I am trying to debug a .as script but I do not have the ability to use trace because I am using mdm zinc. Is there another way I can see the state of variables in the .as?
View 2 RepliesI have some drag and drop MCs. The variable ranNumDrag1 return a, b or c. The input variable that I need should be mainDropa, mainDropb or mainDropc. When I trace the newDrop, it prints correct for exemple mainDropa but inside the if-state it does not working. I have tried writing _root.newDrop and _parent.newDrop with no result. If I hard code the if-state with for example mainDropa then it is working? How can I catch the trace result as variable? My script is:
[Code]...
Any best way to script several MCs (acting as buttons) so that on release(), the alphas on the others tween to 20. When you go to click one of the dimmed button, its alpha should tween back to 100 and the previous one that had the full alpha should now fade to 20. Logically, I know I need to somehow implement a variable to check the state of the MC and an if statement to script the actual alpha tweens but I'm confused as how to actually implement it. Where to put it etc.
View 14 RepliesI have a flash map that contains 51 movieClips, one for each state.Sample instanceName for a state (Alabama) would be: S_01
I have a XML record that contains specific info for each state.<stateID>01</stateID
I am trying to link the stateID's in the XML record to the state movieClips that make up the map.var stateInstanceName = 'S_' + stateID;
I was just trying to do a simple trace command to see if I could pull the _width of each state clip to see if I was linked up:
trace(mapInstance.stateInstanceName._width)
It's my understanding that view states can be useful when switching the layout of design elements. Such as, a loading page as one state and the main application design in another state. Is this the correct use of them? Additionally, I have a label in State1 and I cannot figure out how to access that label via actionscript. labelID.text = "New Text"; is not working.
View 2 RepliesI need to add a rollover effect to the disabled state of a Spark button. This way, users can rollover the button and know why the button is disabled.I think I would have to override ButtonBase's getCurrentSkinState. Is there anyway to test if a mouse cursor is over a disabled button?
View 1 RepliesI'm using Flex 4.5 and trying to take advantage of the new state groups feature. I have two States (call them readType1 and readType2) that both belong to the same stateGroup (call it readOnly). There are several places where I'd like to do something based on the current state, and it would be the same thing for the two read states. [code]...
View 1 RepliesIn my air project i used current state size is width="441" height="358" . i have link button like Singin then move to singin state (currentstate='singin')
<mx:State name="signin">
<mx:SetProperty name="height" value="616"/>
<mx:SetProperty name="width" value="919"/>
So application resize into 616,919 . After that function finished move to current state like(currentstate='') But size not be changed . How can i set the size for current state?
I want to fade all the elements of the next state when transitioning from any state.I tried different things but I can't get it to work. And I don't want to manually add transitions for every state.
Something like:
<s:Transition fromState="*" toState="*">
<s:Fade target="*" duration="500" />
</s:Transition>
In my view I have a welcome screen:
[Code]...
Which is a pretty small component and I have panelContainer:
[Code]...
Whilst the user is reading the warm and fuzzy welcome note in the welcome state I want to be creating the big expensive panels state so taht when we switch there is no delay. Before the panels state is set panelView is null but I presume there must be an IDefferredInstance floating around somewhere that I can use to kick off the creation of the view. How can I get hold of it?
I am trying to get converted to Actionscript 3 from AS2.In old versions of flash, you simply placed the sound in a keyframe inside the button on the over or down state. Worked fine, but not anymore.I guess the sound must be set up with actionscript and a listener.I understand linkage. how to make one sound on the over state and a different one on the down state?
View 4 Repliesi curious how to access state in flex "Current State" from flash movie clip??..so far i make movie clip in flash and it has button inside with name " button" and i put this flash file into flex in "state 1" flex application..i want to make event handler for "button" that trigger changing state from "state 1" to "state 2" in flex application..and in flex application i do not write anything because i have no idea how to deal with this stuff..
View 1 RepliesI have an empty SWF that's sole purpose is to call loadMovieNum and start the project. Each loaded movie has a few variables defined within them - unique to those loaded SWFs. Instead of declaring all the variables in each SWF can I declare all of them in one place, in the first frame of the empty loader it all starts from? I'm thinking I can then declare a variable which each loaded movie can increment as needed for me.
View 2 RepliesHow do variables true/false custom variables work in flash?
For example, what I want to do is create a simple true=false variable that I can call on an if statement later.
For example:
Code:
Var1 = true;
if (!Var1)
{
[Code]....
I noticed that neither the "Var1 = true;" part or the if(!Var1) part worked in flash.
How can I make a bunch of variables from a for loop. for example for (var i=0; i<total; i++) {var bunch(i);}. that i make a bunch of variables named bunch1, bunch2, bunch3. I keep getting errors. I program and use so many different languages that I dont know if that can be done with AS3. my only other alternative i can think of is to create some sort of event dispatcher object array. but I dont know how to get them all to send events to one listener with there index number.
View 5 RepliesI have a list of strings that I add to an array, then attempt to set those values in a for-loop using data that I read in. The array gets updated, but the values the array contains do not. I also have an array of buttons that I update this same way that works great, but strings don't seem to work the same way. I have tried moving the string array to give it full scope, and still nothing...
public class test extends Sprite
{
// Declare a list of strings
protected var title0:String = undefined;
[Code]....
I'm writing code that takes data from mysql that's processed by a PHP script. It's actually a bit bizarre, at least to me. Anyway, here's some basic AS3 code that's moving toward what I want to do:
var loader:URLLoader = new URLLoader();
var urlRequest:URLRequest=new URLRequest("receive.php");
urlRequest.method=URLRequestMethod.GET;[code]....
For some reason, the statement "trace(evt.target.data);" produces a whole pile of garbled text before the actual stuff that it's supposed to show Because of problem #1, I've had to include a throwaway variable at the beginning, otherwise the first variable I try to pass into AS3 comes back as undefined. This causes errors when I run my flash movie in the IDE, but when I run it from the browser it doesn't seem to have any effect.But this is the strangest thing of all whenever I make any changes to the database (and subsequently try to load data from different variables), the new variables come back as undefined. For example, let's say that I add another entry to the database, and decide to load students 2, 3, and 4 instead of 1, 2, and 3. When I do that, any new data I've added comes back as undefined, even though when I view the PHP output in my browser, it looks just fine.
And now for the REALLY bizarre part: I'll copy that output, paste it into my PHP script as an echo statement, comment everything else out, and my flash movie runs fine. Even though the output from the PHP script is exactly the same, it gives me errors.
There is a bird, and you control its upwards movement with a key. It has thrust, gravity, it works fine. The problem is I have a bunch of icicles that come at the bird that he is supposed to avoid. I tried this first with math random to use as an x coordinate and than move across the screen, but the icicles had the same x-coordinates sometimes. I tried does not equal(!=) but that doesn't work. I made an array and each number that came out of the array I assigned a different variable. This works fine. I put this variable into the x-coordinate such as mc.x=((n)*60)+480. I did this for five different icicles. All their differnt variables have a different value, and I put them into the same function for each individual video clip, but they still don't go to the right coordinate. Here is the test code just for the initial coordinate of each icicle before it moves...////////////////////////////Quote:
var temp:Array = new Array()
for (var i:int=0;i<8;i++) {
temp.push(i);
[code]......
i am trying to do a loop to create several variables to aasign each one of those variables one number.when i write
[Code]...
I have 2 loadVars - myVars, myPictures
basically i have defined their onLoad functions
so in myVars, i call for
Code:
myPictures.load("http://www.fakedevil.com/lurgee/pictures2.php?id="+this._parent.link2.text+"&time=" add getTimer(), "");
pictures2.php is working cos I just check so by rite the variables loaded should change.. but somehow each time I check those variables in myPictures.onLoad, the variables are always the same.
I am trying to load variables from a text file, and have them available from then onwards in the movie, globally so to speak.
While I can read the variable values in a loader function which executes when the text file is loaded, I don't seem to be able to keep those variables available afterwards.
I'm trying to figure out which is more efficient in terms of memory and speed. What I'm doing is having a series of messages loaded to the screen. Is it just faster to write them in string variable or in an XML document which is more versatile in terms of editing and adding on to the document.
View 1 Repliesiam trying to append 3 variables to a url that already has 2 variables appended .. iam using the LoadVars -> "send" method but it wont work. it works if i use a url like "form.aspx" but it wont work if i use "form.aspx?var=nun" which is what i need so i can append 3 more variables to that URL.
View 1 RepliesI have a sub menu with two movie clip buttons, let's call them mc1 and mc2. They both have a MOUSE_OVER event and a MOUSE_OUT event. What I would like is that when mc1 is clicked it will stay in the over state and then if mc2 is clicked mc1 will go back to the out state while mc2 stays in the over state.What seems to be happening in my code is that the MOUSE_OUT event is overriding the MOUSE_DOWN event. So when I take the mouse off after I've clicked mc1 the over state goes away.
Here's my code thus far:
import flash.events.MouseEvent;
import flash.display.*
addEventListener(MouseEvent.MOUSE_OVER, mc1_over);
[code]....
is it possible to set the state of keys rather than just read them in AS3? I am particularly interested in setting the state of the CAPS LOCK, NUMBER LOCK and SCROLL LOCK if possible i.e. toggling the LED state.
View 2 Replieshow to make a button stay in its down state when it's clicked, and then go back to its up state when another button is clicked? I'm using buttons, not movie clips.
View 4 RepliesI have a rectangular shaped button. When someone rolls over it, I want a text bubble to appear to the side of that button. The problem is, the mouse thinks it's over the button even if it's over the side bubble which does not exist in the "Up" state. How can I get the cursor to only detect a button ONLY if it's over any part of the "Up" state and not the "Over" state (which because of the side bubble is larger than the original "Up" state.)
Here is a screenshot of the two button states.[URL]... Even if the cursor rolls over the "Over" bubble (and not the Up state), the Over state still shows up.
only issue i'm having is that if i drop the item in the zone requiring a change, and pick the item back up, it combines the shapes. I'm thinking I need to have the if statement more universal. I've uploaded my fla to rapid,I'll put my coding below as well.
backbutton.addEventListener(MouseEvent.CLICK, backclick);
helpbutton.addEventListener(MouseEvent.CLICK, helpclick);
answerbutton.addEventListener(MouseEvent.CLICK, answerclick);
[code].....
I've had a good rummage around the interweb and can't seem to find any examples of a tri-state checkbox. It doesn't look to be supported in the SDK and I can't find any examples online. I would imagine this is a common problem, before I embark on writing my own does anyone know of a good flex tri-state checkbox component somewhere I can use :)
View 2 RepliesI have a button with a click event of "currentState='someState'". Is there a way to tell component to do some function like for example "Function()" when the state changes to "someState"? So execute a function when the state is changed.
View 1 Replies