Professional :: Export Flash To Video?
Dec 6, 2010
export an animation sequence from flash to a video format. Looks like flash has Quicktime and Avi as options. However they both produce poor and jerky results. My animation is 750 by 545 pixels and running at 20fps - I have tried upping it to 25fps to see if it is a frame rate mismatch issue but similar rsults. For the record the anim plays perfectly as a swf. I have tried a third party swf to flv converter as flv is the format I desire but still jerky irregular playback
How can I get around this?
View 3 Replies
Similar Posts:
Dec 18, 2010
I made a video in After Effect and export it to flash as a FLV video.. and write de code to load it into flash.. but I need it to loop.. Here is the code
[Code]...
View 1 Replies
Aug 16, 2010
I'm trying to make a new site (Green DNA) and wanted to use a combination of flash and html At the top, I wanted to have the navigation bar as flash, and below the html content (like for example a blog).I wanted to create some cool animations using After Effects, and import them into flash. I was planing to use around 250-300 frames of animation total (800x270 pixels) and keep it the whole .SWF file below 2MB
My first attempt was to export the video from AE as a .SWF but the result was a 10 MB file Then, I tried to export as a PNG or jpg animation sequence... I was able to reduced each frame to about 27.0kb but the result was around 6mb file Then, I tried saving the animation as a .mp4 file (around 2mb) but I couldn't figure out how to imported on flash (I was using adobe bridge, but It kept changing my 800x270 pixel video into something that I didn't approved ( I tried multiple settings)
View 2 Replies
Nov 22, 2011
I have made my site and now the protocols of Flash wont allow the internet to playback the video, I dont know if you understand me but this is the message I am getting every time I try to open my finished SWF Project."The following local aplication on your computer is trying to communicate with this Internet-enabled location: my site IP" I looked for the location to allow the settings yet I cant find it.
View 2 Replies
Dec 7, 2011
Is there a way to export it as AVI or any file type that support HD and get the same out put in SWF, i tried to export but the final output is very weak
View 3 Replies
Jul 27, 2010
what are the best settings to export .mov file? I have 1280x720 movie and I can export it no problem but sometimes it skips or gets stuck when I play it. I'm not sure if it's my video card or the actual file. I was using the H.264 setting and compressor quality best.
View 1 Replies
Sep 28, 2010
I have Flash CS3 and I want to export my animation as a movie. However my animation is in a clip and my clip is on the timeline. For some reason it only exports the first frame of the clip.
View 2 Replies
Nov 3, 2009
I have to export my animation to a video file type such as .AVI or .WMV to put in on a DVD. Using the export function in Flash delivers a kind of blurry videofile with too much noise. Is there perhaps another way (or another program) to convert .FLA (or .SWF) to video? Install better codecs, maybe?
View 3 Replies
Oct 15, 2009
I'm exporting some 1280x720 HD vid from a typical vector cartoon made in flash. I've used PNG, Animation, and 8bit Uncompressed and still my vid looks pixelated in the fine details. Exporting a still the same size gives clean results. Any magic setting I'm missing to make this look better?
Adding example of pixelated fine lines in uncompressed video.
View 1 Replies
Nov 2, 2010
I would like export Flash fla to video to be played in video player, how should I do?
View 1 Replies
Nov 24, 2009
I have created an animation using illustrator files in AE CS3 and now want to convert this to flash so it will play on my website.The problem I am having (or rather my web designer) is getting the transparency in flash.
1. How should I export out of AE
2. Do I need to bring the video into Flash and export out of there to get the transparency?
3. Can this workflow even be done?
4. What is the best way for me to deliver the files to my web designer?
I have attached a movie file of the look I am going for. The birds were done in AE and I want them to move across my home page.
Attachments:Hone Bird Anim DEMO.mov (983.4 K)
View 3 Replies
Mar 14, 2012
I am trying to export a flash animation as a mov, so i can convert it for html5. When I export the movie, the animation has artifacts in it, strange things do not erase correctly, they do not show when i view it in Flash, or when I view the exported flv file.
So as you can see, there is a 1/2 drawn image. They round things are floating down, but for some reason, as they float down to stack, they leave behind some partial images.
View 2 Replies
Sep 3, 2010
I created a short animation using a series of photos stop-motion style, only about 18 frames long (as part of a larger project) Whenever i try to export it into SWF (Either CTRL+ENTER or the FILE>EXPORT method) the time it takes is super-fast, but no file is created. When the export was done with a previous successful export, it simply dissapeared
View 4 Replies
Sep 22, 2010
I am unable to export any swiff files from CS5 Flash Pro that contain TLF text. If I apply one text box with TLF text on the stage, with no script on the timeline and nothing in the library, I receive the following compiler error:
MainTimeline, Line 39 1137: Incorrect number of arguments. Expected no more than 1.
MainTimeline, Line 42 1137: Incorrect number of arguments. Expected no more than 7.
I do a lot of heavy actionscript coding, and rarely have anything on the timeline or stage in Flash, but this is a pretty big error for a new feature like the TLF engine. I think there is an issue with files missing, or flash not having the correct path to the classes used by the TLF text, but that is only a guess.
All I can get out of the Adobe documentation is that there is a SWC file that is supposed to be remotely accessed, downloaded, or embedded into the SWF on export.
I have been completely unable to use this feature of Flash since I purchased CS5. Additionally, when I tried to contact Adobe directly by phone, they referred me to these forums.
View 1 Replies
Apr 2, 2011
Im running Flash CS5 with all current updates. My flash is about 2400 frames long, and is running at 24fps. In the beginning, i had no problem exporting it. Now, when i publish/export/test/preview/ beg to work, the dialogue bar will pop up indicating that its exporting... Only to suddenly stop about 70% of the way through and dissapear. . no preview..no swf. and to make matters worse, it devours the swf i exported originally. Im not using any action script (ive been told that could be where the problem is). I have tried copying my frames into a fresh document, just in case the original is corrupt, but still had the same problem. Ive screwed with the publish settings enough to know the problem isnt there. Ive combed through my entire library, looking for corrupt files..still no success. My dilema is almost identical to this user's: [URL]
this flash is to be used as a background projection during a college theater play
View 7 Replies
Apr 29, 2011
Using mac os 10.6.7 and flash pro cs5. Read in adobe flash help that QTpro works better to create .mov file when exporting from flash. I purchased QTpro from apple and installed. It will not open an .swf of .fla. When I try to File>Export>Export Movie it opens and uses QT10 which can with mac. I've looked in System preferences, Flash preferences, and QTpro and QT10 preferences for option to select QT version to use when exporting from from flash. I've tried changing publishing settings to Flash 5, read somewhere QT doesn't support Flash layers after version 5,but didn't help. Am I missing something? My .swf looks good but when I export through the file command, export movie, .mov file is filled with artifacts. On a mac how can I export from Flash and end up an .mov .mpg .wmv or .avi?
View 2 Replies
Jun 26, 2009
i can't export as Quicktime, it just stops at "Recording Flash Content" - Yes i could export as .avi, but for some reason, i lose some effects there, i could export as .swf as well, but Sony Vegas won't read .swf files, and i can't find a FREE (I don't want some trial with annoying Logos) ...
View 17 Replies
Apr 22, 2010
I am writing an article about CS5 and FXG and I really would like know whether Flash CS5 can export to FXG and read FXG files. It can do both or just export?
View 2 Replies
Nov 25, 2010
I have Flash CS5 and I'm trying to export SWC from it to use as a library with Flex SDK (FlashDevelop). I have "Export SWC" checked in publish settings and for a while it worked. Now, even if it still is checked, SWC isn't created (at least in the same directory as SWF). I even tried creating a completely new FLA and copied everything from the old library in there. Still it doesn't work.
View 6 Replies
Mar 25, 2011
have a file which only shows up as a black box (correct size) on the posted html page. The status bar indicates "waiting for the page..." etc., but nothing changes on the page.There is another swf file on the same page and is working perfectly, but the above mentioned file still does nothing.
View 2 Replies
Aug 1, 2011
I was told that you can export Flash CS5 creations into html5 Canvas.
View 1 Replies
Sep 7, 2011
I develop these site in PHP BB BMW Dubai and Porsche Dubai but failed to rotate images in top banner. After lot of dissapointment, i recently converted that baner with 6 small pictures than 2 big pictures (previously). Now im thinking of changing or rotating those 6 pictures in flash. So my question is which flash player is the bestest to export to, i mean level fl5,6,7,8. I dont wanna export at most recent as it might bug users to upgrade their old flash player, when they browse my content.
know if there are known issues anyone knows about PHPbb stuff with flash files. I will be experimenting this for first time. As in Dubai at least i have not seen any one site using flash in PHP BB, as people dont detailing attention to community board.
View 1 Replies
Oct 6, 2008
want to know if it is possible to create a vector basedfile (PDF) from a web based Flash application. The applicationwould be a 'Design it yourself' type deal, it would just be a fancytext generator. All this will be designed by the user using theflash application . What I want to know is once the user has finished designingtheir text, can this 'creation' then be exported as preferably aPDF, or Jpg, etc. once the user submits the design?
View 6 Replies
Jan 26, 2010
I am importing quicktime videos into flash from premiere (cs3) and exporting them --- however, for some odd reason (and this does not happen consistently) small pink boxes show up towards the bottom of the screen for a couple frames and then disappear in the final product (Flash file). I've exported the movie several times and sometimes they do not show up at all; other times, they are present in various places in the movie. Does anyone have any idea what could be causing these bizarre artifacts in the final export?
View 1 Replies
Mar 21, 2010
is there a logic explanation why my flash projects when exported as an avi or quicktime etc etc the objects that were masked are not animated? and what do i have to do in order for project to be as i see it when i test the movie and it appears fine.
View 7 Replies
Jun 2, 2011
I'm trying to export a Flash movie as a .mov file. The animation is not that big but there are strange display issues. As the character moves across the screen, there are bits and pieces left on the screen from the previous movements. It's just not rendering correctly and looks terrible. I can't seem to fix it and have been playing with the Format settings etc. There's always the junk left on the screen.
View 2 Replies
Jul 14, 2011
I have a flash file which is 690 x 420 pixels. When I export it and set it up to play on jwplayer it shows with all of the pieces that are off the art board also. This is a test [URL].
View 7 Replies
Apr 11, 2011
is there a logic explanation why my flash projects when exported as an avi or quicktime etc etc the objects that were masked are not animated?and what do i have to do in order for project to be as i see it when i test the movie and it appears fine
View 1 Replies
Nov 5, 2010
i try to create my logo from flash
i use export function in gif format.
the output color is not same as what i saw at flash.
may i know why? below is the screenshot.
flash
output
View 5 Replies
May 9, 2010
For those of you that use Flash like I do, as a drawing tool, then you may be disappointed to find that Flash CS5 no longer exports your graphics as .ai files. Your only options are .swf, .fxg, .bmp, .jpg, .gif, .png.Often I use Flash and Illustrator together. I'll draw in Flash and export to Illustrator. I mainly use Illustrator when I need text on a curved line. Then I bring that text back in to Flash.
It's odd because one time I just typed in .ai into the filename and it did indeed create an .ai file. However, just now, I tried to do that again and it won't work for me. ALSO... I upgrade from Flash CS3 to CS5 ultimately skipping CS4. The problem is, CS5 only let's you save to legacy CS4. So my CS3 version can't open my CS4 or CS5 files.
View 9 Replies
