I am trying to have a movie unload in a different scene using this bit of script:
if (ct == 15) {
_root.gotoAndPlay("winner");
unloadMovie(this.parent.wally);
}
The movieclip is called "wally". It is just not working.
ive made a button in the scene 1 which i have managed to navigate to scene 2 but when i click the button it goes to scene 2 but displays everthing that is in scene 1 in scene 2, how can sort this out so upon the button click in scene 1 it goes to scene 2 and only display content in scene2.
[Code]...
Check out this code:
[CODE]...
everything here is fine. It opens finely. But... i want to pass parameters where if i click a button in html page My.swf should open a particular scene called 'Scene 2' rather than scene 1. i tried
[CODE]...
I am having a similar issue to this post except that I am using only AS2 at the moment.[URL]..I call a swf file to load into a loader like this music_mc.loadMovie("music/song.swf").
When I unload the movie clip like this: music_mc.unloadMovie() and try and load it again, it does not want to load again.
I have a set of buttons on a map that when clicked load in a zoomed version jpg file into an empty movie clip. When the loaded jpg / mc is clicked, I want the loaded movie to fade out as it unloads. The fade in is working fine, but I've tried several examples I've found online for the fade out and none of worked yet.
View 1 RepliesI have a flash game that randomly drops balls and you try to catch them however once you win or loose I cant get the balls to stop falling?
Code:
//random ball fall
allBalls = new Array();
depth = 0;
function makeNewClip() {
[code]....
I'm a student web designer from Toronto, ON working on a flash interface for an art show.In our flash file (AS 2.0), I need a piece of code to constantly check a set of variables. If the variable reaches 2, I want it to unload the current movie, therefore I also have a set of buttons which each increase the current variable by +1 every time they are clicked. Therefore once 2 buttons were clicked, the movie would be unloaded.[code]
View 4 RepliesI am making this site that reaquires me to unload a movie when i press the button but after i need another movie to load. How do I do this. These are the two movies:unloadMovie:Photo_HolderloadMovieThumbs_Holder
View 5 Repliesi have this code that load on a keyframe
loadListener.onLoadProgress = function(target_mc:MovieClip, bytesLoaded:Number, bytesTotal:Number):Void {
info.text = Math.round((bytesLoaded/bytesTotal)*100)+"%";
[Code]....
Because the swf_loader are mp3 player and if i change page wihout having press the stop button first the music is still playing. I have try to just add swf_loader.unloadMovie(); on every other keyframe but it doesnt work. i guess i have to find out where this swf_loader exist/is included right?
im making this website in AS2 using SWFaddress for the first time. everytime a new page in flash is requested trough swfaddress i need the menu to be remade, so i unload the previous menuitems en load new ones.
the problem is if the unloadmovie works the new items aren't made, but if i reload that same page it will show. so when items are unloaded new ones aren't made and if no items are there to be unloaded new ones are made...
here's my code
ActionScript Code:
function createMenuNow(){
trace("_______create menu now_______");
[Code].....
Is there a way to create something like an "on unloadMovie"-script?
View 3 RepliesI'm new and I've got a problem I've been trying to fix for a couple days and haven't been able to.I am loading youtube videos in to movie clips with actionscript on a frame:
this.video_mc1.loadMovie ("http://www.youtube.com/v/URL");
this.video_mc2.loadMovie ("http://www.youtube.com/v/URL");
this.video_mc3.loadMovie ("http://www.youtube.com/v/URL");
[code]....
When a button is clicked in my main movie, a swf loads in a container clip. When the "BACK" button is clicked on the loaded .swf, the .swf is unloaded but the buttons I have on my main timeline no longer work.
code on main timeline of main movie:
Code:
this.main.nav.project.onRelease = function() {
trace("Project Clicked");
_level0.main.play();
[Code]....
I am building a website that has a separate .swf for each page of the site. Each page is loaded into shell_mc using loadMovie. When a new page loads, I run shell_mc.unloadMovie before calling shell_mc.loadMovie(newPage). I am just wondering if the unloadMovie command will destroy everything in the current page that might take up memory before it begins loading a new page.
View 1 RepliesI am trying to incorporate the facility to recover an object that has been deleted by the user. When he presses delete, i unload the movieclip. So if I want to recover it, complete with its last width, height, x and y positions, how do I do it? Is there some inbuilt function? or do I have to use some programming to do it, like save the object properties before deleting and all? The object could be any one of about 5-6 of them in my library, so knowing at run time which one to attach is impossible. So I need something to recover exactly the movie clip that was unloaded. I don't think attaching a new one and setting its properties will work. Very simply, I could just set the _visible to false when he presses delete, but then, thats not a very good practice I feel.
View 9 RepliesI have created an interface that uses a lot of the loadMovie command using levels. Once I have loaded a movie on say level 3...in that level 3 movieclip I will have another navigation that will load and then use the loadMovie command to load movie on level 3 as well. It loads it correctly but the back button that would contain the unloadMovie(3) command isn't unloading, say if the user wants to go back.
View 2 Repliesi have a audio track in a movieclip that i am loading into a target and i am doing an unloadMovie to remove it from the stage, but the audio clip continues to play until it hits the end/loop point... so my question is, how to i make it stop as soon as it unloads?
View 3 RepliesI have an AS2 .swf being loaded as a child of a parent AS3 .swf. The AS2.swf calls loadmovie() and unloadmovie() to display 3 jpeg files. The images load the first time, but after that, a call to loadmovie() to replace the image, or a call to unloadmovie() fail. I found the following Adobe Bug report ([URL]) that has said this has been resolved, and also said that child movieclips could be replaced without a problem. Here is the code I'm calling.
[Code]....
unload some duplicated movieclips. Sometimes the script is not unload all the movie clips. And on frame 2, how to say by scripting "not go to next frame if all the movieclips is not unload"? Well the script is:
[Code]...
What (if any) is the actual differance between removeMovieClip() and unloadMovie() for use in erasing duplicated movie clips (using duplicateMovieClip() )? I was looking over some of my code and noticed I used both without much rhyme or reason as to why one over the other.
View 4 Repliesi have a little problem with the unloadMovie command. i have a button which is mc2_about here is the code
[Code]...
where i want to unload level1 which is a scrollbar with a text and load the portfolio section in an empty container... my structure i want to load in an empty container the swf's of the main navigation (home- portfolio,etc) and the sub-menus of it's categories[about me-print-web design) into levels. is there a simpliest way of doing that?
so I have some buttons that, as of right now, simply trigger the scene to move on while at the same time killing some particle effect animations I have spawning when the animation is idle. What I now need to do is make these events move on to a specific scene AFTER the rest of the scene's animation has played out (about 400 more frames) I'm figuring that the gotoAndPlay command has to be tied to some sort of timer variable that I would have to figure out based on my fps. Or maybe there is a way to set up a timer directly tied to a certain amount of frames allowed to go by. I'm pretty noob at actionscript, so keep that in mind. Here is the script at the point where the animation pauses to await user input on the buttons:
[Code]....
No..not that type of parenting ;DOK,I have a main scene, then sitting in the root scene I have 2 movie clips.1)centro2)fotoIn the first movie "centro" there is a menu btnI want this menu btn to call up mclarge + its frame (1) thats housed 3 levels inside the foto mc in root.
Main scene - (1) centro (banner which houses menu btn)
(2) foto_mc
- Main_boy_mc (<---works if menu btn houses in here)
[code].....
I have a movie with 4 or 5 scenes. How can i make the movie jump from scene 1 to another scene by clicking on a button?
View 5 RepliesArgumentError: Error #2109: Frame label null not found in scene Scene 1. at flash.display::MovieClip/gotoAndPlay() at intro_fla::MainTimeline/intro_fla::frame606()[intro_fla.MainTimeline: :frame606:3]
View 3 RepliesI'm trying break down a large Flash project into smaller swf's using a Loader :
stop();
var reqA:URLRequest = new URLRequest("New_Inro.swf");var loaderA:Loader = new Loader();
function imageLoadedA(event:Event):void { addChild(loaderA);} loaderA.contentLoaderInfo.addEventListener(Event.COMPLETE, imageLoadedA);loaderA.load(reqA);
Some of these swf files are animations which have code that states :
MovieClip(parent).gotoAndStop("frameThree");
The first loader works but I cannot get that swf to move on to the next frame(frameThree) to load the next swf file
Instead I get this message
ArgumentError: Error #2109: Frame label frameThree not found in scene Scene 1. at flash.display::MovieClip/gotoAndStop() at New_Inro_fla::MainGuy_1/frame146()[New_Inro_fla.MainGuy_1::frame146:2 ]
I'm getting this error in the OUTPUT window, when I PREVIEW (COMMAND + RETURN) my SWF:
ArgumentError: Error #2109: Frame label nGallery_btn not found in scene Scene 1.
at flash.display::MovieClip/gotoAndStop()
at BrookBrovazMusic004_fla::MainTimeline/pageSelect()
- The funny thing is that the SWF works the way I want it to. You can view it here: http://brookbrovaz.com
- I just don't like the idea that something's wrong, according to the OUTPUT window anyway.
[Code]...
the error is:
ArgumentError: Error #2109: Frame label instance121 not found in scene Scene 1.
at flash.display::MovieClip/gotoAndStop()
at Untitled_fla::MainTimeline/goLabel()
this is my code:
stop();
function goLabel(e:MouseEvent):void
{
[code]....
i am using a movie clip button to open a swf with a loader. hope i m not missing any information/other coding....
I've created a class which simulates an action for example a ball bouncing about a screen thus I'd create it like so:
Code:
var Ball1:ball = new ball(x,y);
How would I go about adding this to a loop, in a sense of every frame add another ball till you reach the maximum balls
currently after looking in help, google and forums this is all I could find
Code:
var ["Ball"+currentball]:ball = new ball(x,y);
but this doesn't seem to work and just causes
"**Error** Scene=Scene 1, layer=balls, frame=1:Line 15: Identifier expected"
I have created a new Flash file using A3.It has a menu system which all works, I have included trace code that outputs button pressed.So the next step is when the right button is clicked it takes them to the next scene. Please note I have coded it in AS3. When I compile it returns no error however at run time when I click on the buttomit returns the following error:
Menu 1, button 1
ArgumentError: Error #2109: Frame label contact not found in scene Scene 1.
at flash.display::MovieClip/gotoAndStop()
at menuformason_fla::MainTimeline/itemButtons()
[code]....