How can I do this in AS2?I have been trying to use the delegate class to set up an onEnterFrame event that I can then remove. I have this working with events for button clicks etc but not onEnterFrame. Well, i can get it working, but how do I set it up so I can remove a specific onEnterFrame, as I need to use multiple onEnterFrame throughout the script?
What is the difference between Event.REMOVED and Event.REMOVED_FROM_STAGE? I thought when you have: removeChild(mySpriteInstance); that this removes the item from the stage...is there a different kind of removed?? For example, if I am trying to "clean up" after an item is removed for the garbage collector...should I be listening for:
I have created a flash file with animations, buttons and videos which will be uploaded to Zmags - (Digital publishing platform for flat pdfs) Everything is correctly set up on my flash file, and the .swf files work fine independently. Once uploaded to Zmags, when turning to a new page within the interactive pdf, the animations plays a small clip before the page is fully loaded. Once the page is fully loaded, the animations and buttons etc work as they should. I do not want this short clip of animation to run when the page loads.
Now I have been told that the solution will lie with: Event.ADDED_TO_STAGE and Event.REMOVED_FROM_STAGE.
I am informed that these event listeners will ensure the page is fully loaded before the animation plays.how to add these into my ActionScript,.I have the actions on the first frame of the timeline and have used frames to create a contents page, so when your mouse hovers over the pages numbers (buttons), different animations happen (which are contained in the frames) I have no clue what to do next to add Event.ADDED_TO_STAGE and Event.REMOVED_FROM_STAGE.
ActionScript Code: one_btn.addEventListener(MouseEvent.MOUSE_OVER, onebutton); function onebutton(event:MouseEvent):void {[code]...............
I just started a course that does a little flash. To teach us they have us build a brick breaker game. I have come to a part were I have to remove all the Listener that were created for the game. Each level is a movie clip and when the level is over the level instance is removed from the child. From what I understand when the level is removed the Event.REMOVED_FROM_STAGE becomes true and the function attached should be called however it is not. Here is the code of the function that sets the listener and the function to be called:
[URL] I needed to do clean up before the MC is gone ... so after some digging I found this event:
Event.REMOVED_FROM_STAGE
So I am trying to ask for some conformation here: Is this the ONLY situation that my MC will be deleted automatically by Flash? If so then I can just listen to this even and call my cleanup function when it happens...
I have a .swf file being loaded with a very large amount of internal objects/childs/loaded-contents.
Been preparing a general cleanup method removing listeners, timers, tweens, children, sound, netstreams and so on. When i run the cleanup function with a simple internal button, all is performed perfectly.
But as soon as I load the .swf and unload it in a container .fla, then the REMOVED_FROM_STAGE which calls stopall() function doing the cleanup (in 2 steps), I get error
I have editable grids which are 2-way binded to my model. What I want is to validate my data when user edits any cell before it get updated in model. I have applied my validation at ItemEditEnd handler, but, I want to apply validation in between itemEditBegin and itemEditEnd events.
I hava a custom component and it contains a child icon. If I add a mouse-click event listener to both component(click-listener1) and icon(click-listener2), the event dispatched sequence is click-listener2, then click-listener1. I can understand it. But if I add a custom event to component (listener1), and mouse-click event to icon(listener2), when icon is clicked, the component will dispatch the custom event. In my test, the event dispatched sequence is listener1, then listener2. It doesn't match with event-bubbles rule.
In my opinion The custom event is dispatched in listener2, which triggers listener1. Why event flow sequence is not listener2, listener1?
In component.
icon.addEventListener(MouseEvent.CLICK, iconClickHandler); private function iconClickHandler(event:MouseEvent):void {
I am trying to learn JavaScript and I am wondering whether JavaScript has a event listener just like ActionScript's ENTER_FRAME. Basically, I want this event listener to listen "all the time" not just wait for any particular instance (mouse click, keyboard event) of event.
I am having trouble using a custom event in flex. I need to dispatch an event from inside two nested components and receive it in the main application file. The basic set up is a main application file importing a custom "gallery" component.
If I have a Global Variable Globalvars.vars.noLoaded which is in many classes How do I create an event where i detect to see if it reaches a certain number.
The app I want to build is an interactive map for a site I'm designing. In a nut shell, students looking to enter an exchange program should be able to use the map-image (as in, an actual 'map of the world') to preview possible destinations (I've attached an image of the two basic states to clarify).
After an introductory animation, I want a mouse-over to trigger a function that populates the map-image with a series of buttons. I need the buttons to be distributed according to information in an XML file (ie. x/y coords, some information text, and an animation to load upon being clicked). I want each button to call a mouse-over function that loads info data from an XML field and place it in a dynamic text field at the top. Then, I want each button, when clicked, to call a function that animates replacing the map-image with an image of the corresponding travel destination. Finally, I want a button on each image that will clear that image from the stage and call the function that populates the map so the process can start again.
I'm working out of a couple of books on AS3, but I'm a little hazy on how I ought to be constructing this thing. So here's the first place I've run aground: After the intro animation, I want the user to mouse-over the stage and have a second animation play (clearing away the introductory text), and I want the conclusion of the clearing animation to immediately call the map-populate function; but I don't want a mouse-over to have any effect until the introductory animation is finished. Is there an event dispatched automatically at the end of an animation? What is the event listener class?
I'm not sure if I should be storing each of these animations in an independent .fla file or if I should create them on all one timeline and have the program redirect to specific frames.
I know the difference between the two, but I never felt the need to use the bubbling feature. If I want to listen to an event from a deeply nested children, I always use the capture phase. Could someone explain to me why I should rather use bubbling, its advantages, and maybe show me a situation in which bubbling would be the only solution?
i have a question to ask about asynchronous key controls This was what i did
[Code]...
and i checked with [URL]...?newspage=6249 and it looked more or less the same, so why is it that when i move my character and when i hold down a key, it just keeps on listerning to that keypress event listener, instead of just executing the other event. So say, i tap left and after which i tap right, it will work just fine, but if i hold left and tap right, the event listerner will still be listening to the left key. So, i was wondering could anyone point me in a direction as to how should i make my code stop listening to an event as soon as another event has been dispatched?
if I have an event listerner (mouse, keyboard, enterframe,....event) that is being triggered, and when it finishes its event, something that is able to detect the finished event listener and fire out another sets of event.
It works more like MOTION_FINISH in TweenEvent, but it is only available for TweenEvent only, what if I want to detect a mousclick, keyboard, enterframe or even touch event?
In all the ActionScript examples I come across, people write custom events with the types defined inside the custom event's class definition. But, in my experience, it makes more sense for the object dispatching an event to own its own definition of that event (which, in ActionScript 3, is a String).
[EDIT: After writing this question, I've found there to be cases for both positions -- in some situations, event types should be stored on the event object, and, in others, they should be stored on the object dispatching the event.]
In my AIR application, I try to dispatch a custom event from a class to main window.This class is use to call httpservice. My goal is to send a custom window when the httpservice result is send.[code]...
I would like to extends the Event class to add some events I am using in game. But I don't want the new Event Class to have the old public static types. For instance I don't want to have:
NewEventClass.ENTER_FRAME
How do you go about extending the Event class without getting the old types mixed in?
Is there any way to outsmart AS3 to leave out the uneeded types?
Or should I avoid creating a new Event type altogether and just add the new strings?
My stage has about 25 buttons on it. Each button when pressed to tweens the background to some random x/y coordinates and then loads an external swf file.This is all working, but the timing is off. How can I wait for the initial background tween to end before I make the loader call to the .swf file.Currently each button's behavior is called on the MouseEvent.CLICK event which calls a function that knows its unique filename.swf. I know you can add the MOTION_FINISH even to the tween event but then I would have to call a new function and lose track of the button that initially called it.
I'm moving on to my next massive programming project and I'm trying to decide whether I should code it in as 2.0 or 3.0. I came across the new click event model in 3.0. Right now it's looking like a pain in the butt to me. So now I have to make a function and add it as an event listener? what the hell? What's the benefit? I understand stuff like this makes AS a more complete language but it's kinda annoying.
I was having a go at a tutorial which worked fine but then I started seeing how it would work in an external file. Object Oriented Flash. On line 27 it picks up the following error... 1046: Type was not found or was not a compile-time constant: Event. //function enterFrames(e:Event) I've tried this for myself but what are the function parameters I need to mimic the same motion of the bouncing ball?
I'm newish to OOP AS... trying to build a image loader that wipes between loads. having trouble getting my onloadComplete event to call a method in the main body of the class. what am I missing?
The problem is I get Error: Error #2094: Event dispatch recursion overflow. Why does removechild keep getting called if this.parent does not exist? Why doesn't removing event listeners work?
I'm programming a little tank game (Check the attachment). The main class for tank is game.serovkonstantin.tanks.Tank.as and there are also 2 subclasses for now: Abrams and T90 which extend Tank. In my game.serovkonstantin folder I have a custom event (TankEvent), and the only event type inside of it which is TANK_INACTIVE.
I've added an event listener for MouseEvent.CLICK to each of the tank instances (inside Tank.as) which works just fine. When I add any of the tank instance onto the stage and click it, it traces the tank's name just like I wanted whether it's Abrams or T-90 depending on what tank I clicked. But the problem is that when I click a tank I also want it to dispatch my TankEvent.TANK_INACTIVE. The main stage has a listener for this event, so I expected it to catch the event and trace some phrase, but nothing happens I don't know whether it doesn't dispatch my event or doesn't catch it.
======== if you're interested why I need to dispatch this event, well,I suppose it will help my game know what tank to move when I click somewhere on the stage, and what tank(s) should be inactive,event it they all of the same type. I mean if I click one of the tanks it accepts all the controls while the other should be inactive
This is a very basic question but I can't seem to find an answer. I have a mouse over event and have created the buttons with the mouse overs which is working great. I created the actionscript to go to a specific web page when a user clicks the button. Now, I need to add a label to the mouse over so when someone mouse's over any area of the button, it will show them a particular name for the button.
I am sure that this can be done using actionscript in a mouse event roll over command but I can't figure out what I need to show the text. Here is where I am:
how can i access event.target outside event listener method.say for example
my_mc.addEventListener(MouseEvent.CLICK, onC); function onC(e:MouseEvent):void { var m:MovieClip = e.target as MovieClip; } trace(m.totalframes);/// not working
now what if i want to get totalframe property of m instance, in short for every movieClip clicked.
I am doing this inside a module containing viewstacks and their childs.Calling onInit() on creationComplete of module.When I am inside one of the childs of a viewstack of this module and press Enter, it doesnt not invoke the listener function at all (bp inside this does not get hit).
private function onInit():void{ this.addEventListener(KeyboardEvent.KEY_DOWN, keyPressed); }[code]..........
what should i do to get chart's data on the click of respective data Legend. suppose i have array [{id:123, label:sales, year:2010},{id:124, label:refunds, year:2010}]for a column chart which has year in x-axis and sales iny-axis.two legend showing labels sales and refund.What i want is to get the whole data (id:123, label:sales, year:2010) on clicking of the legend 'sales'.What should i do? I tried listening mouse click event and itemClick event.
