I am trying to create a gallery where each thumb is housed inside of it's own movie clip that will have more data, but it keeps failing because it won't let me refer to the newly created instance of the movie clip. Below is what I am trying to do.
var xml:XML;
var xmlReq:URLRequest = new URLRequest("xml.xml");
var xmlLoader:URLLoader = new URLLoader();
[code]....
I am trying to create a gallery where each thumb is housed inside of it's own movie clip that will have more data, but it keeps failing because it won't let me refer to the newly created instance of the movie clip. Below is what I am trying to do.
var xml:XML;
var xmlReq:URLRequest = new URLRequest("xml.xml");
var xmlLoader:URLLoader = new URLLoader();
[Code]....
It dies every time on that last line. How do I refer to that vidThumbn instance so I can add the imageLoader? I don't know what I'm missing. It feels like it should work.
I am completely new to actionscript although I do come from a OOP background. I have been asked to trial Flash and Actionscript 3 in particular - so I do come with a few preconceptions on how I expect actionscript to behave. I have a problem I donot understand. I have created a new class and to test it I use a simple test harness in the form of a .fla file.
The issue I have is when I create a new instance of the class and assign it to a variable, subsequent background changes to that instance of the class are not 'picked-up' when referenced through the variable. I would expect that given instance of class could be assigned to many different variables and any updates using one variable would accessible using any of the other variables.
[code]...
Im dynamically creating an instance of a movieclip, call it a game piece. This game piece has 4 frames, each with a movieclip called base(although one is red, one blue, one green, one yellow). When the game piece is created I set the frame to indicate player color. Im also changing the alpha of base to 1.0 when its being dragged, 0.5 when its dropped.
Using the following code, everything works fine if the game piece color is set to the base in frame 1 (red). If the game piece is created and the timeline moved to a frame other than 1, I throw an error when trying to access base.alpha (this would be the second, third, and fourth instances of base in the game piece timeline). Heres the strange part, this is only a problem when the game piece is first created and added to the display list. Once created, even after the error has been thrown, I can access the alpha of bases 2, 3, and 4 in the drag start/stop listeners. Heres a link to the work in progress, and the relevant sections of code (shortened for brevity, t1 is the top left piece on the pallet, others just repeat the same code):[URL]
[Code]....
I've created an button object in flash. The button contains 2 layers. One is the background image and on top of it is a textField. The textfield is dynamic. I use the button inside a movieclip and I export it in a SWC. The I'm trying to use it in flex.
I'm trying to do this:
var myComponent:MyComponent = new MyComponent();
myComponent.button01.theTextField.text = "Caption";
I get and instance of the button(myComponent.button01 is not null in Flex debugger), but the instance of the textField(myComponent.button01.theTextField) is null and I'm not able to change the text(but the default text appears onscreen). The code is compiled correctly in flex.
I exported the in swc the button control as well. So the button is not the default SimpleButton from Flash, but an derived class generated by flash(with the same name as the symbol defined in flash). It contains theTextField memeber, which is null.
Here is the button timeline(Layer 2 contains the textfield, and the textfield instance is named theTextField):
I have a movie clip that needs to loop inside a movie clip in Flash. Would someone post the code to paste into the ActionScript window? The .flv has no skin on it. I have done this so that I can put the video file outside of the Flash movie.
View 2 RepliesI have several movie clips labeled thumb0, thumb1, thumb2, etc.
How do I refer to these instance names inside a for loop? I want to do something like:
//DISPLAY THE THUMBNAILSfor(var thumbCount:int = 0; thumbCount < loadedThumbs.length; thumbCount++) { ["thumb" + thumbCount].visible = true;
}
mHook -> mBottom -> hItemButton -> itemButton[a] -> itemButtonExp[a]
so i press another butoon, and retrieve a number 2, how do i access itemButton[2].itemButtonExp[2]? Coz i need to change the text field in there?
in AS2 i can access it directly by changing itemButtonExp[a].text, but how do i do it in AS3?
I have done this same thing in ActionScript 3, but am not familiar with ActionScript 2, which I am forced to use for this project. I am loading products into a SWF via XML and attempting to add a click event to each dynamically-created movieclip. Simply tracing the text from a node in XML will do for now. I'd like to assign a property called "desc" or "description" to each movieclip and have it trace that property's value when clicked. Here is the relevant portion of my code as it stands:
ActionScript Code:
var iXML:XML = new XML();
iXML.ignoreWhite = true;
[Code].....
I have a label I am referencing form a movie clip inside the movie clip which contains the "label_2." Here is the code I used: MovieClip(parent.parent).gotoAndPlay("return_2"); Now I need to reference a instance name of a movie clip in side the same scene.
View 10 RepliesI placed a movie clip instance inside a button, and I want this movie clip to play when the button is released. I'm using this code on the frame containing the button:
function playMovie(event:MouseEvent)
{
this.theButton.theMC.gotoAndPlay(3);
[code].....
on my timeline i create a new instance of the class FirstClass with the following
code:
var firstObject:FirstClass = new FirstClass();
the class looks like this:
package {
public class FirstClass extends MovieClip {
public function FirstClass() {
[Code]....
On my timeline i would like to acces the x position of the object tempObject
I created a MC with a simple createMovieClip, in which I load a movie. This works.
[AS]
_root.createEmptyMovieClip("pmpPlay", 2);
loadmovie("play.jpg", pmpPlay);
[code].....
I'm creating buttons like so:
for (k=0; k<5; k++) {
myLink = new LinkClass();
myLink.name = "link" + k;
box.boxMC.linksMC.addChild(myLink);
}
This creates 4 movieClips with the names "link0", "link1", etc. How do I remove them? I try this:
box.boxMC.linksMC.removeChild(myLink);
But it just removes the last one made (link3). How do I have all of them removed?
I have a script that randomly pops out circles all over the stage. However, I want them to disappear once I roll my mouse over them (and only the ones I roll over, not all the instances).So if I have code like this in a function:[code]And then I have a mouse_over function in the same class, how do I tell it to removeChild? Since the stars are instances of the object, they are giving instance names like instance67, which makes them hard to remove.
View 2 RepliesI have a MXML button:
<mx:Button id="myButton1"/>
How do I create N number of Buttons with Actionscript: myButton2, myButton3, myButton4... myButtonN ?
And how to get the reference to the newly created buttons right after they are created? Like I should be able to do myButtonN.x = 100 right after it's created.
much like the title says. how do i put code in the main timelinesuch as gotoAndPlay(x)x refering to a a frame inside a MC inside a MC.
View 5 RepliesHow flash setup a variable to handle the newly created movieclip?
Example:
this.createEmptyMovieClip("mymovie",2);
this.clientscroller.setScrollContent(mymovie);
Where did I set it up as a variable? I tried this and didn't work either:
this.createEmptyMovieClip("mymovie",0);
mymovie.createTextField("mytext",1,100,100,300,100 );
In the code I'm writing, I use a with block to reference a newly created object thus:
[Code]...
I tried doing this.xot, xot, and other stuff, but it just keeps sliding under _root.xot instead of ArrowL##.xot.
I've started getting to grips with using the BitmapData class and a Transformation Matrix in the hope that I can start making some interesting image effects. However, at the moment Im having trouble figuring out how to shift the newly created bitmap so that any scale transformations are applied from the center rather than the top left corner. See here for example: [URL] The flower on the left is the original, the flower on the right is the new image created using "bitmapData.draw()". It has been scaled up to twice the size, but I want this to happen from the center of the image.
[Code]...
[code]...
now when you first look at this code.. it looks perfectly fine right? .. well if you use this exact code and place a clip on the stage with an instance name of 'mc' .. publish and rollover 'mc'... the trace statement does not show.. is there something I never read about with respect of creating functions inside if statements??
I would think you could use the function name(){ syntax.. and not be forced to using variableName = function(){ syntax in creating functions inside if statements..
I'm trying to make a matching pairs game. First of all I'm making all the tiles, using a loop inside a loop. How do I get the ID of an item inside that loop? My code looks like follow:
Code:
var matches:Array=new Array(1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8);
makeTiles();
function makeTiles() {
[Code].....
I'm trying to create a movieclip and load a "frame" image inside of it, then create another movieclip inside of the first, and then load another picture inside of the second. Something like this:
var thumbFrame;
var thumbPicture;
thumbFrame = container_mc.createEmptyMovieClip(thumbFrameName, 1);[code]..........
But it doesn't seem to work the way I want: the "thumbPicture" doesn't appear on top of the "thumbFrame" as I expected... only the "thumbFrame" shows (with it's image succesfully loaded). Am I missing something?
EDIT: If I comment this: //thumbFrame.loadMovie("thumbFrame.png");
The thumbPicture.jpg shows inside of the first movieclip, so maybe the issue is with the .loadMovie?
I create a super simple .fla using flash MX 2004 professional. I put this code under the button I created.
on (release) {
var mc = _root.createEmptyMovieClip("trianglemajor", 1);
mc.createEmptyMovieClip( "triangle", 5000);
with (mc.triangle) {
lineStyle (5, 0xff00ff, 100);
[Code] .....
I just see a blank screen when I click on the button. My objective is to show the movieclip mc inside my created scroll pane?
I'm having trouble to center any dynamic content (movieclips, textfields...) inside a dynamically created movieclip, which has a default point of interested in the top left corner.
PS: Just as an example, I have a dynamically created text field inside a dynamically created movieclip....and when I try to scale that movieclip I need to scale it from its center
Does anyone know how to assign an external class to a newly added child to the stage.
What I'm doing is using a button to pull in a Movie Clip from the library.[code]...
I'd like to be able to instance an MC that is within another MC to the stage. I understand how to duplicate things in the same path and how to attach from the library. However, for the unique situation that I have in my project I'd like to instance from inside a MC to the root.Pseudo example:contatiner1 and projectile1 are MCscontainer1 parent is the rootprojectile1 is inside container1Create an instance on the root of projectile1
View 2 RepliesI'm making a basic photo slide show for a website I'm working on. I have the following in place and working:
- One movieclip (images_mc) preloads all of the images before the main slideshow movieclip (player_mc) begins
- player_mc contains photo_mc which is the container for the image that is currently playing...it is animated on the stage and everything is setup that I can insert the first image and play it, then insert the second image and play it again
- I have an array full of pointers to the images_mc instances of the photos (mc_array)
- I'm having problems inserting the content from images_mc into photo_mc...I've done the following:
ActionScript Code:
photo_mc.createEmptyMovieClip("placeholder_mc", photo_mc.getNextHighestDepth());
trace(photo_mc.placeholder_mc);
photo_mc.placeholder_mc = mc_array[photoCounter];
[Code]....
The assignment on line 4 is causing the placeholder_mc to be completely rewritten, instead of duplicating the content from images_mc and inserting it into placeholder_mc. How do I duplicate the content into the placeholder? I've tried duplicateMovieClip() several times, but it always returned UNDEFINED, so maybe I'm not doing it right?
How do I insert the preloaded images properly?
how do you access a button inside a movie clip by instance name? i want to add an event listener to the button.
i tried:
Code:
myMovieClip.myButton.addEventListener(MouseEvent.MOUSE_DOWN etc......
and got no errors but at the same time it didnt respond to my event listener
i'm trying to use compiled assets and code from a swc. Inside a new fla I select the swc to be included when exporting. When create the instance in the timeline of the code works and I can see assets that are inside the swc and trace a propertie from the same object. The problem is only when doing the same inside a movieclip, can't reach the assets (movieclip) but I can still trace properties from the class. I've uploaded the working files: master.fla is the one that creates the swc. template.fla is where I test the swc. files (This are cs4 .fla + .swc + .as)
[Code]....