of animation in a timeline? I'm trying to refine the last bit of animation at the end, and would prefer not to watch it all from the beginning again.
View 8 RepliesI'm working on a slideshow where I'm calling in photos from an xml file. How do I tell AS to resize the stage according to photo dimensions? Would I need to list the dimensions in the xml file? If so, how would I pull that into the fla file with AS?
View 6 Replies