IDE :: Buttons In Mc Not Working?
Aug 15, 2009
K so i started this flash site and made buttons that open little sliders underneath them that load subcategory's. the problem is i cant get the buttons on the little slider to load a external swf file in a loader on my flash .
// sub bar button functions
}
recon.onRelease = function () {
main.contentPath = "Recon.swf,";
}
View 1 Replies
Similar Posts:
Aug 12, 2009
im working on a zoom/pan gallery and i have a problem that i can't solve.URL...the pan buttons are not working but the zoom and reset buttons works. im working on movie the image using the mouse now, if you will hold the image and move it it will drag it on stage.the image is a loader the loads and image and placed on screen.there is a mask on top of it and a frame that indicates the size of the gallery.when the user pan the image loader content i want it to stop as soon as it gets to the gallery frame,but i cant seem to find the best way to do it.so basicly when the image is in 100% i dont want the user to be able to drag it but after you zoom the user will be able to drag it but only to the edge of the frame so there wont be any white spaces.i tried a lot of different ways to do it but all of them are complicated and not working the way that i want them to work.
View 2 Replies
Sep 14, 2009
I have three buttons and when I click the second one, the first stops working (e.g. no trace event and it won't go back to the frame "tab1") but the third still works. Then when I press the third button both the first and second no longer work. If I take out the gotoAndStop lines, the buttons work fine. The subsequent frames simply have stops on them.
b1.addEventListener(MouseEvent.MOUSE_UP,b1Pressed);b2.addEventListener(MouseEvent.MOUSE_UP,b2Pressed);b3.addEventListener(MouseEvent.MOUSE_UP,b3Pressed);
function b1Pressed(event:MouseEvent){ trace("b1 pressed");
[Code]....
View 4 Replies
Oct 22, 2010
I've created a movieclip of a trashcan, which falls over and 6 items fall out of it. I want each of these items to become a button, which will jump to a different point on the timeline.
The movieclip is all working fine, and the buttons appear to be fine. The problem is when I publish the flash, the movieclip resets each time I hover over one of the buttons, so i get an endless loop of this trashcan falling over and the items falling out.
View 1 Replies
Apr 29, 2010
the buttons within my submenue movie clip don't work. the one's not within a submenu work fine. my code validates and i'm not getting any errors what else i should be checking?
[Code]...
View 2 Replies
Oct 13, 2009
I am having problems with buttons stopping to work after i have added some actionscript elsewhere in my timeline. I have a buttons layer which runs across the entire timeline which consists of a Next, Back, Menu and Support button, which all work fine as long as i dont go through the following script on one of the frames.[code]The Submit button has a different instance name than all my other buttons so i am at a loss as to why this has any effect on them.
View 5 Replies
Dec 5, 2008
I have some buttons in a movie clip, and while they work when previewing flash, they don't work in the browser. I am using geturl on the buttons, and I'm thinking they are not functioning because they are within movie clips.
View 1 Replies
Aug 28, 2009
CS3 flash buttons are not working....i've tried so many times, but its not working at all, code is simple:
on (release) {
getURL("home.html", "_self");
}
i'm using Dreamviwer CS3, XP-SP3, IE7. attaching the zip file having the site, fla, HTML, swf file...
View 2 Replies
Sep 30, 2009
I am migrating from AS2 to AS3 and realize the button functionality is totally different. I have a website with buttons that have submenus. I have the first layer of buttons working. They have eventListeners attached that take them to a labeled frame on the timeline. When you get to that labeled frame there is a submenu of buttons there. I tried putting the code for those buttons in the same script on frame 1 but it messes up the movie.
I think it has something to do with the buttons not actually being there on frame 1 when the script is read. I cannot figure out where to put the script for the submenu buttons to make them work. I think I have to put a parent type script in there. Sorry I dont even know what to look up.
Here is the link to the site: [URL]
Here is the code on frame 1:
Code:
stop();
function goCollections(e:MouseEvent):void {
gotoAndStop("collections");
[Code]....
View 2 Replies
Jan 1, 2010
I've got a movieclip which contains 4 buttons and 4 labels.
The buttons work but once you've been past a label it won't go back to a previous label so it's just linear.
I'm using the following coding:
Buttons: arrow1, arrow2, arrow3, arrow4. And the labels are the same for each.
ActionScript Code:
PHP Code:
arrow1.onPress = function() {
gotoAndStop("arrow1");
};
arrow2.onPress = function() {
[Code]......
View 2 Replies
May 11, 2010
I have two buttons at the bottom of my animation which should work all the way through the timeline. They work when you click on the chrome icon in the animation, but when you click on either Firefox or any of the other browser thumbnail buttons, the links stop working and nothing happens when you click them?
Here is a link to download the FLA file - [URL]
View 4 Replies
May 30, 2011
This seems like such an easy thing to do but it's driving me crazy. Sorry if this is a simple question. In a site I am building it is necessary to have a large movieclip overlaid over an image gallery. This movieclip controls scrolling so has a rollover listener attached, but of course the gallery pictures also need to have button actions. I cannot get them both working at the same time. How can I make it so that rolling over a movieclip doesn't disable the rollover for any movieclips underneath it? Here is a very simple example of the problem. Where the two buttons intersect, I want for the rollover to trigger them both: [URL]
View 1 Replies
Oct 29, 2009
I have 2 main movie clips, one for the menu bar and one for the content, there is then a movie clip within each one of those, one to hold the set of buttons, and one to hold the content movie clips. The menu bar has a control to flip between 2 sets of buttons. the viva content button works fine to begin with, but after the menu bar control is clicked, the content buttons stops working. Code is as Follows: All of the code (bar a few stop() flags on cirtain frames) is located on frame 1 of the root, which is the only frame on the root.
barControl.barContent.barUp.addEventListener(Mouse Event.CLICK, menuSwitchHandle); barControl.barContent.barDown.addEventListener(Mou seEvent.CLICK, menuSwitchHandle); barControl.barContent.barMenu.vivaBtn.addEventList ener(MouseEvent.CLICK, vivaHandle);
[code]........
View 3 Replies
Dec 3, 2009
I am really struggling, I have some buttons on layer 0 I then have a pop up box on layer 1 that covers the buttons. However the buttons are still active underneath.
View 9 Replies
Jun 13, 2010
Nothing has changed, no editing was done, and all of a sudden, buttons not working. I trued exporting from Flash again, with the same pblish settings. Bit Action Script seems to give me a message now saying it wont export as a button. Tried AS 2.0 and 3.0, but i made original files in 3.0
View 6 Replies
Nov 8, 2010
I am making a test that when you hit next it goes to a specified frame and if you hit back it goes back to the previous specified frame. The code works when I go through the code once all the way forward and back but once I try to move forward again it skips over all the inbetween pages and ends at the final page. The back button code works fine it is only the NextBt code that isn't working right.
[Code]...
View 9 Replies
Aug 4, 2011
ive made a simple button that sends you to the first frame. and its working good but than when i duplicate it only 1 button works i got 33 buttons and only one of them is working....
View 4 Replies
Oct 5, 2011
I've created a banner and made the whole area clickable with an invisible button. But there's one small element in that banner I'd like to give a roll over state for extra fun. This element doesn't need a link hooked to it just to change colour when moused over. When I put the invisible button on top, it blocks the element on top the invisible button is not working either. Since it's a banner I have the document set up in as2.
View 4 Replies
Oct 7, 2008
I want a Movie Clip to house 5 buttons that will link to frame labels on the main time line.(this will be my main menu navigation)I have created 5 separate buttons then created a Movie Clip.dragged each of the 5 buttons into the movie clip gave instance names for all of them.then I dragged the movie clip to my main timeline and gave that an instance name.I then went into the Movie clip and attempted to use AS3 to get the button instances to navigate to the frame labels.no go
when I test my movie it keeps looping through the whole main timeline no matter how many stop commands I put in the main timeline or in the Movie clip itself.if I have no AS in the Movie clip then the movie tests with the Movie clip working (no scrolling through the timeline and rollover works fine but I still can not command the CLICKs).as a post script I have tried so many AS variables I thought it best to not enter any here
View 9 Replies
Jan 7, 2009
I have created a drop down menu but the problem is that the buttons won't work i.e. olad the external swfs
The a snippet of the code i used is placed on the main timeline
ActionScript Code:
menu_mc.btn1.onRelease=function(){
loadMovie("Bee.swf",content_mc);
}
View 1 Replies
Nov 14, 2009
I'm using the code:[code]in order to direct button named "one" to open website.html in a frame named mainFrame. However, when I then use the same code on each button, opening different URLs it no longer works; whichever button you click on first will open in mainFrame, but any button you click after this will open in a new window.
View 2 Replies
Jan 2, 2010
I've got a movieclip which contains 4 buttons and 4 labels.
The buttons work but once you've been past a label it won't go back to a previous label so it's just linear.
I'm using the following coding:
Buttons: arrow1, arrow2, arrow3, arrow4. And the labels are the same for each.
ActionScript Code:
arrow1.onRelease = function() {
gotoAndStop("arrow1");
[Code].....
View 1 Replies
Sep 15, 2010
I have a dynamic text field with scrollbar buttons that work in Firefox, chrome and safari but not IE8. I wish I could forget about IE8 but it's not possible yet. The following code is being used.
on (press) {
myText.scroll=myText.scroll-1;
}
[code].....
View 3 Replies
Oct 22, 2010
I've created a movieclip of a trashcan, which falls over and 6 items fall out of it. I want each of these items to become a button, which will jump to a different point on the timeline.
The movieclip is all working fine, and the buttons appear to be fine. The problem is when I publish the flash, the movieclip resets each time I hover over one of the buttons, so i get an endless loop of this trashcan falling over and the items falling out.
View 0 Replies
Jan 3, 2011
I am new to Flash and ActionScript. I have been trying to put up a website, but I have run into one issue that is preventing me from having a functional page. The buttons do not work.I have set the instance names and converted things to symbols and so forth, but neither of the methods I have tried work.The first method I list below simply does not work, no errors listed, just no function.The second method I tried resulted in an error occurring whenever I clicked a button. The error was "ReferenceError: Error #1069: Property num not found on flash.text.TextField and there is no default value.[code]
View 2 Replies
Dec 20, 2011
I am trying to make a back button using the gotoAndPlay function but whenever I go back to the page I wanted to, the actionscript buttons don't work.[code]...
View 7 Replies
May 12, 2005
i'v created two buttons, Start and Stop, that I've have put into a movieclip. I've done so beacause I only want the user so see one button at a time. (I've managed to make it work with 2 buttons, but I'd like to know why it doesn't work with a movieclip and 2 buttons)
So when the user clicks the "Start" button the sound starts playing and the movieclip is set to frame 2 where the stop button is. So far so good, but when I'm trying to click the "Stop" button nothing happens. Here's the AS:
PHP Code:
stop();
current_mp3 = "audio.mp3";
function primeSound() {
mySound = new Sound();
[code]....
View 7 Replies
May 30, 2007
Has anyone come across this?
I've created a button with a rollover state and everything. Popped it on the stage and gave it an instance name of "myBtn_btn".
on root i wrote this:
myBtn_btn.onRelease = function(){
trace("hello world");
}
but nothing happens. I have many other buttons. all do different things and work find. everything has a different instance name. no linkage is the same. I've double checked and triple checked that the name is "myBtn_btn" in the function AND the button. I've even tried recreating a different button with different names and still nothing. It's like I can't make any more button actions.
View 1 Replies
Jul 24, 2008
I've got a movieclip called screenHover, which will fade in on rollover and fade out on rollout. It will contain some buttons, and basically work in the same way as the Brightcove-player. Here is the AS-code I'm using for tweening the mc;
ActionScript Code:
// Import classes for the fading of the rollOverControls.
import mx.transitions.Tween;[code].....
Now, the buttons inside of the movieclip don't work when I use this tween. When I comment it out, the buttons inside work perfectly. Why? - It looks so good, but I need both the tween and the buttons.
*EDIT* Oh, the first line where the _alpha is set to zero is commented out in this code, but it doesn't make any difference, though. It was just me playing around trying to figure things out.
View 3 Replies
May 25, 2009
I have 9 movieclips, and 9 buttons. (mc1, mc2, mc3.... & btn1, btn2, btn3...)
I'd like it so that when you rollover the button, the corresponding movieclip begins an animation.
I thought I was on the right tracks here:
Code:
for (var i:int = 0; i < 8; i++) {
this["btn"+i].addEventListener(MouseEvent.MOUSE_OVER, onButtonOver);
this["btn"+i].addEventListener(MouseEvent.MOUSE_OUT, onButtonOut);
this["btn"+i].addEventListener(MouseEvent.CLICK, onButtonClicked);
[Code].....
I just can't seem to direct a tween to a corresponding movieclip dynamically.
View 2 Replies