I want to do is create a mindmap that zooms in on a branch when you click on it... (using actionscript, not motion tween). At the same time the red square of the overview menu (view example-files below) should also align with that branch... once you click on the overview menu, the whole thing should zoom out to its "up-state"...
View Mind Map "up-state" here.
View Mind Map "zoom-in" here.
View Overview Menu here.
How to draw mindmap with actionscript3
View 0 RepliesI am trying to adapt Ruben Sweringa's Flex-based interactive mindmap [URL] and I've got most of it sussed out. I'm just having a little difficulty with the tooltips and I was hoping someone/some people might be willing to help me out or offer some guidance on these three things:
1) How and where do I set hideDelay to Infinity so the tooltips don't disappear? I think that because Ruben's model uses FXCToolTip and FXCHTMLToolTip to extend ToolTip and ToolTipManager, if I try to modify ToolTipManager.hideDelay in the mxml, the value is ignored.
2) Is there a way to enable HTML formatting in the tool tips? FXCHTMLToolTip looks like it's supposed to read this code, but whenever I add such coding, Flex says "Error: XML is invalid" and the whole mindmap fails.
[Code]...
My code allows you to be able to move your character the arrow keys, I put a loop in so that the character will move a lot more smoothly. but with this loop in my character just flys of the stage when i run the application.
[Code]....
Im trying to implement a mini browser in adobe air. The browser should work in the same ways as a mobile phone browser, i.e. fit the width of the website to a certain width(specified within the html component) and leave the height to be scrollable. I have managed to do a mini browser by using the scaleX,scaleY properties of the mx:HTML component however these make the websites look unreadable. I have also tried setting the css3 zoom property, and that works fine, but it only zooms out certain elements, therefore messing up the site layout. My question is: Is there a way to make a mini web browser which shows the full content of the website?
View 1 RepliesI'm trying to make a tween to a picture so that it zooms out and back in to the center and back. There appears an error of placement depending on z coordinate: the picture moves a little bit towards top-left corner of the stage. How can I make it move to the center of the stage?
View 3 RepliesI have an application that zooms in and out a movieclip using the matrixTransformer. When my code is in the timeline, everything works fine. However if I put the code in a class, it gives me these two errors:[code]So my guess is that the class is not importing matrix class for some reason however i have no idea how to fix it.
View 1 Replies[Code]...
If movie A is loaded and I click button B, I need movie A to do a small animation where it zooms out and once that is done movie B can zoom in.
I've attached the example files I'm working with. I have a zooming component that zooms in my flash file by loading it with an .xml file, but the buttons don't stay over the buttons once it gets loaded into the component. The buttons move off into space.
View 4 RepliesJust joined this forum and getting back into flash after a few years away, im currently using AS2 and was wandering if there was a way to create a zooming effect which zooms on the z axis in AS2the zoom starts way off in the distance and then zooms all the way off the screen.
View 3 RepliesI'm attempting to make a flash file that zooms into a vector image of a map. For example, having a whole map of the United States then clicking New Jersey and having the stage zoom to fit only New Jersey.
I started to achieve this with tweening (which didn't work, which is why I'm posting my code), but I feel like there has to be a better way. I've been looking at fl.transitions.
[Code].....
I do not have a good background in flash, I tend to avoid it as I look at actionscripting and think, Time.
Problem is, And I already have this already made too, A black bubble that when a button is clicked, A small black circle appears and expands, Fading away as it does so.
I already made that, And it works, But the bubble is only there for the time that I click the button. If I let go of the mouse button before the bubble has fully expanded, It stops expanding and cuts off.
How do I get the bubble (Which I have as a movie clip in library already) appear and stay appeared one the user has clicked and let go of the mouse button?
I'm fairly new to ActionScript and was wondering if anyone had an idea how this effect was done:[URL]..Click on a show date and the link zooms up and fills the screen giving show info. Then when you click the back button it shrinks back to where it was on the calendar.
View 3 RepliesDo I have to have some CS version to create Flash ads or can I use some sort of Actionscript compiler? I just want to create very basic Flash ads that can be clicked.
View 1 RepliesI have 4 navigation button and like home, about us etc.... And i want to disable home when it is click and cannot clicked it until the user click another button first. means if a visitor is at home page then home navigation is disabled, and all other are active, and when they click at aboutus button then the pages goes to the about us page and the about us button is disabled and other get active. I want this solution in AS3 with oop concept.
View 6 RepliesI've got about 6 buttons laid out, one on top of the other in a list format. In their normal state the buttons are grey in colour, when I rollover them, the buttons flash and turn to orange. Now, what I need to happen is this: I want the buttons to stay orange once clicked and only roll out back to grey when the user has clicked on another button in the list. I've been told that the best way to do this is via adding a listener, however I am a little unsure as to how to go about this. I've checked the flash help file and have a basic understanding of how listeners work...but can't really wrap my head around applying it to this situation. Perhaps I will need to have all the buttons as separate broadcasters?
View 2 RepliesI have parent movieclip and in that many different children movieclips
What i want to do is when i CLICK, i want to detect which movieclip it has clicked and call corresponding function (defined by onpress event) of that movieclip.
What does the code look like if I want the user to click two specific buttons then go to a new frame. I've been trying different methods, but I am honestly not brilliant with conditional statements. This is what I've got so far...
about_btn.addEventListener(MouseEvent.CLICK, clickAbout);
home_btn.addEventListener(MouseEvent.CLICK, clickMain);
if (function clickMain(event) && function clickAbout(event))
[code]....
I haven't been able to find a solution that fits my project. I am working on a 50 state map, where I need each state to stay down once clicked, but go up when any other state is clicked. [code]...
View 9 RepliesHow can I make it stay the rollon color after it's clicked and then the rolloff color when another button is clicked?
[Code]...
I have a flash file from istockphoto that I purchased. It is of the US. When you mouse over a state it is highlighted. I want it to take you to a web page when you click the state. I have bee trying to get it to do that, but I am very lost on how to make that happen.[url]...
View 10 RepliesI have many movieclips on stage, let's say 100.Rather than setting onRelease or OnPress function for each one, is there any way of looping through all the movie clips (maybe if they were called MC1 MC2 MC3 MC4 etc etc), using an array, to see which one was pressed and then say what should happen if so and so MC was pressed.
Depending on which MC is pressed a variable will be a different number... e.g. MC1 pressed means variableA = 1, MC1 pressed means variableA = 2, MC1 pressed means variableA = 3 etc
I just thought there would be a more intelligent solution than writing out this 100's of times: MC[numberOfMC].onPress = function() { do something };
This is just ridiculous! I just saw another video on this site preaching the gospel of AS3.Look, Im sure it's great in many ways that I dont appreciate or understand but come on! Would it be too much to ask that if I am in 'designer' mode, I could say, right-click on a button and add a URL to it when clicked?? Now I have to write a function to achieve this???
I think Flash needs to be broken into parts that cater to both designers and developers.Not all of us that faithfully buy Adobe products have in house development teams to do our bidding.
I made a contextMenu for my list. Then i have a function like this for [code]...
How can i get to know which listItem was clicked?
I was hoping that the "e.mouseTarget" would be an item, but its a list's CellRenderer.
I set an event listener on each mc kept in an array with this snippet:
ActionScript Code:
for(var j:uint = 0; j < _peons.length; j++)
{
_peons[j].addEventListener(MouseEvent.CLICK, selectThePeon);
}
Now I would like to know which mc has been clicked and move it to another array called _activePeons. So How can I do this?
ActionScript Code:
private function selectThePeon(e:MouseEvent):void
{
}
i am trying to make a photo gallery so when people click on a thumbnail it expands to full screen, my problem is i have lots of pictures and i want to determine which one has been clicked. i thought i would use the e.target in a simple if statement like this:
[Code].....
in this picture one and two are both on the stage with instance names of picture and picture2.
I have a simple question for someone --Im very new at Flash. I have a box and 3 different colored buttons at the left. When a person clicks the red button the box turns red, green button turns the box green, etc. My question is I would like the text color of the box to appear under the box according to what button they press. Here is my code to turn the box red. What line would i add to have the word Red show up under the box when the red button is clicked. Do I type the word Red and make it a movie clip? Then what?
[Code]...
I have a bitmap with a different bitmapData on it (done through copyPixel) and I was wondering whether there is built in function that can determine what BitmapData the user is clicking on? how to best figure out which BitmapData is clicked, or do I have to do x,y pos comparisons manually?
View 8 RepliesI've got music player and one of the controls is a movieclip which acts as a PLAY and PAUSE button. What I would like is to swap the image of this movieclip everytime it's clicked. How would I go about doing this? Here's my code...
[Code]...
I have created a basic movie clip form:
Email
Name
Message
Submit
All is working exactly as it should but when you click on the submit_mc it's look remains the same whether the mouse is up, down or over. It works and sends the email to the named email address but if I was a new user to this form - I would probably click and click and click - not knowing if the message actually went as we are all use to seeing the button area change shape and color when clicked (looks like you are depressing the button)
I can skin the submit_mc but that only changes it's color/shape, it does not change up, down or over interaction with the mouse.