ActionScript 2.0 :: Buttons Not Working On Tweened Mc?
Jul 24, 2008
I've got a movieclip called screenHover, which will fade in on rollover and fade out on rollout. It will contain some buttons, and basically work in the same way as the Brightcove-player. Here is the AS-code I'm using for tweening the mc;
ActionScript Code:
// Import classes for the fading of the rollOverControls.
import mx.transitions.Tween;[code].....
Now, the buttons inside of the movieclip don't work when I use this tween. When I comment it out, the buttons inside work perfectly. Why? - It looks so good, but I need both the tween and the buttons.
*EDIT* Oh, the first line where the _alpha is set to zero is commented out in this code, but it doesn't make any difference, though. It was just me playing around trying to figure things out.
View 3 Replies
Similar Posts:
Aug 20, 2010
I have created set of dials/meters with moving arms that change as buttons are pressed. The arms move based on a "Classic Tween" set-up I created. I then applied my buttons to the flash document and then coded in some "gotoAndPlay" on an actions layer to get the arms on the dials to move when I click on the buttons. My problem is that since I have 3 buttons (High, Medium & Low) and the tweens follow one frame right after another (0, 41,78) there is no stop. When I click on Low it plays the low tween, the medium one, and the high tween. When I click on the medium it plays both the Medium and then the High. The High button obviously only plays itself. I don't know how to insert a stop between these buttons.[code]...
View 10 Replies
Aug 20, 2010
I have created set of dials/meters with moving arms that change as buttons are pressed. The arms move based on a "Classic Tween" set-up I created. I then applied my buttons to the flash document and then coded in some "gotoAndPlay" on an actions layer to get the arms on the dials to move when I click on the buttons. My problem is that since I have 3 buttons (High, Medium & Low) and the tweens follow one frame right after another (0, 41,78) there is no stop. When I click on Low it plays the low tween, the medium one, and the high tween. When I click on the medium it plays both the Medium and then the High. The High button obviously only plays itself. I don't know how to insert a stop between these buttons.
stop();
low_btn.addEventListener(MouseEvent.CLICK, onLow); function onLow (Event:MouseEvent):void {
gotoAndPlay(0) }
med_btn.addEventListener(MouseEvent.CLICK, onMed); function onMed (Event:MouseEvent):void {
gotoAndPlay(41) }
high_btn.addEventListener(MouseEvent.CLICK, onHigh); function onHigh (Event:MouseEvent):void {
gotoAndPlay(75)
}
View 3 Replies
Aug 12, 2009
im working on a zoom/pan gallery and i have a problem that i can't solve.URL...the pan buttons are not working but the zoom and reset buttons works. im working on movie the image using the mouse now, if you will hold the image and move it it will drag it on stage.the image is a loader the loads and image and placed on screen.there is a mask on top of it and a frame that indicates the size of the gallery.when the user pan the image loader content i want it to stop as soon as it gets to the gallery frame,but i cant seem to find the best way to do it.so basicly when the image is in 100% i dont want the user to be able to drag it but after you zoom the user will be able to drag it but only to the edge of the frame so there wont be any white spaces.i tried a lot of different ways to do it but all of them are complicated and not working the way that i want them to work.
View 2 Replies
Sep 14, 2009
I have three buttons and when I click the second one, the first stops working (e.g. no trace event and it won't go back to the frame "tab1") but the third still works. Then when I press the third button both the first and second no longer work. If I take out the gotoAndStop lines, the buttons work fine. The subsequent frames simply have stops on them.
b1.addEventListener(MouseEvent.MOUSE_UP,b1Pressed);b2.addEventListener(MouseEvent.MOUSE_UP,b2Pressed);b3.addEventListener(MouseEvent.MOUSE_UP,b3Pressed);
function b1Pressed(event:MouseEvent){ trace("b1 pressed");
[Code]....
View 4 Replies
Jul 22, 2009
Been trying to solve this for a couple days now. I have an invisible mc that rests on a layer above a movieclip that tweens on the button roll over and scales to show another side of the card with info and two links. The links are mc buttons within the tweened mc. I cannot get the two buttons to work. Im certain its because the invisible button that triggers the twin is overtop the moveclip these buttons are in, and it cannont find the button to trigger. Anyone know how to make buttons on the same plane?
View 1 Replies
Sep 4, 2009
I am just trying to get my as3 tweening skills locked down around the basics. So, for this example, I have a logo / home button fading in, this code is working for that... however, is there a way to addChild (home in this case) via the tween code, so that I do not have to add the child at alpha0 "then" fade it in?
import fl.transitions.Tween;import fl.transitions.easing.*;
var home:Logo = new Logo();addChild (home);home.x = 400;home.y = 300;home.alpha = 0;
var fadeIn:Tween = new Tween(home,"alpha",None.easeNone,0,100,200,true);
View 6 Replies
Jan 20, 2009
I'm creating a very basic tween of an image which scales down to half it's size. It looks fine in Flash but when published the scaled down image looks like crap, all pixelated. I've done this hundreds of times in other versions with no problems except now. The publish setting for jpeg is set at 100% etc...
View 1 Replies
Oct 28, 2009
Sometimes in Flash, alpha transitions will just drop out without reason. They still appear in the preview mode, but when you export a swf it drops all tweened alpha animations. they become cuts instead. I've even tried opening the same file in CS4. Same dilemma.
View 1 Replies
Apr 23, 2011
I animated my buttons in a movie clip (content_mc) and now I am getting an error:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at slashhome002_fla::MainTimeline/frame1()
I am accessing the button from my main timeline with:
content_mc.capabilities_btn.addEventListener(MouseEvent.CLICK,capabili tiesClick);
function capabilitiesClick(e:MouseEvent):void{
content_mc.x = 1000;
content_mc.y = 0;
}
Before the buttons were tweened they worked fine.
View 1 Replies
May 12, 2010
I have a string of about 5 movieclips that are tweened so that when you click left or right they slide in that direction. When you click on the movieclips themselves I want them to:
on mouse down - move to (y-5)
on mouse-up - move back (y+5)
this all works fine, however after I have clicked on one of the movieclips to make it jump, when I click left or right to slide them all over again they don't slide with the rest of the clips anymore?
View 1 Replies
Jun 10, 2010
I have some text that I'm starting at a large size, and Classic Tweening it down to its regular 100% size. Originally, the text was Static, and it Tweened smoothly... but I had to make it Dynamic Text, and now the animation is very jerky!
View 3 Replies
Jan 7, 2011
I have an embedded video on time line. I gave it an instance name and tweened it to move left using the tween class. Video moves as expected, but while moving it stops playing itself. I want the video to play as well as move.
View 0 Replies
Aug 26, 2011
How would I go about accessing the object I am moving with a tween through TweenEvent? or is this even possible? I think e.currentTarget will give me the tween object instead of the movieclip it is controlling, but I'm not sure.
Example:
ActionScript Code:
var tweens:Array = new Array();
[code].....
View 1 Replies
Dec 18, 2011
I have a button that when pressed moves out of view and moves a second button into view. Then I have two movieclips, they look the same only one is animated and the other isn't, both on different layers. That part is working just fine. What I also want the button to do when clicked is show the animated movieclip (and hide the other if possible, but not necessary since it'll be under the animated one). Now I haven't gotten that far because I can't even get the animated movieclip to be hidden! I've been using visible = false; command for everything and it's been working up to now. Is it possible to hide a tweened movieclip? (It's a classic tween)
[Code]...
View 1 Replies
Aug 26, 2011
How would I go about accessing the object I am moving with a tween through TweenEvent? or is this even possible? I think e.currentTarget will give me the tween object instead of the movieclip it is controlling, but I'm not sure.
Example:
Code:
var tweens:Array = new Array();
var aryObjects:Array = {mc1,mc2,mc3,mc4};
function someFunction():void {
for(var i:int = 0; i < aryObjects.length; i++) {
[Code] .....
Is it possible to access current mc the tween is moving through TweenEvent here? If not possible, how would I pass the current object in the loop to the function? I had one idea of creating a function within the addEventListener line and passing both the event and current object, but it is not working for some reason.
Code:
tweens[i].addEventListener(TweenEvent.MOTION_FINISH, function done(e:TweenEvent){tweenFinished(e,aryObjects[i]);});
I know that Tweener or TweenLite would work well but I want to do this without using them.
View 3 Replies
Oct 22, 2008
I have 3 pictures and animated it using motion tween asusual.Now, I want to create a slider so that user can drag alongforward and backward so that the tweened animation movesaccordingly. Eg the whole motion ends in 10 secIf user drag slider to far right it goes to 10 sec frame andif it position to middle the movie go to 5th sec. etc.How to do this to associate the slider to frames ?
View 5 Replies
Oct 25, 2009
I'm trying to update a dynamic text field based on the scaleY value of a mask that I'm tweening using TweenLite. Example: as the mask scales from 1 to 0, the date in my text field would change from 1970 to 1980. But it doesn't want to broadcast that scaleY property during the tween.
View 1 Replies
Mar 28, 2010
why my key frames are disappearing when i turn my shape tween into a mask. I have shape tweened a mask ontop of a tree branch and all the frames are there as a plain shape tween, but when i turn that layer on as a mask the key frames go blank..
View 3 Replies
Oct 6, 2010
In flash cs4, i've created motion tweens on 4 separate layers with 4 different movie clip symbols that were created with the pen tool. it seems to be fine when i scrub the playhead, but when i test the movie, 2 of the movie clip graphics distort, and the bottom halves of them move faster than the top halves.
View 2 Replies
Jan 20, 2010
I've been working on an AS3 application and it's nearing completion. At the same time, one of the designers I work with has been building a movieclip in a separate .fla that acts as an intro animation to the application. The intro uses the 3D motion tweening capabilities of Flash CS4 / Player 10, and runs fine in the .fla in which it was built. The problem is that when I import the movieclip into the main .fla for the application, when I dynamically instantiate the movieclip and add it to the stage, I get a barrage of the following runtime error:
ReferenceError: Error #1069: Property null not found on fl.motion.KeyframeBase and there is no default value.
at fl.motion::KeyframeBase/getValue()
at fl.motion::MotionBase/getValue()
at fl.motion::Animator3D/setTime3D()
at fl.motion::AnimatorBase/set time()
at fl.motion::AnimatorBase$/processCurrentFrame()
at fl.motion::AnimatorBase$/parentEnterFrameHandler()
I'm guessing just based on the number of errors like this that I receive that there's one per keyframe in the tweening movieclip. I've checked to ensure that the Flash publish settings are identical across the two .fla files, and although the stage sizes differ slightly, I don't think that's the issue here.
View 2 Replies
Aug 23, 2009
I have a problem with a timer-controlled event. The animation breaks on half of its way - the tweened textfield gets pulled back only half the way as if the timer finished too fast. Here is my code:
PHP Code:
function throwErrorMessage (e:Event):void {
var metaErrorTween:Tween = new Tween(__errorText_txt, "y", Strong.easeOut, -32, -2, 65, false);
var__autoToggleTimer:Timer = new Timer(1000, 1);
__autoToggleTimer.addEventListener(TimerEvent.TIMER, autotoggleErrormessage);
__autoToggleTimer.start();
} function autotoggleErrormessage(e:TimerEvent):void {
[Code] .....
View 2 Replies
Sep 7, 2010
I have some text that is scrolling across the page like a news ticker you would see at the bottom of your TV screen on a news channel.This scrolling text has anchor tags on it (clickable links). It is a dynamic text box inside a movieclip. Problem is, I'm using the build in AS3 Tweener to animate the text across the page and 99% of the time I cannot click the links. The mouse cursor turns to a hand when I hover over the scrolling text but clicking does nothing. If I click really fast and randomly it just might work but it hardly ever does.Do I need to apply a 'display: block' type style to it?Should I use a different tweener?
View 9 Replies
Nov 27, 2010
Well, there's a web page that shows this effect, but I can't post links here (<50 post count) so I'll just have to describe it in words.
The flash content is a rectangle in the center, which is centered depending on the browser size. This would probably be the size of the stage.
What I'm interested in is the dynamic background that fills the screen with a shape. What seems to be happening is this[code]...
View 8 Replies
Mar 4, 2006
Now I know I can use the MCTween classes for this, but I want to figure it out myself
I have
Code:
MovieClip.prototype.blurTo = function(strength, size) {
//Blur and tween fn.
var myBlur = new flash.filters.BlurFilter(size,size,strength);
[Code].....
What I can't figure out for the life of me, is how to disable the blur when the object being tweened comes to a halt?
View 2 Replies
Aug 15, 2009
K so i started this flash site and made buttons that open little sliders underneath them that load subcategory's. the problem is i cant get the buttons on the little slider to load a external swf file in a loader on my flash .
// sub bar button functions
}
recon.onRelease = function () {
main.contentPath = "Recon.swf,";
}
View 1 Replies
Oct 29, 2008
I have a few MovieClips that are motion-tweened via the timeline. I have a function that places a glow filter on the tweened movieclip. The glow works, but... the movieclip no longer moves. I found that if I tween via actionscript (AS3) that it does tween. However, I have about 1000 movieclips, all w/ different tween properties.Is there a (much easier) walk around or am I going to have to code for a few days/weeks?
View 1 Replies
Apr 15, 2011
explain why the lines drawn between the circles in the code below are not aligned with the centre of the circles? It seems the x and y properties of the circles are not up to date with their actual positions but how can this be?
import flash.display.Sprite
import fl.transitions.*;
import fl.transitions.easing.*;
var mcs=[];
[Code]...
View 1 Replies
Jun 23, 2009
I dont understand why this text is so shaky and wobbly when tweened, what am I doing wrong?
View 2 Replies
Oct 22, 2010
I've created a movieclip of a trashcan, which falls over and 6 items fall out of it. I want each of these items to become a button, which will jump to a different point on the timeline.
The movieclip is all working fine, and the buttons appear to be fine. The problem is when I publish the flash, the movieclip resets each time I hover over one of the buttons, so i get an endless loop of this trashcan falling over and the items falling out.
View 1 Replies
