I'm using Flash 8 and AS2 I am attempting to make some code that checks whether or not a line that rotates around the screen is hitting a movie clip. Here is my code (with comments explaining it):
[Code]....
I have been tasked with trying to create a drawing tool that draws dotted lines as you drag the mouse across the stage. I can easily capture the points on MouseEvent.MOUSE_MOVE and store them in a vector and then draw the points as dots:
The problem is that I need to calculate evenly distributed points on an ever growing Vector of points so I can only draw the line between say every 5th point (say using modulus). I have been battling away with Bezier curve equations both Quadratic and Cubic but still can't quite figure out how to convert my Vector of points into an evenly distributed Vector of Points without sucking the life from the CPU.
I'm in the process of teaching myself the components of the CS4 Design Premium package using the Adobe Classroom in a Book series. I'm currently going through the Flash CIAB and i've started using the pen tool. The task involves creating a wave like design across the stage. Whilst this in itself is simple, the final instruction is to click on the first anchor point to close the shape. In the illustration, the closed shape seems to automatically extend around the stage, however when I click on the first anchor point, the line automatically connects between the two points in a straight line.
Am I doing something wrong? The next step is to fill this area, but with the straight line effect that I am getting, this becomes impossible. I should point out that the instruction states that the pen tool line should extend off the stage. I have done this, but even then on clicking on the first anchor point the shape is closed incorrectly.
I'm making a very simple game that lets you draw a curve by hand (using lineTo to the mouse position on mousemove) but now, I need to check wether the line intersects wiith another part of the same line (e.g. a loop)
I first used an onrollover command, and that worked, but not always because the mouse moved too fast (same with hittest with mouse). Then I pre-drawed the line in another mc, used hittest on it, and if it wasn't intersecting, draw it in the real mc. But that didn't work because it used the bounds to test. I guess the best way is to use some mathematical formula, but that would mean I have to save all my coordinates in an array..
I want to create line between 2 points ...such tht the line will start when i click the point A then i will drag the line by holding it to point B and i will join the line to point B by clickin on point B (somethin like the pen tool) ..then line will then be joined between the points ...
View 1 RepliesI have a component (link to Test class) which contain one line in it, and I put one point of this line to (0, 0).
Then drag it to Flash(fla), and get its Shape in AS3 like:
// in Test.as
// assume that the movie clip only contain one line.
var line:Shape = Shape(getChildAt(0));
And I can get one point of this line which is x and y of var line. But how to get another point of this line?
Edit:
Ignore component stuff above, here has another question but I guess it pretty much the same as the question above:
Draw a line from (0, 0) to (10, 10) and draw another line from (10, 0) to (0, 10), how to get those lines of two-point form in AS3?
If I access them as Shape then I get two similar shapes which have same x, y, width and height values. Does AS3 has some way to access line as a REAL line not just a shape? or does it has any way I can calculate it out?
I want to ask how do you join two points with a line using actionscript? The points would be constantly moving.
View 9 RepliesI have a line that is drawn using the draw api. I need to find points on the line when given the x value, how would I do this. I know on the bezier segment I can just user the yForX() and get the value but not sure how to with just a straight line.
View 5 RepliesI need to create a line drawn between 2 points. My actual idea is of joining 3 points with lines drawn dynamically(for a triangle).
View 1 RepliesClosed path made with pen tool in Flash MX comprises of line segments & curved segments both.While adding anchor points on segments it is noticed that pen tool adds anchor points on curvaceous segments but not on line segments. Why is it so ? Is their any way to accomlish this task ?
View 5 Repliesfind a points in a line Actually i want to make some footsteps in a sand. The footsteps are dhynamically placed on the stage. How to find the points in a dioganal. see the image
View 1 Repliesi'm trouble to find a points in a line Actually i want to make some footsteps in a sand. The footsteps are dhynamically placed on the stage. How to find the points in a dioganal.
View 1 Repliesdraw a squiggly or wavy line in the MOUSE_MOVED event as the user clicks and moves the mouse.
View 1 RepliesI am trying to draw a continuous curved line in flash. There are many methods but none of the ones I have found so far quite fit my requirements. First of all, I want to use the flash graphic api's curveTo() method. I DO NOT want to simulate a curve with hundreds of calls to lineTo() per curved line segment. It is my experience and understanding that line segments are processor heavy. Flash's quadratic bezier curve should take less CPU power. [code]...
View 3 Repliesthis is the thing: Using "lineTo" i get a line drawn on stage when dragging a mc. Then i should have four mc (note1, note2, note3, note4) added randomly over this line. I mean, the line is drawn and then over some parts of this line, using x and y of some of the points drawn there, this movie clips should be added randomly. I can make the mc appear randomly, but always in the same point (mouseX, mouseY); i cannot access others x and y of the drawn line. This is my code (noteContainer is a sprite):
Code:
private function drawingAPI(event:MouseEvent):void{
sprite1.graphics.lineTo(mouseX, mouseY);
}
[Code]...
I think it would be cool if the line started out as flat (i.e., y=_height/2 for all points) and then the y points of the line animate into place.I don't even know where to start with doing this in TweenMax/Lite... I've seen several code snippets that draw a line from left to right, but that's not what I want.
View 6 RepliesIs there someone who is good at trigonometry? I have two points punkt1 and punkt2 and a line that is drawn between them. Both points is dragable. I want the line to continue after the points in both directions and with the same steep. I have counted the steep between point1 and point2 and tried to continue to drag to a point with the same steep, but it doesnt succed.
[Code]....
I am trying to implement contour lines in ActionScript using Conrec. I have looked at both the java and javascript implementation and am still stuck.URL...Conrec will take grid data and assemble continuous contour lines. The problem is that it does not necessarily draw those lines in a continuous fashion. For example, it will draw A->B and then C->B and then C->D instead of A, B, C, D, etc.The javascript implementation seems to be accounting for this and serializing the instructions into an array of draw points. Which is what I too want to accomplish in the end. That is it takes the instructions from the core Conrec logic (eg: A->B, C->B, C->D, etc) and organizes it into an A, B, C, D series. I think it will also return the series as a multi-dimensional array to accommodate broken lines (eg: [[A, B, C, D], [E, F, G]]). This last functionality is what I need to do in Actionscript.This last part is where I am stuck. Ignore Conrec for now (I have given up on finding an Actionscript implementation), how can I organize these instructions into a collection of serial points? When Conrec gives me "draw point from X->Y" how can I first check if X or Y are already in a series and append either X or Y (whichever is not in the series) into the series? AND if neither are in the series, start a NEW series with X, Y as the starting set. Then check subsequent instructions against all existing series and connect series if they now start and stop on the same point? Also, I need to be able to allow for a series to close itself (eg: A, B, C, A) -- a loop (is that even possible?!).
I'm not sure if there is a technical term for what I want to do beyond "concatenation". I also hope someone out there has done this with Conrec and can give me some pointers.In the meantime, I am going to continue to plug away at this and see if I can come up with something but I am not confident in my abilities.If you know another way to draw contour lines from grid data, I am open to alternatives. But I have to be able to implement it in Actionscript.
I have a large-ish array of points.
The graphics object I am using has it's alpha value set to 0.1.
When these points are plotted iteratively, and the line being drawn overlaps another line drawn earlier, there is no visible change in the colour at the intersection.
If I draw the line differently, not using an array of points, the alpha is not ignored.
ActionScript Code:
public function render(e:Event):void
{
if (segmentsCollection.length > 0)
[Code].....
This all occurs on each ENTER_FRAME event until the array is emptied.
I have tried loads of options but the alpha is always ignored.
Is there a way to check if a string contains different characters in just one line?
//this would be for just a:
if (stringAnalyzed.indexOf("a")!=-1){
//whatever actions;
}
[code].....
I know this doesn't work. What is the right syntax?
Given a MovieClip containing a vectorshape (loaded from the library) - is there a way to check whether a line (from point(x1,y2) to point(x2,y2) intersects this shape?
View 1 RepliesI've for a while now been trying to work out an efficient way to see if something is in something else's line of sight. A good example is having a sphere that fires a rocket at you if it can see you - but obviously not if you're behind a wall.
Here's how I generally went about doing this:
function cast(end:GameObject, walls:Array, accuracy:uint=10):Object
{
var xp:Number = skin.x;
var yp:Number = skin.y;
[Code].....
Works, but as we know this will get extremely slow with each new rocket added or as the amount of impassable objects increases.
I'm assuming there's a really simple efficient way that I'm missing - I mean, all games do it (Diablo, etc) with hundreds of enemies that don't do anything unless you're visible.
How to make somethig that will check all var's on the objects in the _root time line? lets say "allObjects" means all the objects in the _root time line:
Code: Select allif(_root[allObjects]._loc1==1){
doSomething()
}
So lets say that I have 20 pieces of an "A" MC and one of a "B" MC, 10 of the "A" MC have the code "_loc1=1" and the rest have "_loc1=0" and if I roll over the 10 A MC that have _loc1=1 the B MC will gotoAndStop(2) but if I roll over the rest of the A MC's nothing happens.
(the A MC's have different names like: planetX; ship21; enemy61; ... )And a var in the _root time line will have the name of the MC that has the mouse over it (rolled over it)So something like: var MCname = "planetX"
I have 2 points you can drag. A draw a line between them. I have a textbox that displays the distance between the 2 points. How can I have the textbox "attach" itself to the midpoint of the line and stay there as the points are dragged?a file is attached and you can see it here [URL]
PHP Code:
var item:MovieClip;
var dragOffsetX:int;
var dragOffsetY:int;
var itemOffsetXY:int;
[code]....
I'm working on this sliding bar navigation thing , and I'd like to make the bar "snap to" certain points along the line.
View 5 Repliesi have an xml file and i want my code in flash to read it line by line but its only showing the first line out of 5 lines.Below is the code:
var NigeriaNumber:Number;
var stateName:String;
var year:String;
[code].....
See [URL] Now there is a button called Answera, which when clicked should have a symbol (movie clip) called Check appear at the cordinated specified. Check exists in the libary (but does not have an instance name) and no where else on the stage. when I run this code I get: 1180: Call to a possibly undefined method Check. -> var rightCheck = new Check(); How is it undefinded if it exists in the libary?
View 7 RepliesThe following is my codes. This is still work in progress; so, you will see some functions with empty contents. Plus, this is my first Flex application; please bear with me. This is a quiz application that gets the questions and answers to each questions from a ColdFusion web service. There are three types of questions, True or False, Multiple Choice with single selection, and Multiple Choice with multiple selections. So, based upon the question type, the application would dynamically generate the appropriate amount of radio buttons or check boxes for the users to select. I got these working. The problem that I am having is, I am not sure how to check what the users have actually selected. In some other forums and posts on other web site, it said that I can use event.currentTarget.selectedValue to get the user selection. But when I actually do it, I got a run-time error saying, "Property selectedValue not found on mx.controls.FormItem and there is no default value." My question is, what do I need to do to capture the user selections?
[Code]...
I am trying to create a mindmap where the user can drag points about the screen. I have gotten as far as drawing the line via actionscript, and drag+drop the points (defined as movie clips on stage). This is the existing script - I don't know how to get the lines to follow the points. Something to do with ENTER_FRAME or updateAfterEvent?
var line:MovieClip = new MovieClip();
line.graphics.lineStyle(1,1);
line.graphics.moveTo(ptOne.x,ptOne.y);
[code]....
I'm trying to work out how to create a simple demo that works as follows: A ball falls from the top of the stage.Player is able to draw a line anywhere on the stage. The ball will bounce/roll along the line such that the player can guide it at will. I don't think the coordinate rotation will be a problem for me but I can't figure out how to transform a line drawn by the player into a hit detectable sprite -- or realkly any way that I can get those line coordinates into my coordinate rotation routine. To keep it simple, I'm just working on the first part of the problem, getting the line to where I can hit test or know its position.Here is my code so far:
package
{
import flash.display.Sprite;
import flash.events.MouseEvent;[code]........
It always traces 0,0 instead of my current line coordinates - and even those I don't think would be sufficient.
