I've created a rollover button that makes a little pink tab pop up on rollover and drop down using rollout.The animation looks pretty sweet because it's done with the tween class. Heres the code:
on (rollOver) {
import mx.transitions.easing.*;
import mx.transitions.Tween;
[code].....
Problem is, if you rollover and roll off quickly it gets stuck.
how do I do this when the button is already animating using a tween class.
I want the button to be pulsating, then when you rollover it, it expands and stays until you roll off. However, when you rollover here, it keeps pulsating.
Here's what my script looks like:
//tween the button
var button_scaleX:Tween = new Tween(audioButton, "_xscale", Regular.easeOut, 100, scaleUp, 1, true);
[Code]....
Hoping someone can point me in the right direction with this. Instead of creating a button and nesting movie clips for each state, I'm trying to script an animated button of a square (no fill) where on rollover the stroke color changes from one color to another (tweening the tint). I want to do this to the button symbol so it's the same for all instances. Is this possible or do I have to go the button > nested MC route? Sorry if this is lame...it's been awhile since I've used Flash and I've forgotten quite a bit.
View 7 RepliesI have an issue with an animated rollover/out state that I have created. I have seven movieclips that I am using as buttons and when rolled over/out play a different frame of the MC and move all the other mc's with an actionscript tween. The code works as it should but when I try to rollover/out of the mc to quickly the whole thing goes haywire and all the clips get out of place. I have tried to disable the buttons as soon as the user rollover on the mc but it doesn't seem to have any effect. I am only posting the code for one of the mc (publicist_btn) since all the code for the rest are the same.
[Code]...
I'm currently working on a flashsite and are trying to figure out rollover menu buttons. The site has 6 menu buttons and are placed next to each other. I want to put a rollover action on the buttons, that when you rollover a button that the whole button image enlarges and moves in front of the other.
View 1 Repliesi'm an AS2 novice but I wanted to write a class that when you rollover a button it would grow and the others would shrink! At this point it's only missing the other buttons to shrink cause I have no Idea on how to refer them in the code!
[Code]...
I'm making a dynamic gallery that loads images from an xml file, first load the thumbs of each collection and click on the thumb will display the corresponding collection. I want to make that the thumbs are a little animation in the rollover, I have tried several ways and can't do it, referenceThe code has many comments that are evidence I've been doing.
ActionScript Code:
System.useCodepage = true;
_global.datos = new XML();
[code]....
i have been searching this issue over months but i couldnt find anything.And just put simple codes to work this event.(xpos and ypos)it is working,just download and see...and lets improve it...
View 2 RepliesGot a problem with links in flash - I've been making several flash websites that need to be linked together.
I've created animated buttons with rollOver and rollOut effects and used this code
[Code]...
i'm making an animated rollover, and i get an output error that says this: Target not found: Target="_root.icon01" Base="_level0" i have no idea what the base="_level0" means.
View 1 RepliesI've got the following movie online to look at:(disregard background, temporary image)URL...I have 3 icons (will be 4, the photos at the bottom of the movie).When hovering over a button, it should rise up around 50px, and on mouse out, it should drop back down to its original position.If you look at the movie, it does that, however, if you move around the images a bit you'll see that at some points it picks up 2 photos/buttons at a time (since they're overlapping a bit I imagine), but the BIG problem is that sometimes, when picking up both images, they do not return to their original position when mousing OUT as they should, they remain suspended as if they are stuck at the end of the onmouseover function and can't come back down.[code]
View 2 RepliesAll I've been trying to do is to move a string of thumbnails - thumbHolder_mc - incrementally (like every 386 pixels) left and right, controling it with arrow buttons. Code below works like a charm EXCEPT when I try to stop the tween motion on either end. I tried everything - _visible = false, enabled = false, delete function, etc etc, nothing works. In the my script below, buttons get disabled, but never recover. Function never comes "back to life", which is what I thought it was supposed to do: stop(); //connect right and left arrow buttons to
[Code]...
The first on is using the Tweener class and everytime that I press a button it fades out the loaded content of the previous selection, waits for it to finish and then loads the content of the button pressed. Everything works fine with this part.The second code is the on that is using an Array to dynamicaly rollover, rollout and keep selected the buttons.It was also changing the content of the mc that everything is loaded on but without this fancy fade in - fade out...!So i think its time for some code now...:
Code: Select allimport mx.transitions.*;
import mx.transitions.easing.Strong;
var FADEINSTART:Number = 2;
var FADEINSTOP:Number = 7;
[code]....
Ive managed to make the previous mc to fade out but cant really make everything work properly...!
// This is an array, a list of the buttons used. var myButtons = [this.myButton_1, this.myButton_2, this.myButton_3, this.myButton_4]; // Loops on all buttons from the first to the last one for (var i=0; i<myButtons.length; i++) { // When the mouse rolls over this menu option... reduce size just a bit. // NOTICE: I'm not taking into consideration the problem of having the hit area going down and "moving" the // mouse area and out of the button (possible rollover flicking). This is just a simple example afterall.
[Code]...
In the above instance how would I address the problem of flickering? I think want to apply the .onRollOver to an invisible button instead. How can this be done? Im just getting started with tweening animations outside the timeline with MCTween
I want to rollover a button and have it trigger the rollover state of another button. The buttons overlap. The one on top is transparent and smaller than the bottom button. So far I think I have the AS3 to handle the rollover of the top button, but I don't know how to trigger the other button's rollover state.
[Code]....
I have already created an animattion of a bird flapping its wings. I want to include this within another animation of it flying around as well as flapping wings and wondering how this can be done. I tried to import it as both a gif image and swf movie and although it holds the original animation I cannot add the motion tween to draw the flying path.
View 3 RepliesThe first on is using the Tweener class and everytime that I press a button it fades out the loaded content of the previous selection, waits for it to finish and then loads the content of the button pressed. Everything works fine with this part. The second code is the on that is using an Array to dynamicaly rollover, rollout and keep selected the buttons.It was also changing the content of the mc that everything is loaded on but without this fancy fade in - fade out...!!
[Code]...
i am creating a simple set of a few rectangles stacked on top of eachother (going to be like a stack of postcards) and i want to have the user click on the top rectangle and it moves to reveal the one underneath it. i have it all set up to work except i can't think of a way to stop it from being clickable after it's been moved to the side and the 2nd rectangle is revealed. does this make any sense? here is my code:
[Code]...
I'm using actionscript 1.0 and 2.0 on flash Pro 8 and keep getting an error when I test the movie. Here is the error:
[Code]...
I've tried to create this rollover navigation...starting over 6 times already. Is there different language / coding for 1.0 and 2.0? I don't understand what I'm doing wrong.
I have a site that is fairly complex, but was using a massive amount of CPU power, even when sitting idle on a page with no animations. I went through everything with a fine toothed comb, and couldn't find the culprit.So I just started removing layers one by one, until I found the one causing the problem.
Turns out it was a layer with an animated mask. I have a large black recatangle, that I converted to a mask, and then used a shape tween on it. Once that was triggered. The CPU usage went up 65-75%. Even when the movie was stopped on a frame that that mask didn't exist on. Once it was triggered, the rest of the time you are on the site the CPU usage is through the roof. I can do to fix that. Is there some other way I should build an animated mask?
The animation/rollover works well but it still abruptly stops when I rollover another button. The link below is an example on what I want to accomplish.
View 1 RepliesNow I am using the Tween Class to move some boxes in my movie, now I can move the first mc and then another mc after the first tween has finished with onMotionFinished but I was hoping someone could help with how do I start the second tween when the first mc has passed a certain _x coordinate. ie starting the second mc moving while the first tween is still moving.
View 1 RepliesIf i have a clip with a bunch of stuff inside it (on layers) like other clips, bitmaps, etc. and perform a tween on that clip (via tween class), the stuff inside the clip seems to alpha at different rates.
For instance, i have a clip with an empty movieclip which loads a bitmap image and on top of the bitmap image, i have a gradient feathered edge (.png) bitmap and on top of that I have some dynamic text (embedded fonts).
The bitmap is supposed to create a feathered edge on the photo but since they alpha at different rates, you always see the hard edge of the photo...
is there a solution like cacheAsBitmap which would let the whole clip alpha at once? If it's cacheAsBitmap, i must be using it incorrectly, b/c it's not working!
Am trying to use the Tween class to scale and move a movieclip. Now the movieclip is within the loader, so I need the motion to be controlled by the percentage loaded. Now the code to move the movieclip to its final position is:
var xscaletween:Tween = new Tween(mstone, "_xscale", Regular.easeOut, mstone._xscale, 220, 6, true);
But this is the final location, I want to be able to change the properties of xscaletween, yscaletween, xmovetween and ymovetween as per percentage loaded.As in, within this final boundary limit of the tween, I want, for example, xscaletween, to scale only till 140 till percentage hits 50. Is this possible?? If not is there a workaround?Or do I have to use new tweens within each percentage limit?
I am trying to understand the thinking behind motion tweening using AS3 (rather than doing it on the timeline).I am trying to create a simple platform game, and while this is simply a learning project, I have an movieclip instance on the stage, and using basic x+5 logic I can get the instance to move left and right on the stage accordingly.Trying to make the instance 'jump' is a bit trickier. This is the code I am using:
ActionScript Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;[code].....
I thought this code would move the instance from it's current y-position and tween it to it's highest jump point. From here I planned to use a MOTION.FINISH event to tell it to tween back to it's original position.Something strage happens though, rather than tween from the current y position and move up, the instance instantly transforms it's position to y+100 and then tween back to the original position. So it kind of turns out that it is the second part of the jumping action that I want to create.
I'm using some code that tweens menu text color on rollover. This basic code works, but I'd like to tighten things up and create a single function that is called on rollover and rollout. The code that needs help is below - create a dynamic textfield and convert it to a movie clip called "textfield_mc".
Code:
var default_color:Number = 0x939672;
var rollover_color:Number = 0xc6c3ab;
var selected_color:Number = 0x63481d;
[Code]....
I have 4 buttons that are part of the main tween (they are scrolling across the screen).When you hover over one they do a small animation.When you click it you get sent to a web page in a new window.Up to here everything is working fine.I'm trying / need to get the whole scrolling animation to stop when hovering over one of the buttons, i tried adding "onrollover" to each button with referance to the main movie - nothing.Tried adding a code in my action frame that applies to every button..
View 1 Repliesi�m trying to stop a tween with mouse rollover, but when i put this code on:
on (rollOver) {
_parent.stop();
}
on (rollOut, dragOut) {
_parent.play();
}
it stops me all the tweens! i want to stop only the tween with the code...
I use laco's tween class for a button color fade. A bit like on the Laco navigation itself : [URL]
It works, only, when the mouse moves a little too fast over the button, it delays, like the mouse didn't went over that button, what gives a pretty annoying effect, like a bug... this is the code I use :
menu1.onRollOver = function ()
{
this.colorTo (0xFF0099, 0.1);
}
[Code].....
With the script below I am making a ball move from left to right and back. but when I rollover twice quickly, it also accepts the second rollover command. I would like it to accept that second rollover only when the first one is finished. I mean, I want the first to be finished before it accepts another rollover. I know it is simple to solve this with a tween using frames instead of as, but I was wondering if someone knows how to adapt the script.
[Code]...
