Bring The Video Into Flash And Export Out Of There To Get The Transparency?
Nov 24, 2009
I have created an animation using illustrator files in AE CS3 and now want to convert this to flash so it will play on my website.The problem I am having (or rather my web designer) is getting the transparency in flash.
1. How should I export out of AE
2. Do I need to bring the video into Flash and export out of there to get the transparency?
3. Can this workflow even be done?
4. What is the best way for me to deliver the files to my web designer?
I have attached a movie file of the look I am going for. The birds were done in AE and I want them to move across my home page.
Attachments:Hone Bird Anim DEMO.mov (983.4 K)
View 3 Replies
Similar Posts:
Oct 21, 2009
What's the best way to bring in an image with transparency in Flash CS4?I have a logo in Photoshop that looks great on a black background. But when I bring it in as a GIF or PNG in Flash, the edges get really jagged.Is there a preferred way to import this so the edges are smooth?
View 2 Replies
May 15, 2008
I've tried to export my vector work from Flash to Illustrator. The result is bad : colors have faded and transparent colors became opaque. It is a shame that Flash doesn't provide a correct export function to
Illustrator now that Flash and Illustrator are both Adobe's softwares.
View 1 Replies
May 12, 2010
Are they decompiling the flash or something like this? I can't imagine how they have done it.
View 1 Replies
Dec 18, 2010
I made a video in After Effect and export it to flash as a FLV video.. and write de code to load it into flash.. but I need it to loop.. Here is the code
[Code]...
View 1 Replies
Sep 28, 2010
I have Flash CS3 and I want to export my animation as a movie. However my animation is in a clip and my clip is on the timeline. For some reason it only exports the first frame of the clip.
View 2 Replies
Nov 3, 2009
I have to export my animation to a video file type such as .AVI or .WMV to put in on a DVD. Using the export function in Flash delivers a kind of blurry videofile with too much noise. Is there perhaps another way (or another program) to convert .FLA (or .SWF) to video? Install better codecs, maybe?
View 3 Replies
Dec 6, 2010
export an animation sequence from flash to a video format. Looks like flash has Quicktime and Avi as options. However they both produce poor and jerky results. My animation is 750 by 545 pixels and running at 20fps - I have tried upping it to 25fps to see if it is a frame rate mismatch issue but similar rsults. For the record the anim plays perfectly as a swf. I have tried a third party swf to flv converter as flv is the format I desire but still jerky irregular playback
How can I get around this?
View 3 Replies
Oct 15, 2009
I'm exporting some 1280x720 HD vid from a typical vector cartoon made in flash. I've used PNG, Animation, and 8bit Uncompressed and still my vid looks pixelated in the fine details. Exporting a still the same size gives clean results. Any magic setting I'm missing to make this look better?
Adding example of pixelated fine lines in uncompressed video.
View 1 Replies
Nov 2, 2010
I would like export Flash fla to video to be played in video player, how should I do?
View 1 Replies
Mar 14, 2012
I am trying to export a flash animation as a mov, so i can convert it for html5. When I export the movie, the animation has artifacts in it, strange things do not erase correctly, they do not show when i view it in Flash, or when I view the exported flv file.
So as you can see, there is a 1/2 drawn image. They round things are floating down, but for some reason, as they float down to stack, they leave behind some partial images.
View 2 Replies
Jun 27, 2010
how to grab the transparency (or alpha value) of individual pixels in an embedded or loaded video? We tried copying over a frame of video into a bitmapdata object with transparency enabled. However, even though we can "see through" the video at certain spots (indicating alpha = 0 there), the alpha value comes back as 0xFF for every single pixel in the BitmapData object.Obviously alpha data is being stored inside the embedded video, but how can I actually get that value?
View 0 Replies
Jan 25, 2010
bring my correct uiloader/swf to the front/into focus when the relevant list item is triggered? This is my code at the moment
Code: Select allimport fl.containers.UILoader;
import fl.controls.List;
var list1:List = new List();[code]........
View 3 Replies
Feb 10, 2012
I created animation using AS3. Actions are distributed in main timeline. I created frame event listener, wich set a current frame of several MovieClips. But when i export video, AS3 isn't executed.
View 1 Replies
Apr 15, 2006
whenever i try to put video into a flash movie it works perfectly, but when i export the movie into AVI it loses the original video's sound.
View 3 Replies
Aug 11, 2009
I am having an issue with turning my SWF into an FLV. I have actionscript that plays some audio clips and of course it all plays fine as a SWF, but how do I get it to retain all of the functionality when I export it to an FLV? The method I was trying is exporting to an AVI, opening up Flash Video Encoder, and converting the AVI to an FLV, but it comes out all messed up. I'm new to this converting stuff.
View 1 Replies
Aug 16, 2010
I'm trying to make a new site (Green DNA) and wanted to use a combination of flash and html At the top, I wanted to have the navigation bar as flash, and below the html content (like for example a blog).I wanted to create some cool animations using After Effects, and import them into flash. I was planing to use around 250-300 frames of animation total (800x270 pixels) and keep it the whole .SWF file below 2MB
My first attempt was to export the video from AE as a .SWF but the result was a 10 MB file Then, I tried to export as a PNG or jpg animation sequence... I was able to reduced each frame to about 27.0kb but the result was around 6mb file Then, I tried saving the animation as a .mp4 file (around 2mb) but I couldn't figure out how to imported on flash (I was using adobe bridge, but It kept changing my 800x270 pixel video into something that I didn't approved ( I tried multiple settings)
View 2 Replies
Nov 22, 2011
I have made my site and now the protocols of Flash wont allow the internet to playback the video, I dont know if you understand me but this is the message I am getting every time I try to open my finished SWF Project."The following local aplication on your computer is trying to communicate with this Internet-enabled location: my site IP" I looked for the location to allow the settings yet I cant find it.
View 2 Replies
Aug 25, 2011
I have created animation using Actionscript and I want to export it as Video . As I understand Flash by defautl can only export timeline animations (no Acationscript) ;/ I need best possible quality. I need solution for windows. I thought about:
- screen video capture tool - do you know good one for this job?
- some 'SWF to Video' tool - iI tried few but no one works as expected - some have pure quality (even if the best quality is set) others won't display or fail to convert ;/
View 5 Replies
Dec 7, 2011
Is there a way to export it as AVI or any file type that support HD and get the same out put in SWF, i tried to export but the final output is very weak
View 3 Replies
Jul 27, 2010
what are the best settings to export .mov file? I have 1280x720 movie and I can export it no problem but sometimes it skips or gets stuck when I play it. I'm not sure if it's my video card or the actual file. I was using the H.264 setting and compressor quality best.
View 1 Replies
Apr 4, 2006
I have a PSD with about 30 layered transparencies. I exported each individual layer as a PNG 24 with the transparent background in tact. I then made identical layers in Flash just like I had in Photoshop, and imported each PNG to it's corresponding layer at which point I converted the graphic to a movie clip for future scripting animations. Once I got to the 24th layer Flash quit recognizing my transparencies and my first Flash layer masked anything else I brought in from layer 24 on....but the layers above remained OK!! I checked and double checked my Photoshop exports and had several Flash "gurus" check my work. Nobody can figure out what is wrong! Is there a limit to the number of PNG tranparencies allowed on seperate layers in a Flash document?
View 7 Replies
Jun 1, 2010
Can you show me an example of a very easy implementation in AS2 (action script 2.0) to bring a var from a php file. I have a php script who return a value into the var $result when it is executed, how can i use this var on flash?
View 1 Replies
Apr 1, 2011
When I try to export my application to native installer with using Export Build Release, it isn't importing my sqlite database files which are in my application directory. Is there a way that I can import those database files ?
View 1 Replies
Mar 15, 2011
I have a problem I can't seem to fix - why wont the transparent attributes of the PNG files I have substituted into the XML gallery wont show? instead there is a heavy white border that overlaps other images in when the flash is rendered
var tn:Number = 0;
var current_tn_x:Number;
var current_tn_y:Number;
[code].....
View 1 Replies
Dec 2, 2009
I have a movieclip (jobImage) which I'm loading an image (Image1, a subnode of Job1) into using XML. But I want to be able to click on any one of a series of buttons which will have that image replaced by a new image (eg. Button2 will load Image2, another subnode of Job1, Button3 will load Image3, etc.).So I have the selected button pass a number back to a variable called "_root.imageTarget". If Button2 was pressed, this would happen: _root. imageTarget = "2";This variable is then combined with the word "Image" to form a new variable (newImage)[code]
View 7 Replies
Feb 8, 2012
I have a movieclip (jobImage) which I'm loading an image (Image1, a subnode of Job1) into using XML. But I want to be able to click on any one of a series of buttons which will have that image replaced by a new image (eg. Button2 will load Image2, another subnode of Job1, Button3 will load Image3, etc.).So I have the selected button pass a number back to a variable called "_root.imageTarget". If Button2 was pressed, this would happen:
_root.imageTarget = "2";
This variable is then combined with the word "Image" to form a new variable (newImage)
newImage = "Image" + _root.imageTarget;
[code]....
View 1 Replies
Feb 12, 2010
Are there any custom libraries available that allow me to code/publish in CS3 using some of the features of CS4?
EDIT: I say "some", because I understand that it is obviously nearly impossible to reimplememnt CS4 in CS3.
View 2 Replies
Feb 27, 2012
I have DataGroup with custom item renderers, which can partly overlap each other. I have possibility to select these items. And I want selected item to be above others in the datagroup. But since DataGroup sets childIndexes (from left to right) to its children and we cannot change childIndex of items explicitly, selected item is above all items to the left and under all items to the right. So, what is the way to place selected item above others? I thought of using PopUpAnchor, but may be other solutions exist.
View 1 Replies
Feb 17, 2011
Overlay blending mode in flash on trasnaprent, imported images, doesn't work properly! It leaves dimmed black background instead of transparency. Same thing is in CS4 and in CS5. What is even more weird is that in Flash preview stage window everything is fine, and it works, but after publishing the SWF, you can see black background.I looked for workaround that...no success. No one answeres to this question.
-I tried with 24png, 8png, gif with different settings. No success.
-Tried also with After Effects, and then export to SWF, it works surprisingly.
View 1 Replies
