ActionScript 2.0 :: CS4 Play Check For Key / Play At End Execute Action
Apr 6, 2011
Root timeline: keyframe 1, keyframe 2, etc...
-keyframe 1 has a MC "frist MC"
-keyframe 2 has a MC "second MC", etc.
-the MCs are all duplicates containing different animation, but have the same AS inside them.
The construction of the MC is:Play intro animation -> Stop and wait for key stroke. If key is "space" set variable value to 1, if else set variable value to 0, then continue to play next frame. -> Complete the animation till the last frame.In the last frame check what is the value of the variable to check which key was been hit. If it was a space (var =1) go to root and play current frame +1 (go forward), Else, go to root and play current frame -1 (go back)Its a kind of slideshow.so heres the code in the middle, after the intro animation was played:[code] The problem with var reverse is, it works well in the first frame, its beign filled with value depending on what key is being hit, But in the last frame, when the time comes to check the value, trace says its "undefined".I have tried setting up a _global.variablename = reverse and it works in both frames (the check at the end is succesful, it detects the given value), but still the last frame only plays the currentframe -1 as if always executing the "else" command, no matter what the value of var reverse is.
View 1 Replies
Similar Posts:
Jul 14, 2011
I am trying to make a swf with one FLV playback player and 6 buttons. I've got 6 different videofiles that I want to have linked to this swf. Some of the videos are quit large.When starting the Swf, the first video has to start, after playing it, it has to stop. Then you must be able to choose which video to play by clicking one of the buttons. I don't want to have small thumbnails of the video, just plain and simple buttons.I have to have all my files, both fla, swf and xml files in the same directory (I cannot have them stored in different folders, since I have to upload this to a cms system which has limited upload properties).
I've tried to find the right script on the internet, I'm not very good at scripting myselve, actually rather poor educated there.It seems to me that I have to make an xml file with a list of all my videos, I have my default swf ready, with a FLVplayback and buttons.Now there's just the coding part....
View 1 Replies
Jul 29, 2010
I want to play a MovieClip and then execute a function immediately upon the clip's completion. I don't know of any event listener in as3 that will do with trick.
View 3 Replies
Feb 27, 2003
PHP Code:
// button
page1_btn.onRelease = function(){
action = function(){
_root.gotoAndPlay("page2_label");
};
play();
};
// last frame
action();
[Code] .....
How a transition can play out and then call the next action (ie, loadMovieNum, in this case). Am I right that senocular calls the "action" function in the last frame of the loaded page (or swf)? And that "action" would be the loading of the viewer selected content?
View 2 Replies
Jul 12, 2011
I would like to desactivate my buttons bt01 bt02 bt03 I take an example with button bt01. When you roll over bt01 you can see lapalm but when you roll out bt01 and after you directly roll over bt01 again (without rolling over bt02 or bt03 before) I would like to desactivate the action lapalm.play();on the button bt01 (I don t want that la palm play again)
[Code]....
View 4 Replies
Jul 9, 2011
I'm trying to pause a movie using a stop action. I'm using a button to do this. This is in the actionscripting attached to the button.
on (press) {
stop();
}
The button is in the main movie so I don't get why it's not working. I'm also trying to add a button next to it that would play the movie, after pausing it.
View 5 Replies
Sep 29, 2009
The slideshow on the left is the one I'm talking about, not the Flash video on right.
Anyway, to make it work, I added a whole bunch of frames between the moving images to pause it - to give reader time to see pictures and words - then it goes on to next one. instead of doing it this way, I am wondering if I can just put an action of some kind on a frame to tell it to pause for X number of seconds, then play again?
View 7 Replies
Nov 9, 2009
In the app I'm working on (AS 2.0) I have several buttons. I've added an action to each of those buttons:
on (release){ gotoAndPlay("fr_test");}
When in Flash, if I enable (Control) Simple Buttons and Simple Actions, this action works like it should. If I test the movie or publish it, the action doesn't execute.
I've tried another approach with one button. I added an empty layer for actions only, and added the following code:
this.test_btn.onRelease=function(){ gotoAndPlay("fr_test");}
This doesn't work at all, nor in Flash nor in the player. I wonder what I'm doing wrong here. Changing fr_test to the frame number does not change anything.
View 1 Replies
Jul 20, 2005
This is my as:
[Code]...
For some reason, the external movie I'm loading into level 5 in the first red line won't execute the action below it, to make the loaded movie play a clip on its main timeline (contentSlider) from frame 16. It just keeps going to the first frame of the movie and nothing else.
View 3 Replies
Oct 21, 2009
This would be done upon click of one of the buttons I have on the stage. That button also needs to execute a different class I have programmed. You can even just tell me what to search under to find out this data.xplanation: I have 2 different classes. Buttons class and Videos class. Buttons class loads the stage with 9 different buttons. Each button is supposed to lead to its own video. (I have the buttons ready with programming to load the video and all of the programming works). The Video class loads the video onto the stage and has the controls for it to play, pause, stop etc (works pretty much..).
View 2 Replies
Oct 9, 2002
How do i get a letter to work inside of a key.isDown action?
View 6 Replies
Oct 20, 2009
how to clear the stage of everything I have loaded it with. This would be done upon click of one of the buttons I have on the stage. That button also needs to execute a different class I have programmed. You can even just tell me what to search under to find out this data.
Explanation: I have 2 different classes. Buttons class and Videos class. Buttons class loads the stage with 9 different buttons. Each button is supposed to lead to its own video. (I have the buttons ready with programming to load the video and all of the programming works).
The Video class loads the video onto the stage and has the controls for it to play, pause, stop etc (works pretty much..).
Now, I am not sure what code to put under each of the buttons to clear the stage and load the Video class.
View 2 Replies
Feb 27, 2012
I have created two buttons for separate audio files. Essentially if you click on the button it will play and stop. This works great! I have also injected a SoundMixer.stopAll(); to ensure if you click between both buttons that it will stop the current audio file to play the next one. My problem is when I select the 2nd button for the first time everything seems to be working...it's when I attempt to click on the first button again, that it will require 2 clicks and then it stops and plays accordingly...anyone know how I could eliminate this annoying two click process?
[Code]...
View 1 Replies
Sep 1, 2010
I want a movie clip (let's call it homecontent_MC) with 100 frames play to frame 80 and stop.Then when someone clicks a button on the navigation bar (home, about, services, contact, etc...) homecontent_MC would then begin playing from it's position (frame 80) til it reaches 100, at which point it wouldn't be on screen, and the movie clip that corresponds to the navigation button press (say services_MC...) would start from frame 1 and continue til it stops at it's frame 80...
View 7 Replies
Nov 5, 2010
I got a bunch of live stream from FMLE, say: "FMLE_channel1", "FMLE_channel2", "FMLE_channel3". And then on the server side, I created several corresponding republished stream called "channel1", "channel2", "channel3".
On periodical basis, we call Stream.get("channel1").play("FMLE_channel1", -1, 10, true) every 10 seconds. Similar things were done on the second channel & third channel.Soon after the above Stream.get("channel1").play() call, I should get the following events in sequence:info :NetStream.Unpublish.Successinfo :NetStream.Publish.Startinfo :NetStream.Play.Resetinfo :NetStream.Play.Start In the above case all are happy. Clients can view channel1, channel2, channel3 well.But then after a while, one of the three channels, in most case it would be channel1, will not be viewable.
With the server trace info, I found that after the Stream.get("channel1").play() call, only the following two events exists:
info :NetStream.Unpublish.Successinfo :NetStream.Publish.Starti.e. I was missing the play.reset and play.start event.I further checked and confirmed that the FMLE was publishing all three channels fine to the server. I was able to view the "FMLE_channel1" from flash clients, but not the republished "channel1". the version is FMS 3.5.0.
View 3 Replies
Jan 22, 2011
I play games on Pogo and have never had a problem with their Flash Games until released Daily Hot Shots. It doesn't load fully and I've done EVERYTHING I know to do to get it to play. No errors show up. I can play ALL the other flash games but this one. When I right click, the name of the site's owners do not show up....I have the settings showing though Not all of the game loads and that's the problem. I've tried uninstalling and reinstalling....tried a different browser and have the same exact problem. THIS GAME WILL NOT PLAY.
View 2 Replies
Oct 11, 2009
I have five different scenes all including three different buttons. When I test the buttons in "play scene" - all buttons sounds correctly in all scenes. But when I play movie, there is sound only with one button (the same button in every scene). I have looked for differences, but this button seem to have all the same parameters as the others.
View 10 Replies
Nov 7, 2009
So this is my code so far:
on (press) { // Gives your movie a button functionsgetUrl("http://www.astahost.com");}
on (rollOver) {this._alpha=100;gotoAndPlay("Scene 2"); }
[Code]....
when i play the movie, it plays scene 2, however, scene 2, which is in my flash document, plays automatically. how can i stop this? is there some code which only makes scene 2 play when called for and not play automatically.
View 1 Replies
Jan 14, 2010
So i've made my .swf files. The only thing is they all play at full screen when i play them using my web browser. I need them to play at 548 x 408. when i open the .fla and go to properties it says the size IS at 548 x 410 but it can't be if its playing full screen.
View 2 Replies
Mar 8, 2010
I have several products I want to animate with graphics and text individualy then stack them on a time line for output with play and pause buttons. Is there a tutorial somwhere that shows you how to do this? and how do I stop the entire animation on a frame, I don't understand "not_set_yet"
View 4 Replies
Jul 29, 2008
simple one this, or so i thought! basically, i want a mc to play from start to finish (11 frames) upon rollover and upon rollout i want it to play backwards to the first frame. Accurately.
ActionScript Code:
on (rollOver) {
if (activ.currentFrame <= 11)
{
[Code]....
Currently i JUST goes to the next frame. So i need something like currentFrame +1 or something?
View 7 Replies
Sep 9, 2003
to a frame I want to attach 2 conditions which an action has to fulfill before it can execute something.
so:
if (particularVar == Yes AND anotherniceVar == 25) {
thisfunkyMC.gotoandStop(49);
}
but obviously, this doesn't work.How do I have to correctly formulate it so I can put two conditions side an If statement, before something will be executed?
View 4 Replies
Sep 21, 2009
I have modified the original to include more head shots accompanied by audio clips. I have worked out the playing of the clips on release. I realize now that people may not want to listen to entire clip. Each mug shot serves as the button to hear the person talk. I do not know how to modify the button code for it to be a toggle. I guess it would need to be some kind of "play if, stop if" The only part of concern is loading playing the the audio, no changes need to be made to the rollover functionality.
mugWidth = 60; //change these if you change the size of your mugshots
mugHeight = 60; //change to your mugshot height
//instantiate sound and textformat classes
[code]....
View 2 Replies
Jan 6, 2011
how would you play the next 5 frames if the space bar was clicked and then stop the playhead?
View 4 Replies
Jul 23, 2004
I am creating a site, and it has a animation that it has to play before loading the next section. What I cant figure out is what function I need to create so that when a user clicks on the vision button it will play the frame after stop(); which will close that section, then have it load the frame for the section that the person clicked on. The only way I can think of doing this is creating 3 different close animations for the three sections. But I figure there has to be a way to have it play the one close animation and then goto the frame which is the portfolio section or vision section (depending on the button clicked).
View 1 Replies
Jul 23, 2004
I am creating a site, and it has a animation that it has to play before loading the next section. What I cant figure out is what function I need to create so that when a user clicks on the vision button it will play the frame after stop(); which will close that section, then have it load the frame for the section that the person clicked on. The only way I can think of doing this is creating 3 different close animations for the three sections. But I figure there has to be a way to have it play the one close animation and then goto the frame which is the portfolio section or vision section (depending on the button clicked).
View 1 Replies
Jun 3, 2011
it's possible to change the default key (space bar key) to execute the action of the focused element in the stage?If you ever worked with the Focus Manager you've possibly seen that when you press the space bar the focused item is "executed".Can you disable that "executor" or can you change the space key with the enter key?
View 2 Replies
Mar 23, 2010
I have a "movie player" that plays flv files using the code below (videoToPlay is the name of the file to play and is just a string). I want to use the same setup to play an mp3 file also.I tried using mySound = new Sound(); and then mySound.attachNetStream(ns);, but it gives me this error: 1061: Call to a possibly undefined method attachNetStream through a reference with static type flash.media:Sound.
View 5 Replies
Nov 4, 2010
1) What is the recommended/best practice method for loading videos (flv, f4v, mp4, etc.) from a play list. Some of the files might be on the local file system, some might be on a streaming server and uses rtmp.
2) Does the VideoPlayer.play internally use NetStream/NetConnection objects? I could get the files to play using both these methods - not sure if one is better than the other. I didn't see any references about streaming in the VideoPlayer.play method - but it does work with rtmp URLs!
3) For a long running standalone application, how do I make sure the VideoPlayer/NetStream objects are properly released/garbage collected? Right now I am closing the netstream/netconnection after playing every file - mainly because I do not know which server/file system the next video is being loaded from.
View 6 Replies
Aug 4, 2010
Ive tried to impliment everything I could find. No luck. I have an xml playlist with external .as files for an mp3 player. Here is my code. My code is below.
// Setup sound object
var s:Sound = new Sound();
s.onSoundComplete = playSong;
[Code].....
View 9 Replies
