When a button is clicked in my main movie, a swf loads in a container clip. When the "BACK" button is clicked on the loaded .swf, the .swf is unloaded but the buttons I have on my main timeline no longer work.
code on main timeline of main movie:
Code:
this.main.nav.project.onRelease = function() {
trace("Project Clicked");
_level0.main.play();
[Code]....
I am trying to have a movie unload in a different scene using this bit of script:
if (ct == 15) {
_root.gotoAndPlay("winner");
unloadMovie(this.parent.wally);
}
The movieclip is called "wally". It is just not working.
I am having a similar issue to this post except that I am using only AS2 at the moment.[URL]..I call a swf file to load into a loader like this music_mc.loadMovie("music/song.swf").
When I unload the movie clip like this: music_mc.unloadMovie() and try and load it again, it does not want to load again.
I have a set of buttons on a map that when clicked load in a zoomed version jpg file into an empty movie clip. When the loaded jpg / mc is clicked, I want the loaded movie to fade out as it unloads. The fade in is working fine, but I've tried several examples I've found online for the fade out and none of worked yet.
View 1 RepliesI have a flash game that randomly drops balls and you try to catch them however once you win or loose I cant get the balls to stop falling?
Code:
//random ball fall
allBalls = new Array();
depth = 0;
function makeNewClip() {
[code]....
I'm a student web designer from Toronto, ON working on a flash interface for an art show.In our flash file (AS 2.0), I need a piece of code to constantly check a set of variables. If the variable reaches 2, I want it to unload the current movie, therefore I also have a set of buttons which each increase the current variable by +1 every time they are clicked. Therefore once 2 buttons were clicked, the movie would be unloaded.[code]
View 4 RepliesI am making this site that reaquires me to unload a movie when i press the button but after i need another movie to load. How do I do this. These are the two movies:unloadMovie:Photo_HolderloadMovieThumbs_Holder
View 5 Repliesi have this code that load on a keyframe
loadListener.onLoadProgress = function(target_mc:MovieClip, bytesLoaded:Number, bytesTotal:Number):Void {
info.text = Math.round((bytesLoaded/bytesTotal)*100)+"%";
[Code]....
Because the swf_loader are mp3 player and if i change page wihout having press the stop button first the music is still playing. I have try to just add swf_loader.unloadMovie(); on every other keyframe but it doesnt work. i guess i have to find out where this swf_loader exist/is included right?
im making this website in AS2 using SWFaddress for the first time. everytime a new page in flash is requested trough swfaddress i need the menu to be remade, so i unload the previous menuitems en load new ones.
the problem is if the unloadmovie works the new items aren't made, but if i reload that same page it will show. so when items are unloaded new ones aren't made and if no items are there to be unloaded new ones are made...
here's my code
ActionScript Code:
function createMenuNow(){
trace("_______create menu now_______");
[Code].....
Is there a way to create something like an "on unloadMovie"-script?
View 3 RepliesI'm new and I've got a problem I've been trying to fix for a couple days and haven't been able to.I am loading youtube videos in to movie clips with actionscript on a frame:
this.video_mc1.loadMovie ("http://www.youtube.com/v/URL");
this.video_mc2.loadMovie ("http://www.youtube.com/v/URL");
this.video_mc3.loadMovie ("http://www.youtube.com/v/URL");
[code]....
I am building a website that has a separate .swf for each page of the site. Each page is loaded into shell_mc using loadMovie. When a new page loads, I run shell_mc.unloadMovie before calling shell_mc.loadMovie(newPage). I am just wondering if the unloadMovie command will destroy everything in the current page that might take up memory before it begins loading a new page.
View 1 RepliesI am trying to incorporate the facility to recover an object that has been deleted by the user. When he presses delete, i unload the movieclip. So if I want to recover it, complete with its last width, height, x and y positions, how do I do it? Is there some inbuilt function? or do I have to use some programming to do it, like save the object properties before deleting and all? The object could be any one of about 5-6 of them in my library, so knowing at run time which one to attach is impossible. So I need something to recover exactly the movie clip that was unloaded. I don't think attaching a new one and setting its properties will work. Very simply, I could just set the _visible to false when he presses delete, but then, thats not a very good practice I feel.
View 9 RepliesI have created an interface that uses a lot of the loadMovie command using levels. Once I have loaded a movie on say level 3...in that level 3 movieclip I will have another navigation that will load and then use the loadMovie command to load movie on level 3 as well. It loads it correctly but the back button that would contain the unloadMovie(3) command isn't unloading, say if the user wants to go back.
View 2 Repliesi have a audio track in a movieclip that i am loading into a target and i am doing an unloadMovie to remove it from the stage, but the audio clip continues to play until it hits the end/loop point... so my question is, how to i make it stop as soon as it unloads?
View 3 RepliesI have an AS2 .swf being loaded as a child of a parent AS3 .swf. The AS2.swf calls loadmovie() and unloadmovie() to display 3 jpeg files. The images load the first time, but after that, a call to loadmovie() to replace the image, or a call to unloadmovie() fail. I found the following Adobe Bug report ([URL]) that has said this has been resolved, and also said that child movieclips could be replaced without a problem. Here is the code I'm calling.
[Code]....
unload some duplicated movieclips. Sometimes the script is not unload all the movie clips. And on frame 2, how to say by scripting "not go to next frame if all the movieclips is not unload"? Well the script is:
[Code]...
What (if any) is the actual differance between removeMovieClip() and unloadMovie() for use in erasing duplicated movie clips (using duplicateMovieClip() )? I was looking over some of my code and noticed I used both without much rhyme or reason as to why one over the other.
View 4 Repliesi have a little problem with the unloadMovie command. i have a button which is mc2_about here is the code
[Code]...
where i want to unload level1 which is a scrollbar with a text and load the portfolio section in an empty container... my structure i want to load in an empty container the swf's of the main navigation (home- portfolio,etc) and the sub-menus of it's categories[about me-print-web design) into levels. is there a simpliest way of doing that?
I'm trying to break a movieclip into pixels and then move each pixel independently, but am having a hard time wrapping my brain around the code.
Right now I have a MC on the stage with an image in it. I'm able to go through each pixel, copy them one at a time then add a tween like this:
Code:
function copyPixels() {
var rect:Rectangle = new Rectangle(300, 400, 1, 1);
var bytes:ByteArray = bmd1.getPixels(rect);
var bmd3:BitmapData = new BitmapData(1,1, true, 0xFF000000);
[Code]...
But that doesn't really give the effect I want. I want the whole image visible then have one pixel at a time fly off. How do I do this? Do I copy the entire image to a ByteArray then address each element in the array?
I've setup a dynamic Text Field, embedded uppercase, lowercase, numerals and punctuation and these special characters: Then I assign text to the Text Field like this:
[Code]...
I've got a for loop running in a function. I want to break out of the entire function if a condition is met in the for loop, and obviously carry on within the function if not. I've read a little about using labels, but I'm new to actionscript and most of it's going completely over my head. Here's my code.
[Code]...
i'm trying to put a line break in my xml attribute but the usual doesn't seem to work. Can anyone solve this? Cheers
<BUTTON NAME='BUTTON 1
TEST' DESCRIPTION='' MCCOLOR='0x000066' THEFILE='one.jpg'/>
How can I break line in the XML in a specific part?
I want this
DE R$ 999,99 POR 666,66
To be this.
DE R$ 999,99
POR 666,66
XML:
<price>DE R$ 999,99 POR R$ 666,66</price>
AS:
price_txt.Text = priceID;
I can not put a line break in xml.
Is it possible to break (Ctrl + B) a created textfield with AS, and have the letter instances named somehow? I need this to write a text animation.
View 11 Repliesi've read some other threads about this but i can't seem to get them to work with my script..i'm trying to fill my stage with squares to make a visual grid, using setInterval so it shows them animating across row by row. so far i have this:
[Code]....
however i've tried adding in code to make it break onto the next row after duplicating 50 but can't seem to get it to work no matter what i do..
How can I break line in the XML in a specific part?[code]...
View 4 RepliesI'm trying to take a string and break it into two parts. It's a url to a video on a RTMP server.So I've got to take this:
[URL] person17/1031617_person_generic_700kbps (note the removal of the ".flv" which is necessary as well).Right now I'm doing this, which seems overly complicated:
Code:
videoURL="rtmpe://emediadev.mysite.com/ffw/person17/1031617_person_generic_700kbps.flv";
videoURL=videoURL.substr(0,videoURL.length-4); //remove ".flv"
var urlArray:Array=videoURL.split("/");
[code]....
i'm using this code i got on-line, the text is being outputted through a dynamic text box, which is multi line enabled and html. Yet I just can't seem to get a single line break, i can get a double by doing a normal line break in notepad. But i need a single. And <br> doesn't seem to work.
Quote:
myLoadVars_lv = new LoadVars();
myLoadVars_lv.onLoad = function(success) {
if (success) {
[code]....
and my text file is
Quote:
variable1= 1) Blackpool 02 Academy, 14/4/10, 19:30, 4.50 <br> Liverpool 02 academy, 25/08/11, 13:00, 5.00
I make a XML connector component parse a XML document.In a node, there is a "<br />" (return to line in HTML)
<book>
<page>
Here some text and a <br /> here ! the code s broken up here
</page>
</book>
My XML connector considere the <br /> as the beginning or the end of a node !...How to avoid this <br /> or other any HTML element when parsing some XML ?